Friday, June 28th 2024
LIAN LI Brings Clean Tube Routing to AIOs with HydroShift LCD Series
LIAN LI Industrial Co. Ltd., a leading manufacturer of chassis and PC accessories, launches the HydroShift LCD 360 AIOs, that allow for a nearly tubeless aesthetic once installed. There are three options available: HydroShift LCD 360S, HydroShift LCD 360R, and HydroShift LCD 360TL. Each option comes with a 2.88" LCD display at the pump block which is fully customizable via L-Connect 3.
Minimal Tubing
The HydroShift 360S, 360R, and 360TL liquid cooling AIOs have a unique design that conceals tubing to the side of the radiator, creating a clean look. The tubing is designed to sit flush against the sides using ribbed tubing commonly found in water-cooled servers, providing durability and flexibility to bend around the radiator without affecting flow. Two pre-installed retention brackets help with tubing routing, and the system includes a full-length brushed aluminum plate and left/right tube cover plates for a polished appearance. Additionally, a pump mounting hardware cover is provided for a sleek finish.
HydroShift LCD 360S
The HydroShift LCD 360S features a new pump design, now running at 3800 RPM, by enhancing the propeller and water channels, improving performance, and lowering noise levels. The pump has two main cables: one for synchronization with the motherboard using PWM and another main cable that splits into SATA, PWM for the fans, and USB 2.0 for L-Connect communication. Additionally, two tube clips are included to route the main cable along the back of the tubes. The 27 mm thick radiator comes with pre-installed 28 mm non-RGB fans that prioritize quiet operation without compromising performance, with a speed of up to 2500 RPM. Furthermore, they are compatible with the UNI FAN P28's side ARGB kit.
HydroShift LCD 360R
The 360R pump has a slightly larger propeller than the 360S, which allows it to deliver better performance at speeds of up to 3200 RPM. It features a single cable solution that combines SATA for power, PWM for fan daisy-chaining, and USB 2.0 for L-Connect communication. The HydroShift 360R also comes with two tube clips to discreetly route the main cable along the back of the tubes. Additionally, the 360R includes a 31 mm thick radiator and pre-installed 28 mm thick ARGB and PWM fans that can reach speeds of up to 2400 RPM. The ARGB cable for the radiator fans is routed inside the tube braiding to connect inside the pump block and be synchronized via L-Connect.
HydroShift LCD 360TL
The HydroShift 360TL comes with the same 3200 RPM pump and radiator as the 360R. The AIO features 3x pre-installed UNI FAN TL fans for a unique look. The cable that comes from the pump, which can also be routed behind the tubes, features the modules that connect to the daisy-chained TL fans and connection for the included TL hub, this solution provides a single cable solution with full control over the pump and fans from L-Connect 3.
Availability
The HydroShift LCD 360S, 360R, and 360TL AIOs black and white come with a 6-year warranty and are available for pre-order on June 28th, 2024, at an MSRP of $179.99, $199.99, and $259.99 respectively.
Source:
Lian Li
Minimal Tubing
The HydroShift 360S, 360R, and 360TL liquid cooling AIOs have a unique design that conceals tubing to the side of the radiator, creating a clean look. The tubing is designed to sit flush against the sides using ribbed tubing commonly found in water-cooled servers, providing durability and flexibility to bend around the radiator without affecting flow. Two pre-installed retention brackets help with tubing routing, and the system includes a full-length brushed aluminum plate and left/right tube cover plates for a polished appearance. Additionally, a pump mounting hardware cover is provided for a sleek finish.
The HydroShift LCD 360S features a new pump design, now running at 3800 RPM, by enhancing the propeller and water channels, improving performance, and lowering noise levels. The pump has two main cables: one for synchronization with the motherboard using PWM and another main cable that splits into SATA, PWM for the fans, and USB 2.0 for L-Connect communication. Additionally, two tube clips are included to route the main cable along the back of the tubes. The 27 mm thick radiator comes with pre-installed 28 mm non-RGB fans that prioritize quiet operation without compromising performance, with a speed of up to 2500 RPM. Furthermore, they are compatible with the UNI FAN P28's side ARGB kit.
HydroShift LCD 360R
The 360R pump has a slightly larger propeller than the 360S, which allows it to deliver better performance at speeds of up to 3200 RPM. It features a single cable solution that combines SATA for power, PWM for fan daisy-chaining, and USB 2.0 for L-Connect communication. The HydroShift 360R also comes with two tube clips to discreetly route the main cable along the back of the tubes. Additionally, the 360R includes a 31 mm thick radiator and pre-installed 28 mm thick ARGB and PWM fans that can reach speeds of up to 2400 RPM. The ARGB cable for the radiator fans is routed inside the tube braiding to connect inside the pump block and be synchronized via L-Connect.
HydroShift LCD 360TL
The HydroShift 360TL comes with the same 3200 RPM pump and radiator as the 360R. The AIO features 3x pre-installed UNI FAN TL fans for a unique look. The cable that comes from the pump, which can also be routed behind the tubes, features the modules that connect to the daisy-chained TL fans and connection for the included TL hub, this solution provides a single cable solution with full control over the pump and fans from L-Connect 3.
Availability
The HydroShift LCD 360S, 360R, and 360TL AIOs black and white come with a 6-year warranty and are available for pre-order on June 28th, 2024, at an MSRP of $179.99, $199.99, and $259.99 respectively.
12 Comments on LIAN LI Brings Clean Tube Routing to AIOs with HydroShift LCD Series
Edit: also prices for many of these units is creeping into custom unit range.
I can see the positive aspect of this, seeins how the tubes come out of the side of rad instead of the front, but again, somewhat restrictive IMO...
Probably not an issue in smaller cases, but just sayin...
Internals-magnifying side-panels!! :D
Edit: found this someone already tried fresnels for monitors.
www.xsimulator.net/community/threads/triple-screen-fresnel-lens-display-for-220.4274/
Why is it that to get the best pump, radiator and warranty, I have to have an AIO that looks like an iPhone is strapped to the cpu block and be force to pay for fans that don't match the rest of.my.case and I'm going to change anyway? I can't be the only one who wants this, can I?
As for the screen, the idea of on-board diagnostics isn't bad, but the extra cables and proprietary software make it a no-go for me.
Dear Lord, the cases with almost all vertical panels made of glass, screens everywhere, sometimes screens instead of case panels... And we thought it couldn't get worse than one glass panel and RGB on every component. Got to use those smartphone waste panel cuts somewhere I guess, so now we have a new trend.
"But wait, that's only 8 cables?" you say...
Each of those 8 things had a connector and a second cable forking off to a passthrough connector for daisy chaining, so you're actually trying to cable manage 16 individual cables of mismatched lengths that need to double back on themselves so you can't just pull them all taut and clip them once at either end. I made it pretty in the end but it took a lot of zip ties to get cables routed cleanly enough for the tempered glass back panel.
You either use an ARGBLED hub, which means cable spaghetti, or you're daisy-chaining things together, which means cable spaghetti. I'm pleased to say that my personal rigs have zero RGBLED and I spend the money on premium fans that are quiet and run off a single cable.
The actual coolant tubes are the cool part that you want to see. The tubes are how you can spot a watercooled rig from a long way off.You can build an AIO out of custom loop parts for less than some of these blinged-out plastic gimmicks from Lian Li, Corsair, Deepcool etc.
DDC pump/block combos exist and have a long lifespan - much better than the sealed and non-serviceable Asetek crap that gets sold for hundreds of dollars. Like an AIO, reservoirs are not essential so you basically just need the pump/block, radiator, two tubes, and four fittings.
The reason I hate these high-end AIOs so much is that 80% of their cost is bling rather than function. You can buy a 4-piece custom loop with separate pump, block, and res for the price of some of the more expensive AIOs (which still get matched or beaten in the performance charts by budget $60 AIOs using the same Asetek or CoolIt pump-block design).