Friday, August 14th 2015

TechPowerUp Builders Digest - $1700

We are bang in the middle of an inflection point where the latest generation of CPUs, GPUs, motherboards, memory, displays, and software (Windows 10) just launched. To help our readers wanting to save big on their first gaming PC builds [and because the news is slow these days], TechPowerUp brings to you its Builder's Digest series of guides, on which components we would choose, to build a gaming or media PC from the ground up, at a given price-point.

In this episode, we're trying to build the best gaming PC possible, under $1,700. Our definition of "best" includes not just performance, but also energy-efficiency and noise. $1,700 is a great budget to get building your first serious gaming PC from scratch. Your only semblance of a PC right now is probably a notebook you take to school, and so you need to buy everything that makes up a desktop. Here's how TechPowerUp will spend that money.
Processor - Intel Core i5-6600K
Always begin your budget with a good allocation for a processor. A well-chosen processor will last up to 4-5 years without bottlenecking any other parts you add down the line. Way back in 2010, we bought a $275 Core i7-950 (and a killer $140 X58-Outagamie motherboard to go with it). It's still a competent chip and still won't bottleneck today's hardware. We could have recommended a much cheaper Core i5 "Haswell" chip here, but then we're building for the future, and it helps to have the latest chip.

The Core i5-6600K is based on Intel's latest "Skylake" micro-architecture, has its highest IPC, support for DDR4 memory, and its accompanying 100-series chipset implements PCI-Express gen 3.0 bus entirely (even to the PCIe slots wired to the PCH). It's going to be the cheapest 6th generation Core processor with an unlocked base-clock multiplier, so you can overclock and keep its performance up, to cope with heavier software, as your machine gracefully ages.

The Core i5-6600K is priced at $249. We're now down to $1,451.

Motherboard - GIGABYTE Z170XP-SLI
This is one of the cheapest motherboards based on the Z170 chipset to support 2-way SLI. Boards cheaper than this usually just have one PCI-Express 3.0 x16 slot you can use for graphics, while their second x16 slots are x4, and fit for PCIe SSDs at best. At just $139, This board covers all bases -
  • 2-way multi-GPU support,
  • DDR4 memory support,
  • Modern connectivity such as USB 3.1, M.2 32 Gb/s, SATA-Express 16 Gb/s, etc.;
  • A decent 7-phase CPU VRM with heatsinks over all CPU VRM MOSFETs
  • Intel GbE LAN
  • 8-channel HD audio with ground-layer isolation, electrolytic capacitors, EMI-shielded CODEC
  • Dual-UEFI BIOS, so beginners can afford to mess up BIOS updates
For us it couldn't have been any other board at this price-point. Having spent $139, we're now down to $1,312.
Memory - Crucial CT2K8G4DFD8213 (2 x 8 GB DDR4-2133 kit)
At just $88, you can't go wrong with this kit. 16 GB is the new mainstream memory amount, which shouldn't fall short for quite a while. DDR4-2133 MHz, the JEDEC-standard frequency for Core "Skylake" chips, is plenty of memory bandwidth on paper, and in practice. Its CAS latency of 15T is acceptable for this standard, as is its 1.2V DRAM voltage.

With $88 more spent, we're down to $1,224.
Graphics Card - ZOTAC GeForce GTX 980 Ti AMP!
This is arguably the most important component in your build. It's always best to keep most of your dough on a good graphics card. For us, it's the ZOTAC GeForce GTX 980 Ti AMP! As a GPU, the GeForce GTX 980 Ti can chomp through anything at 2560 x 1440 pixels resolution, and could even play games at 4K Ultra HD (3840 x 2160), with medium-thru-high settings. ZOTAC sweetens this deal by pricing its factory-overclocked and quieter-than-reference GTX 980 Ti AMP! at $650, not a penny more than reference. It offers performance and noise levels comparable to cards priced $20-30 higher.

With $650 spent, we're down to $574.

Power Supply - SeaSonic S12II 620 Bronze
This is another killer package, priced at just $69. We reckon that 620W is sufficient power for our build. SeaSonic is a highly reputable brand, makes some of the quietest PSUs, and on this unit it offers a 5-year warranty, which we're pretty sure you'll never need.

With $69 spent, we're down to $505.
Solid State Drive - Crucial BX100 250 GB
The BX100 250 GB is the other well-rounded package from Crucial, which makes it to our build. At $84, it offers epic price-performance and price-capacity ratios. There are cheaper 250-ish GB drives, but none in the league of the BX100, in terms of performance and brand-trust. The SSD is still a critical component in your build, a broken drive takes down your stuff with it (pushing you into several hours of re-installs and backup-restores), which you can ill-afford if you're chasing a deadline. Brand-trust weighs in heavily here. The BX100 may not be as fast as the MX100 or MX200, but it comes very close.

With $84 spent, we're down to $421.

Case - Raijintek Arcadia
Choosing a case is a very subjective decision, weighing heavily on personal taste. If you like the looks of something better at the $36 we're spending on this case, go for it. We're choosing this case for what's under its panels - a no-nonsense layout with cutouts at just the right spots, a PSU bay where it should be, 2.5-inch drive bays, and enough clearance for our graphics card.

With $36 spent, we're down to $385. OMG, there's still a monitor and input devices to buy. Will we make it?
Monitor - QNIX QX2710 LED Evolution ll
It's just $299, for a 27-inch monitor that offers 2560 x 1440 pixels. You could substitute this with any of the $300-ish Korean-import 27-inchers running through western markets these days. Most markets have 1-2 year warranties mandated by the law, and the online stores selling these take returns/replacements for DOA. But will they last? Most Korean-import monitors are made from surplus display panels and logic boards made by display OEMs in South Korea and China, which didn't make it to the big brands (and not because they don't meet their QA standards). It's not as if a dimly-lit DMZ sweat-shop is making sophisticated TFT/IPS panels for you, so relax. Long-term reviews by people across the forumscape are fairly positive about these monitors. Your laws/regulations will protect your purchase, since this is NOT a gray-market deal. There's an off-grade version (with known defects) that's available as low as $209.

With $299 spent, we're down to $86.
CPU Cooler - Cooler Master Hyper TX3
At $250, the Core i5-6600K is costlier than its $243 predecessor - the i5-4670K, yet lacks a stock heatsink-fan, forcing us to buy one. At $20, the Cooler Master Hyper TX3 does the job. With a conservative fan-speed curve set in your BIOS, this cooler should be sufficient for this chip. It features a 4-pin (PWM) power input, so setting a good fan-speed curve should be a breeze.

Another $20 fly out, we're left with $66.
Input Devices - CM Storm Devastator
Well, it certainly beats non-gaming $15 keyboard-mouse combos from Microsoft or Logitech. The 2,000 dpi mouse is sufficient for most gaming types, allows both palm- and claw-grips; the keyboard is membrane-type, but offers decent tactile feedback, and is back-lit. You get this combo in three backlight colors - red, blue, and green.

The best part? It lacks the Razer Synapse herpes, which needs to ring home at each effing boot over the Internet, for your settings to take effect, until which time you're stuck with frustrating default settings. If your Internet connection isn't as reliable as the Pentagon's (tends to blackout sometimes), and you still want to fire up your rig to catch up with single-player games in Steam offline-mode, then Razer hardware will sing to you the song of its people.

We still have $37 left in our kitty.
Headset - Sharkoon Rush ER1
At $18, the Rush ER1 is the cheapest circumaural headset from a notable gaming peripheral vendor. It features a monolitic fiber-type headband, wide-bore ear cups, decent 40 mm drivers with 102 dB sensitivity, and a 2.4 m long cord that sticks into just one end of the headset.
Alternatives / Substitutes
Not gonna lie, making this list was very tough, and we turned down some very compelling options. You could pick from them depending on your brand-preferences and how much you want to squeeze your budget.

Graphics Card - Sapphire Radeon R9 Fury Tri-X
This is arguably the single best AMD Radeon graphics card on the planet, right now. At $560, you get to shave $90 off our original build, and still end up with a card that's good enough for 2560 x 1440 pixels. Since it's based on the AMD reference PCB that's shared with the R9 Fury X, you get to play the stream processor unlock soft-mod lottery. The noise levels are in the same league as NVIDIA cards. HBM memory adds "coolness" to owning it. There are just two factors that came in its way - availability (very rare), lesser future-proofing. If you can find this card in your area, and you're not a prejudiced sheep against the AMD brand, pull out a poké ball.
Graphics Card - EVGA GeForce GTX 980 Classified
It started out as an expensive $700-ish card, but can now be had for as low as $530. It's cheaper than even the Sapphire R9 Fury Tri-X, but at its given clocks, and a massive overclocking headroom thanks to its meaty VRM, it's a faster option. You get a ton of hardware and software overclocking features, and can dial down its load fan speeds considerably, while still keeping it game-worthy. This card came the closest to being our choice for the build. Trouble is, it's very rare to find the card at its new $530 price.
Monitor - Acer GN246HL
It's smaller - 24", has a lower resolution at 1080p, but a stunning 144 Hz refresh-rate. We've gamed on 144 Hz, and we can tell you that the jump from 60 Hz to 144 Hz is as much a revelation as the jump from 24-30 Hz (consoles) to 60 Hz. If you're cool with this resolution, go for it. It's also worth mentioning here that unlike our monitor choice, this $250 monitor comes from Acer, a very notable brand, with a nice warranty/replacement policy, if that makes you feel better.
Could you have built something better at our price? Post away in our comments. Next week, we'll piece together something that can game, at $800.Excludes taxes and shipping, prices sourced from Newegg.com, build covers hardware only. TechPowerUp encourages use of genuine software.
Add your own comment

56 Comments on TechPowerUp Builders Digest - $1700

#1
jboydgolfer
great story. good work.
now you just need to buy the parts , and send 'Em to me, and I'll build it and make sure they are compatible.;)
Posted on Reply
#2
64K
You didn't include the cost of that swanky left handed screwdriver but nice build. I want to do a new gaming build badly but Skylake is just not worth it for me. :(
Posted on Reply
#3
peche
Thermaltake fanboy
well ... there could be more savings choosing wisely ... but its a excellent build, !
Regards,
Posted on Reply
#4
Easy Rhino
Linux Advocate
I am looking forward to what a sub $700 build looks like.
Posted on Reply
#6
Devon68
What about the cost of the OS?
Not a bad build.
Posted on Reply
#7
64K
Devon68What about the cost of the OS?
Not a bad build.
It's in the fine print at the bottom.
Posted on Reply
#8
tabascosauz
Doc41Interesting read, having something like this from time to time would be nice :lovetpu:

and IMO motherboard is still a "subjective subject"
for around little less you can get these "while still supporting DDR4"
GIGABYTE GA-Z170-HD3
MSI Z170A PC MATE
or for 5$ more
MSI Z170 Krait Gaming
The SLI is a higher end board than all of those. HD3 is a classic low-end Gigabyte board, since Z-series chipset doesn't have a S2PV bottom feeder. The PC Mate is the lowest-end Z-series MSI board, and Krait is always a PC Mate with a different color scheme.

With a GTX 980 or Fury, I'd say avoid the bottom feeders if one wants to take advantage of Skylake's supposedly better OC over Haswell. But hey, some people like to save as much money as they can. I just hate narrow-ATX boards.
Posted on Reply
#9
btarunr
Editor & Senior Moderator
Doc41Interesting read, having something like this from time to time would be nice :lovetpu:

and IMO motherboard is still a "subjective subject"
for around little less you can get these "while still supporting DDR4"
GIGABYTE GA-Z170-HD3
MSI Z170A PC MATE
or for 5$ more
MSI Z170 Krait Gaming
Neither HD3 nor PCMate support SLI.
Posted on Reply
#10
looniam
someone forgot thermal paste. o_O
Posted on Reply
#11
Ja.KooLit
wow. i just checked here in korea. with those components calculated that cost atleast $2500 + 20-30usd shipping from store to home.

Prices here are so expensive. For example 6600k already cost 300$ here :( and zotac amp is 850$ cheapest
Posted on Reply
#12
PLAfiller
I really liked the monitor recommendations best. Since I really want a better monitor on the cheap.

Overall two things that came to my mind while reading. First, $1700 is a very serious budget. I don't know if I ever will be able to spare that kind of cash. It's almost too hard to mess something up with so much options. In EU-27 things sure look different.
Posted on Reply
#13
dorsetknob
"YOUR RMA REQUEST IS CON-REFUSED"
Devon68What about the cost of the OS?
Not a bad build.
My thoughts exactly
64KIt's in the fine print at the bottom.
and the fine print
btarunrExcludes taxes and shipping, priced sourced from Newegg.com, build covers hardware only. TechPowerUp encourages use of genuine software.
Still not a $1700 build Os is not free ( not even win 10 for this build ) Unless your going to install Linux
Posted on Reply
#14
thebluebumblebee
Do you really think it's okay to put a ~260 watt GPU with a ~100 watt CPU in a case that only has space for one 120 mm inlet fan?????????? What a POS case for a $1.700 system! BTW, I think that case is the same as the Cooler Master K350.
Drop down to a GTX 980, and get a better CPU cooler (like the 212 EVO) and case.
I've seen too many posts from people who build gaming systems in a case like this and then wonder why their temps are too high.
Posted on Reply
#15
Joss
I disagree with the rationale of this article, it should had been either a $2000/1440p build or a $1500/1080p one.
Too many compromises: cheap tower, cheap keyboard and mouse and headset, no HDD for storage, 92mm CPU cooler, dubious monitor.

Who's going to spend $650 on a GPU and $36 on a case? $249 on a CPU and $18 on headphones?
A gaming build is all about equilibrium, the parts have to match the whole.

I'm a bit disappointed, if this was a way to promote some of the articles listed (I know we all have to earn money) it could had been more intelligently presented.
Posted on Reply
#16
64K
dorsetknobMy thoughts exactly


and the fine print


Still not a $1700 build Os is not free ( not even win 10 for this build ) Unless your going to install Linux
He states clearly this is a hardware build. Other sites have done this too on hardware builds. Tom's Hardware for example. I understand your point that a copy of Windows 7 or 8.1 or 10 is necessary for a normal gaming rig but for some it doesn't matter so you can exclude it as a factor when looking at a hardware build. For example, in addition to the numerous OEM licenses that I have had on laptops and other desktops that I've owned over the years, I also have a retail copy of XP, Vista Ultimate and 7 Ultimate. I can install the retail copies on a new build without additional expense.
Posted on Reply
#17
n-ster
Make the budget $1750 and upgrade the case! This isn't even subjective, since noise is in the criteria

I'd personally put the GTX 970 in there and upgrade the case, cpu cooler, a 27" 1440p that you can buy locally, perhaps a gsync monitor as an alternative, better peripherals. I wouldn't even include a headset, spending $1700, you don't cheap out on that like that anyways.

Also if you end up doing revisions in this article with the feedback you get here, props, not many writers will take the time to listen AND actually make changes
Posted on Reply
#18
tabascosauz
n-sterMake the budget $1750 and upgrade the case! This isn't even subjective, since noise is in the criteria

I'd personally put the GTX 970 in there and upgrade the case, cpu cooler, a 27" 1440p that you can buy locally, perhaps a gsync monitor as an alternative, better peripherals. I wouldn't even include a headset, spending $1700, you don't cheap out on that like that anyways.

Also if you end up doing revisions in this article with the feedback you get here, props, not many writers will take the time to listen AND actually make changes
The case has to go, true. However, the GTX 970 would probably have been more suitable for an end of 2014 / start of 2015 build, and the Gsync monitor wouldn't be compatible with one of the alternate graphics cards.
Posted on Reply
#19
-The_Mask-
Stupid PSU choice otherwise a decent setup.
Posted on Reply
#20
thebluebumblebee
-The_Mask-Stupid PSU choice otherwise a decent setup.
Mind justifying that statement?
Posted on Reply
#21
-The_Mask-
Seasonic is not known for their silent PSU's, they're most of the time only silent till 50% and this one isn't an exception, it's loud above 50% load.

It's also a really old design (and PSU). It's a double forward design with group regulation, which means no individual voltage regulation. So not so great voltage stability, especially with cross load, that's also the reason it's not Haswell certified. Which means a realistic chance that your PC crashes when you use C6 and C7 power states. So you need to disable this in the UEFI.

Back in the day it was a good choice, but not anymore.
Posted on Reply
#22
qubit
Overclocked quantum bit
@btarunr You gonna do an unlimited budget build article - effectively the Bugatti Veyron of PCs? I think that would be epic. :cool:
Posted on Reply
#23
Jborg
qubit@btarunr You gonna do an unlimited budget build article - effectively the Bugatti Veyron of PCs? I think that would be epic. :cool:
Can you fit 4 turbochargers and 10 radiators onto a computer ?? :rolleyes:
Posted on Reply
#24
Doc41
tabascosauzThe SLI is a higher end board than all of those. HD3 is a classic low-end Gigabyte board, since Z-series chipset doesn't have a S2PV bottom feeder. The PC Mate is the lowest-end Z-series MSI board, and Krait is always a PC Mate with a different color scheme.

With a GTX 980 or Fury, I'd say avoid the bottom feeders if one wants to take advantage of Skylake's supposedly better OC over Haswell. But hey, some people like to save as much money as they can. I just hate narrow-ATX boards.
btarunrNeither HD3 nor PCMate support SLI.
like i said it is subjective and i was considering the parts already selected, after all this is a "limited budget build".... but alas I wouldn't choose any of these boards if i was going for a K processor and a GTX 980 Ti not to mention SLi.... even though the one originally selected should be just enough
Posted on Reply
#25
qubit
Overclocked quantum bit
JborgCan you fit 4 turbochargers and 10 radiators onto a computer ?? :rolleyes:
I'm sure there's a way... ;)
Posted on Reply
Add your own comment
Dec 23rd, 2024 20:27 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts