Write Intensive Usage

When copying games from your Steam Library or other very large files (>10 GB), you might have noticed that write speeds on your SSD start out at full speed and then drop considerably. The underlying reason is that modern drives have caches that soak up write bursts to improve performance. In the fairly uncommon scenario of writing data that's too big to fit into these caches, the drive will have to write data directly to flash, and it will probably juggle some out of its write cache at the same time, which can result in a significant loss of write speed. Newer TLC drives operate part of their capacity in SLC mode for increased performance. This test can reveal the size of that SLC cache.

Testing on this page looks at exactly that scenario. We write a sequential stream of 1 MB blocks to the drive in a single thread, like a typical file-copy operation would do, and measure write speeds twice a second. The drive is fully erased before testing to ensure any caches are emptied. Please note that this test writes a lot of data in a very short time, which is something most consumers will never do.


While write speeds start out at an extremely impressive 2.3 GB/s and drop to around 650 MB/s after around 10 seconds, this is still a very decent result. With 25 GB, the pseudo-SLC cache, which soaks up incoming write bursts, is fairly small for a device in this performance class. Averaged write speed of 632 MB/s is good, better than most TLC-based NVMe SSDs on the market and miles ahead of recently released QLC drives. Once write activity stops and the drive is idle, the pSLC cache gets flushed to TLC in the background and full write performance is restored.