This modder's other projects:
Performed Mods:
Painted the inside of the case a semi-gloss black to match the exterior. Installed a side panel window using Lowe's plexiglass. For edge trimming I used Autozone's edge trimming for cars. Dremeled out sections on the motherboard tray for better cable management. Dremeled out the front and rear stock fan grills for better airflow. Dremeled out the majority of the hard drive slots to free up unused space. Dremeled out a 92mm fan hole for an intake fan on the bottom of the case. Used Lowe's provided screws and washers to mount the hard drives in the optical bays and the radiator on the back of the case. The HD's were mounted backwards for better cable management. Installed foam on both side panels. Finally, wheels were added to give clearance for the lower fan and pump screws.
At 3.5GHz (1.47v) I've achieved a 700MHz overclock on the CPU, 200MHz overclock on the memory, 450MHz overclock on the HT Link and 450MHz overclock on the NB. My idle temps range from 30-35c and my full load temp is 45-47c. During testing yesterday it was 76F in my house so 30-35c is a fairly good idle temp IMO. I'm still testing my max 100% (Prime95 and OCCT) stable overclock, I'm hoping for 3.7 or 3.8GHz MAX. Overall I'm pretty satisfied with the water setup.
21 Comments on AMDVidia v3.0
Very nice setup, im jealous mines a bunch of tangled wires xD
A 5 is good,, that's what I feel is the amount of detail you have into it. too many scattered wires & too long of a loop, Also the fan blowing on your block looks out of place. I will score higher a pond stricter detail on your part. but in no way is this Rig a 9 or 10.
Uploaded some new pics BTW, bigger pics.
Very nice. Still want bigger pictures though.
You lost points for the 120mm over the RAM. Why not get a RAM Cooler?
Nice case though.
8/10 from me. White lights and clear H20 tubes look great together.
Looks so sleek man!
Wicked!
i would like to know where you got that water cooler from, i cant find any decent on the egg, also maybe you can try an led fan for the memory just to see how it looks.