Fan Noise

In the past years users would accept everything just to get more performance. Nowadays this has changed with people being more aware of the fan noise and power consumption of their graphic cards.
In order to properly test the fan noise a card emits we are using a Bruel & Kjaer 2236 sound level meter (~$4,000) which has the measurement range and accuracy we are looking for.


The tested graphics card is installed in a system that is completely passively cooled. That is passive PSU, passive CPU cooler, passive cooling on the motherboard and Solid-State HDD.
This setup allows us to eliminate secondary noise sources and test only the video card. To be more compliant with standards like DIN 45635 (we are not claiming to be fully DIN 45635 certified) the measurement is conducted at 100 cm distance and 160 cm over the floor. The ambient background noise level in the room is well below 20 dbA for all measurements. Please note that the dbA scale is not linear, it is logarithmic. 40 dbA is not twice as loud as 20 dbA. A 3 dbA increase results in double the sound pressure. The human hearing is a bit different and it is generally accepted that a 10 dbA increase doubles the perceived sound level.

ASUS has implemented almost no temperature based fan control on their card. The fan has the same noise levels in both idle and load which isn't an optimum solution. The idle temperature is very low, so there is a lot of potential for improved fan settings. It is my impression that ASUS relies too much on their bundled software and expects the user to manually tweak the settings to his liking. I prefer good default settings out of the box.

My sample had a clicking fan that sounded like the fan blade would touch a cable from time to time. The clicking went away after a while and came back randomly. ASUS confirmed that the problem does not exist on other samples they have and retail boards are not affected. If your fan clicks, just RMA the card.