Rightmark Audio Analyzer
We used Rightmark Audio Analyzer together with a loop-back cable to analyze the quality of the on-board audio solution.
For easier comparison we summed up the individual scores of all tested boards (1: Very poor, 2: Poor, 3: Average, 4: Good, 5: Very good, 6: Excellent).
The sound quality of the 939Dual-SATA2 on-board audio is very respectable. It's better than all other tested nForce4 motherboards.
Summary
Frequency response (from 40 Hz to 15 kHz), dB: | +0.18, -1.12 | Average |
Noise level, dB (A): | -80.8 | Good |
Dynamic range, dB (A): | 75.2 | Average |
THD, %: | 0.038 | Good |
IMD, %: | 0.079 | Good |
Stereo crosstalk, dB: | -78.6 | Very good |
IMD at 10 kHz, %: | 0.140 | Average |
General performance: Good
Frequency Response
Frequency range | Response |
From 20 Hz to 20 kHz, dB | -7.85, +0.18 |
From 40 Hz to 15 kHz, dB | -1.12, +0.18 |
Noise Level
Parameter | Left | Right |
RMS power, dB: | -74.2 | -74.5 |
RMS power (A-weighted), dB: | -79.9 | -80.8 |
Peak level, dB FS: | -54.9 | -55.6 |
DC offset, %: | 0.44 | 1.80 |
Dynamic Range
Parameter | Left | Right |
Dynamic range, dB: | +72.4 | +73.5 |
Dynamic range (A-weighted), dB: | +75.2 | +77.7 |
DC offset, %: | 0.43 | 1.79 |
THD + Noise (at -3 dB FS)
Parameter | Left | Right |
THD, %: | 0.0407 | 0.0377 |
THD + Noise, %: | 0.0714 | 0.0731 |
THD + Noise (A-weighted), %: | 0.0686 | 0.0658 |
Intermodulation distortion
Parameter | Left | Right |
IMD + Noise, %: | 0.0805 | 0.0791 |
IMD + Noise (A-weighted), %: | 0.0644 | 0.0638 |
Stereo crosstalk
Parameter | L <- R | L -> R |
Crosstalk at 100 Hz, dB: | -75 | -76 |
Crosstalk at 1 kHz, dB: | -76 | -78 |
Crosstalk at 10 kHz, dB: | -74 | -71 |
IMD (swept tones)
Parameter | Left | Right |
IMD + Noise at 5 kHz, %: | 0.0771 | 0.0736 |
IMD + Noise at 10 kHz, %: | 0.1369 | 0.1356 |
IMD + Noise at 15 kHz, %: | 0.2051 | 0.2094 |