A Closer Look - Inside

To access the interior, simply loosen the thumb screws of each side panel and pull them off. There is a metal shroud with the XPG logo on it. It comes with a honeycomb vent and may hold two 120 mm fans. Looking closely, we can see the holes to mount the spacer for vertical GPU placement, which lines up with the two vertical expansion slots close to the glass panel, so with a bit of creative PCIe ribbon placement, you should be able to use the two closest to your motherboard for other expansion cards as well.


Looking at the backside of the motherboard tray, the I/O cables line up, so you won't need to worry about the cable mess being visible. On top of that, XPG has equipped all cable-routing holes with grommets, which is a nice touch and actually quite uncommon for a case of this price range. There is a plate you may easily remove to attach either two 2.5" drives or a single 3.5" unit, giving you a bit of added flexibility over two separate 2.5" trays. While the XPG Starker does come with that built-in ARGB controller, XPG opted out of a centralized PCB, so you will have quite the cable mess to deal with even with just the two included fans.


In the front, underneath the shroud, is an HDD cage you may pull out to add either two 3.5" or a 2.5 and a 3.5 " drive. Above that is the front meant to hold either fans or liquid cooling. XPG includes a single 120 mm fan without any LEDs here. While the latter is not a big deal considering the front comes with its own lighting, many mid-tower cases in this price range come with four or even five fans these days, so it would have been nice to see more fans out of the box.


In the rear, the PSU bay comes with two functional foam spacers on which the PSU will sit. Above that are the seven expansion slots and a 120 mm ARGB fan set to push hot air out the back of the XPG Starker.


In the ceiling, you can clearly see where you may mount liquid cooling, and all the space you have to do so.


All the leads within the XPG Starker are sleeved black and exactly what you would expect. As mentioned, the chassis does not come with an ARGB PCB, but you may expand your lightning elements with brand agnostic parts, which is great. These may also be controlled by the motherboard owing to the leads which plug into any major motherboard brand implementation.