Rightmark Audio Analyzer
We used Rightmark Audio Analyzer together with a loop-back cable to analyze the quality of the on-board audio solution.
Summary
Frequency response (from 40 Hz to 15 kHz), dB: | +0.25, -0.31 | Good |
Noise level, dB (A): | -79.1 | Average |
Dynamic range, dB (A): | 79.2 | Average |
THD, %: | 0.010 | Good |
IMD, %: | 0.036 | Good |
Stereo crosstalk, dB: | -77.2 | Very good |
IMD at 10 kHz, %: | 0.108 | Average |
General performance: Good
Even though the Realtek ALC882 audio codec has support for 8 channels, which would let you think the audio quality is very high, the sound quality is only "good", which is actually slightly below average of the motherboards we tested so far.
Frequency Response
Frequency range | Response |
From 20 Hz to 20 kHz, dB | -1.66, +0.25 |
From 40 Hz to 15 kHz, dB | -0.31, +0.25 |
Noise Level
Parameter | Left | Right |
RMS power, dB: | -76.7 | -76.3 |
RMS power (A-weighted), dB: | -79.1 | -79.1 |
Peak level, dB FS: | -64.1 | -63.6 |
DC offset, %: | -0.00 | -0.00 |
Dynamic Range
Parameter | Left | Right |
Dynamic range, dB: | +77.0 | +77.3 |
Dynamic range (A-weighted), dB: | +79.2 | +79.2 |
DC offset, %: | -0.00 | -0.00 |
THD + Noise (at -3 dB FS)
Parameter | Left | Right |
THD, %: | 0.0101 | 0.0103 |
THD + Noise, %: | 0.0319 | 0.0297 |
THD + Noise (A-weighted), %: | 0.0268 | 0.0260 |
Intermodulation distortion
Parameter | Left | Right |
IMD + Noise, %: | 0.0364 | 0.0362 |
IMD + Noise (A-weighted), %: | 0.0300 | 0.0298 |
Stereo crosstalk
Parameter | L <- R | L -> R |
Crosstalk at 100 Hz, dB: | -72 | -70 |
Crosstalk at 1 kHz, dB: | -76 | -74 |
Crosstalk at 10 kHz, dB: | -77 | -76 |
IMD (swept tones)
Parameter | Left | Right |
IMD + Noise at 5 kHz, %: | 0.0430 | 0.0428 |
IMD + Noise at 10 kHz, %: | 0.1153 | 0.1166 |
IMD + Noise at 15 kHz, %: | 0.1670 | 0.1664 |