Friday, May 24th 2024

NVIDIA RTX 5090 "Blackwell" Founders Edition to Implement the "RTX 4090 Ti" Cinderblock Design

NVIDIA's upcoming GeForce RTX 5090 Founders Edition graphics card may implement a design closely resembling the cinder block product design the company readied for its RTX 4090 Ti graphics card that never materialized into a marketable product. This sees a 4-slot thick board design, with a slender main logic PCB arranged along the plane of the motherboard, on top of which the cooling solution is mounted perpendicular to the plane, as shown in the images below. This main logic board contains the GPU, memory, and VRM. There two additional PCBs—one has the display I/O, and the other has the PCIe interface. There is a fourth disaggregated component, the 12V-2x6 receptacle, located somewhere along the top of the cooling solution.

Confirmation of NVIDIA using the RTX 4090 Ti "cinder block" board design for the RTX 5090 comes from kopite7kimi, a reliable source with NVIDIA leaks. Kopite7kimi mentions a card that has a "Main Board, IO Rigid Board and a separate PCIE slot component (perhaps it should not be considered as the third PCB)," which perfectly describes with the RTX 4090 Ti. NVIDIA had completed the design phase of this card, which made it to its cooling solution OEM (which is likely where the images leaked out from). The company probably decided against launching this product because the AMD Radeon RX 7900 XTX fell significantly short of the performance proposition of the RTX 4090.
Source: kopite7kimi (Twitter)
Add your own comment

118 Comments on NVIDIA RTX 5090 "Blackwell" Founders Edition to Implement the "RTX 4090 Ti" Cinderblock Design

#1
neatfeatguy
Does Nvidia still provide the 12pin power connector that can catch on fire? That's always a nice addition to a $2K+ card.
Posted on Reply
#2
FierceRed
Just launch GPUs with a waterblock already.

Prometheus can only be assuaged with fins and air for so long.

Just looking at the 3rd & 4th pictures gave me a backache.
Posted on Reply
#3
Why_Me
LOL @ those people with those tiny little SFF builds.
Posted on Reply
#4
nguyen
I need bigger cooler so I can fit an entire PC onto my GPU
Posted on Reply
#5
oxrufiioxo
nguyenI need bigger cooler so I can fit an entire PC onto my GPU
If that's the cooler it needs there is no way this thing is costing less than 2k.... Return of the Titan :laugh:

Maybe rumors of a 512bit bus monstrosity are true.
Posted on Reply
#6
the54thvoid
Super Intoxicated Moderator
nguyenI need bigger cooler so I can fit an entire PC onto my GPU
It comes with wheels and a Jetson add-on so you can (self) drive it to work.
Posted on Reply
#7
chstamos
They should pack GPU holders with this crap.
Posted on Reply
#8
Chaitanya
Why waste the money that was already spent on engineering that cooling assembly.
Posted on Reply
#9
Evildead666
From what i can see, i count 11 heatpipes.
Holy crap !
Posted on Reply
#10
R0H1T
the54thvoidIt comes with wheels and a Jetson add-on so you can (self) drive it to work.
With full level 5 FSD or the imitation cheapskate Elon is selling you?
Why_MeLOL @ those people with those tiny little SFF builds.
Posted on Reply
#11
lepudruk
It's not a "Blackwell", it's just a "Brickwall".

No idea what chassis would handle that monster and what kind of lever you will have to use to keep it unbent.
Posted on Reply
#12
xxxsonic1971
This looks like its going to be very expensive. But cheap if you can afford it!:D
Posted on Reply
#13
nguyen
the54thvoidIt comes with wheels and a Jetson add-on so you can (self) drive it to work.
Not a bad idea :D
Posted on Reply
#14
Chomiq
Clearly matches Jensen's logic:

4 elephants = 1 GPU
Posted on Reply
#15
AusWolf
A pass-through design with some X-shaped trim? Where have I seen this before? Oh yes! On every other Nvidia card in the last 5 years.

So where's the "leak"? :laugh:
Posted on Reply
#16
TheDeeGee
neatfeatguyDoes Nvidia still provide the 12pin power connector that can catch on fire? That's always a nice addition to a $2K+ card.
There havn't been any fires, and no more further melting reports since people stopped using CableMod Adapters.
Posted on Reply
#17
AusWolf
Who wouldn't want an engineering sample like this? :D


The video is a bit old by now, but still a classic.
Posted on Reply
#18
datnoz
neatfeatguyDoes Nvidia still provide the 12pin power connector that can catch on fire? That's always a nice addition to a $2K+ card.
Well it's a nice addon.
For 2k+ you'll get a beast of a gpu and a free campfire.
Why'd you not want that.
lepudrukIt's not a "Blackwell", it's just a "Brickwall".

No idea what chassis would handle that monster and what kind of lever you will have to use to keep it unbent.
HAF 700 EVO maybe or Enthoo Pro 2 Server
Posted on Reply
#19
ratirt
4 Slot design oh boy. Motherboard makers might want to redesign their boards. Case makers might want to do the same thing or maybe something new that would fit it somewhere?
Come to think of it. It also points to what the power consumption might be more or less. It wont be little that's for sure.
Posted on Reply
#20
arni-gx
lepudrukIt's not a "Blackwell", it's just a "Brickwall".

No idea what chassis would handle that monster and what kind of lever you will have to use to keep it unbent.
dont u dare to jinx that new toys from jensen huang, dude..... ^^

any way..... its very scary, that rtx 5090 series could be so BIG like that..... its freaking me out..... but, i hope rtx 5080 series will be more slim, also not as hungry power than rtx 5090.
Posted on Reply
#21
C1ff0
Am i the only one that is perplexed how the PCB will look like? from the first photo, it seems that the pcb will be on the bottom of the card, not the classic side/behind the cooler. maybe a left angled PCIE connector? Looking at the fourth and fifth photo i see 2 big copper conductors, maybe to bring the 12v from the 12 pin connector at the top of the card to the PCB?



Purple - power rails
Orange - 4 hdmi/displayport
Green - Pcb
Red - 90° angled PCIE connector?
Posted on Reply
#24
WonkoTheSaneUK
C1ff0Am i the only one that is perplexed how the PCB will look like? from the first photo, it seems that the pcb will be on the bottom of the card, not the classic side/behind the cooler. maybe a left angled PCIE connector? Looking at the fourth and fifth photo i see 2 big copper conductors, maybe to bring the 12v from the 12 pin connector at the top of the card to the PCB?



Purple - power rails
Orange - 4 hdmi/displayport
Green - Pcb
Red - 90° angled PCIE connector?
The article mentions 3 separate PCBs - main PCB parallel with motherboard (goodbye to using any other slots!), output PCB with HDMI & DP sockets, Input PCB with PCIe slot. 12V Hpwr socket elsewhere on the heatsink.
Posted on Reply
#25
Macro Device
I'm not a huge fan of it but this GPU definitely needs one.
Posted on Reply
Add your own comment
Nov 25th, 2024 17:28 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts