Thermaltake, an industry leader in computer chassis, thermal solutions, and power supply units, has launched the new Riing 12 and 14 LED Radiator Fan Full Series, 120 mm and 140 mm fans fitted to enhance static pressure, producing impressive cooling performance with an optimized fan blade. Hydraulic bearings for silent operation guarantee ultra-low noise. In addition, an anti-vibration mounting system strengthens the stability during operation. The patented LED Ring maintains color and brightness uniformity. The LED ring is available in yellow, orange, red, green, blue, and white, a palette of 6 colors to style up your chassis.

Wind Blocker Frame
The wind blocker frame is designed to work with the Concentrated Compression Blade's (CCB) pressure mechanism by directing airflow towards the middle section of the blade, thereby creating a compression effect and blocking any pressure from escaping. This reduces the blade's noise and vibration, creating a perfect balance between power and sound.

EK Water Blocks, Ljubljana based premium computer liquid cooling gear manufacturer, is proud to introduce the latest addition to the company's first fully in-house engineered computer cooling fan family, the EK-Vardar. These new fans are available in either All Black or All White design and feature Extended Range (ER) of operation.

Dubbed Vardar, this family of cooling fans carry the name of a type of the cold northwesterly wind blowing from the mountains down to the valleys of Macedonia. It is a type of ravine wind, enhanced by a channelling effect while blowing down through the Moravia-Vardar gap, bringing cold conditions from the north to the Thessaloniki area of Greece. Most frequent during winter, it is blowing in the rear of a depression when atmospheric pressure over eastern Europe is higher than over the Aegean Sea.

Antec is presenting TrueQuiet 120 UFO, an extremely quiet fan for PC housings with a highly efficient level of air circulation. Nine specially shaped fan-blades prevent swirls and their unwanted noise. Due to rubberised contact points to the housing, vibrations are being dampened efficiently. Thanks to its transparent LED ring, the TrueQuiet 120 UFO can powerfully illuminate the housing in the colours blue, green, white or red. The included rubber pins furthermore enable a tool-free installation of the fan.

Finally the TrueQuiet 120 UFO is available in Europe, bringing state-of-the-art fan technology to PC systems. This new 120-mm housing fan has been developed with a strong focus on noise reduction and performs its work almost unheard. Two ventilating speeds are available via control system: 1,000 rounds per minute at 19.9 dBA or 600 rounds per minute at almost unnoticeable 8.9 dBA.

Noctua unveiled two new super-slim A-series fans at Computex 2015. These include the all-white Slim 120 mm spinner, and the Slim 200 mm. The 120 mm Slim A-series is just 15 mm thick (compared to 25 mm standard); and features an all-white frame and impeller. It features an acoustic-optimized frame, with inner surface micro-structures that serve an anti-acoustic function; and vibration-dampening pads along its frame-mount, and included rubber bolts. An SS02 bearing gives the fan six-figure-hour MTBF. The 200 mm version features all those, plus a common Noctua-brown color scheme, and a 200 mm low-noise impeller.

Sick and tired of the brown, but can't do without Noctua quality? The company announced Project Chromax, an initiative to design new products that will give users the freedom to choose their own colors on certain parts of the fan, such as frame-mounts, and rubber bolts. Currently shown off with the company's all-black IPC 120 mm spinners, Noctua unveiled silicone-based anti-vibration frame-mounts and bolts in four colors. The company didn't announce any product with these yet, but is expected to launch a few, with such accessories.

Noctua announced several major design breakthroughs in its effort to design the first fan with a fully integrated active noise-cancellation system (ANC). ANC works on the principle of destructive interference in wave mechanics. As the fan blades and motor produce noise, a microphone takes in that noise to a processor, which inverts the phase of the sound, and sends it to speakers, that give out sound that interferes destructively with the noise output of the fan, reducing its amplitude.

Noctua announced breakthroughs that include a logic board that can fit into the fan's motor-hub and needn't stay in an [ugly] plastic box hanging outside the fan; and a new standards-compliant 25 mm-thick 120 mm fan design, which will pass off as any 120 mm fan; and can be easily installed on existing systems. The company also improved the ANC system magnets that run along the bore of the frame, and is working on improving the impeller design, and the software driving the ANC system. The company successfully concluded mass-production feasibility study.

In addition to three new fan controllers, Reeven unveiled three new fans - the Euros, the ColdWing 12, and the ColdWing 14, pictured in that order. The Euros is positioned as a premium high air-flow offering. This 120 mm spinner features S-FDB bearing, which translates to an MTBF of 120,000 hours, and comes in speeds of 800, 1200, 1600, and 2000 RPM in its 3-pin variants; and 500~1200, 500~1600, and 800~2000 RPM in its 4-pin (PWM) variants.

The ColdWing 12 and ColdWing 14 are value offerings. The 120 mm ColdWing 12 features conventional sleeved bearing, with 30,000 hours MTBF. Its 3-pin variant comes in 800 RPM and 2000 RPM versions; while its 4-pin (PWM) variant offers a speed range of 300~1500 RPM. The 140 mm ColdWing 14, on the other hand, comes in 800, 1200, and 1700 RPM variants for 3-pin; and 300~1700 RPM for its 4-pin (PWM) variant. Like the ColdWing 12, it features a 30,000-hour MTBF rated sleeved bearing.

Reeven showed off three new fan controllers at Computex. These include the Four Eyes Touch (RFC-03), Six Eyes II (RFC-02), and Polariz (RFC-04), pictured below in that order. The Four Eyes Touch, as its name suggests, is a touchscreen-based controller, with four fan channels. The controller can put out up to 30W per channel, and can display fan speeds of up to 9,999 RPM. Its thermal probes can read temperatures of up to 99°C. The Six Eyes II combines a similar touchscreen interface, with physical buttons for switching channels. It can control six fan channels, with similar chops as the Four Eyes Touch. Lastly, there's the Polariz. This 3-channel controller has analog rotary knobs for each channel, with digital fan-speed and temperature readouts on tiny LED displays on each knob.

Japanese cooling expert Scythe expands the 120 mm case fan portfolio with the announcement of the new Slip Stream 120 DB axial-fans. The new line up includes five regular models with fixed fan speed as well as one PWM-enabled model. Special highlight of the series is the Dual Ball Bearing, which has been developed in Japan. Thanks to the new bearing an intense life span increase to 350.000 hours (MTBF) has been accomplished.

The successful "small hub & large fan blades" concept was initially introduced with the first Slip Stream series and is handed down to the Slip Stream 120 DB. Increased flow area and airflow could be achieved at the same fan speed, thanks to this concept. Slip Stream 120 DB lineup includes six different models, including a PWM-enabled version, which offers a wide fan speed range starting at 300 RPM and going up to 1.300 RPM.

One of ASRock's prime attractions at this year's Computex, apart from its socket LGA1151 motherboards, will be a fanless compact desktop, the BeeBox. Driven by 14 nm Intel "Braswell" Celeron N3000 series SoC, the BeeBox will pack in 2 GB or 4 GB of DDR3L-1600 memory (expandable to 8 GB using two SO-DIMM slots), 32 GB to 128 GB mSATA SSD storage, and connectivity that includes 802.11 ac WLAN, gigabit Ethernet, Bluetooth 4.0, four USB 3.0 ports (including one type-C port), and display outputs that include HDMI and DisplayPort. Measuring 110 mm x 46 mm x 118.5 mm, the BeeBox will be complete quiet, including its brick-type power supply.

EK Water Blocks, Ljubljana based premium liquid cooling gear manufacturer, is excited to introduce two new kits of EK-KIT D series performance orientated liquid cooling starter kits. EK Water Blocks has prepared two different models: EK-KIT D240 (In Win D-Frame Mini drop-in) and EK-KIT D360-X2 (CaseLabs Mercury SM8 drop-in).

These new D-series EK-KITs are designed as a perfect drop-in for either CaseLabs Mercury S8 (EK-KIT D360-X2) and In Win D-Frame Mini chassis (EK-KIT D240) as they includes all the necassery components, required to build high-performance liquid cooling system.

The Venturi Series of fans delivers high quality design and construction bringing forth a leading performance fan series with built-in rubber vibration dampening corners coupled with top quality electronics and materials. Venturi fans are ideal for high pressure or high airflow usage scenarios featuring detailed engineered elements that contribute to a low-noise yet a maximum performing solid fan.

The Venturi High Flow Series fans, HF-12 and HF-14, are optimized for low-restriction airflow environments, making them an excellent choice for computer case fans, or other low-restriction usage scenarios. Designed with a variety of performance-increasing and noise-reducing features, these fans can move an amazing amount of air compared to other fans at the same, minimal noise level.

Thermaltake, an industry leader in computer chassis, thermal solutions, and power supply units, introduces the new Riing 12 and 14 LED Radiator Fan Series, patented LED ring radiator fan fitted to enhance static pressure that produces impressive cooling performance with an optimized fan blade design. Hydraulic bearings for silent operation guarantee ultra-low noise. In addition, an anti-vibration mounting system strengthens the stability during operation.

The patented LED Ring maintains color and brightness uniformity, available in four colors: blue, red, white, and green to add style to the chassis, allowing users to not only build up an aesthetically superior liquid cooling system but also incorporate externally-modular upgrades for their chassis. The new Thermaltake Riing 12 and 14 LED Radiator Fan Series will soon be available on Newegg around the end of February.

DeepCool rolled out the GF140, a 140 mm fan, with a design focus on low-noise. Featuring an octagonal frame, with silicone inserts on its edges, and included silicone bolts, the fan offers a fluid-dynamic bearing (FDB) motor, and a detachable impeller that lets you clean it better. With a 4-pin PWM input, the fan spins between 700 and 1,200 RPM, pushing up to 71.8 CFM of air, with noise output ranging between 17.6 and 26.7 dBA. DeepCool didn't announce pricing or availability.

Cooler Master, a leading creator, innovator, and manufacturer of desktop components and peripherals, today announced the Silencio FP Series, featuring brand new fans with Cooler Master's latest pressure optimized silent performance fan technology.

The Silencio FP Series brings in some new 120mm fan models to the Cooler Master lineup, all focused on quiet performance. These fans utilize Cooler Master's newest fan technology to bring quality airflow at extremely low noise levels. The Silencio FP Series use Loop Dynamic Bearing technology to push life expectancy up to an outstanding 160,000 hours. Next to that an all new patented driver IC on the fans provides both less vibrations to reduce noise and uses ultra-low current to save on power consumption. The driver is also more precise, providing more accurate RPM feedback for better fan management. The SmartFan engine backs up the driver with a low starting voltage and polarity proofing for less headaches when hooking up. The Silencio FP fans also come with protections against fan jams and an auto-resume function after any blade obstructions are cleared to help protect the blades and motor.

CRYORIG, innovator of PC thermal solutions is releasing it's new QF120 line of 120 mm PWM system fans. The new QF120 line features CRYORIG's proprietary Quad Air Inlet system. Four strategically placed air intakes line up the corners of the QF120 fan frame, allowing the static pressure optimized fan blades take in extra air from the sides of the fan frame increasing overall air output. HPLN High Precision Low Noise bearing from the XF140 line makes a return in the QF120 Series for low noise performance. The fans will cover a wide RPM spectrum with PWM control, allowing users to fine tune it to their liking individually. Integrated rubber Vibration Absorbers also come preinstalled to absorb excess vibration.

The QF120 will initially be released in three different models, QF120 Silent, QF120 Balanced and QF120 Performance. The QF120 Balanced features a moderate fan speed range from 330 to 1,600 RPM in order to offer good balance between performance, RPM and noise. The range is low enough for low noise use, and powerful enough for high load computing. The QF120 Silent features ultra low RPM speeds of 200 to 1.000 RPM with the minimum noise level of 5 dBA, virtually inaudible inside a PC chassis, while still pushing good airflow. The perfect solution for those who need near silence but still want their system cool and stable.

Right before for Christmas Thermalright presents two new CPU coolers, which have been designed especially for fans of compact Mini-ITX or Micro-ATX systems: The Macho 90 and the Silver Arrow ITX.

The Macho 90 is the newest member of our highly successful Macho Family and rounds off the series. The layout is tailored to fit the typical limitations encountered when dealing with small sized Mini-ITX motherboards. The height of just 135 mm allows the installation of the cooler in various compact PC cases. In order to avoid incompatibilities to RAM modules or motherboard components as much as possible, the nearly square heatsink has been placed directly above the CPU-socket.

EK Water Blocks, Ljubljana based premium computer liquid cooling gear manufacturer, is proud to announce company's first fully in-house engineered computer cooling fan, designed and built primarily for highest-performance computer liquid cooling systems - the EK-Vardar. This product is the result of one year worth of development, CFD analysis, careful motor selection and anechoic chamber testing.

Dubbed Vardar, this family of cooling fans carry the name of a type of the cold northwesterly wind blowing from the mountains down to the valleys of Macedonia. It is a type of ravine wind, enhanced by a channelling effect while blowing down through the Moravia-Vardar gap, bringing cold conditions from the north to the Thessaloniki area of Greece. Most frequent during winter, it is blowing in the rear of a depression when atmospheric pressure over eastern Europe is higher than over the Aegean Sea.

Phanteks, the award winning designer of the Enthoo Primo, today announced the immediate availability of the PH-F120MP and PHF140MP Series High Static Pressure fans. The new MP Series fans are designed specifically for radiators. They have the ability to overcome the airflow restriction caused by high fin density from radiators. They will be available in 120mm and 140mm sizes.

The MP Series High Static Pressure fans are equipped with a new seven blade design that can produces high static air pressure allowing for a direct and focused airflow making them ideal for the densely packed fins of a radiator. The MP Series fans delivers an outstandingly low vibration, noise and turbulence with the eight preinstalled acoustic dampers.

Thermaltake, being an industry leader in computer chassis, thermal solutions, and power supply units, now unfolds full range of Luna Series case fan in 120mm, 140mm, and 200mm sizes with various LED lighting options. Particularly, as the new stunning focus for Thermaltake PC case fans in 2014, Luna LED series is an all around case fan, providing an effective radiator, heatsink, and case cooling solution inside the chassis. With an anti-vibration mounting system covered all four corners, it strengthens the stability during operation. Balanced seven, nine, and eleven-blade fan design ensures optimal airflow, undoubtedly guarantees ultra low noise and heat dissipation. Luna Series releases three LED colors selection: red, white and blue, to add style to your PC case.

Noctua today introduced several new additions to its popular A-series of premium quality quiet fans. While the new NF-A9 and NF-A8 models succeed the award-winning NF-B9 and NF-R8, the NF-A4x10 5V is a dedicated 5V version of the renowned NF-A4x10. All models feature Noctua's proprietary AAO (Advanced Acoustic Optimisation) frames as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels and come with full 6 years manufacturers warranty.

"The NF-R8 and NF-B9 have become well established references in the field of quiet 80 and 92mm fans and it took us almost 3 years of development to achieve consistently better efficiency", explains Mag. Roland Mossig (Noctua CEO). "We're very happy with how the NF-A8 and NF-A9 turned out in the end, they really push the limits in their fields." Featuring all of Noctua's latest technologies such as Stepped Inlet Design, Inner Surface Microstructures and Flow Acceleration Channels, the NF-A9 and NF-A8 provide higher static pressure and an even better airflow/noise ratio than their much acclaimed predecessors, which will continue to be available via Noctua's redux line.

DEEPCOOL, one of the leading manufacturers of desktop CPU cooler, DC case fan and Notebook cooler will launch a new high-end case fan under its sub-brand - GAMER STORM GF series after launching the GF140

GF120 is an ultra high-end case fan to GF series, which applied by DEEPCOOL Maelstrom 120/240 and all Captain series. Multiple features of FDB bearing, patented design 100% De-Vibration TPE cover, Optimized Airflow with Centralized Flow Pattern, PWM function offers different needs of silence and cooling. Triple-Proof Design (Dustproof, Waterproof, Oil-leakage proof) ensures cleaner, safer, longer lifespan. Detachable fan with colorful fan blade satisfy your DIY enthusiasm and offers various customizations to match your case components. GF120 has what your need for case fan: silent, long lifespan, effective cooling.

Being a high performance fan manufacturer, Enermax proudly launches its TwisterStorm, a follow-up to its high air pressure fan, TwisterPressure. TwisterStorm achieves 3500rpm industrial grade performance. With Enermax's advanced patented Twister Bearing technology, TwisterStorm is the world's leading non-ball-bearing structure high speed fan. TwisterStorm has a Shift Speed Control for three different speeds: 1500/2500/3500, allowing users to adjust the setting based on their needs.

Spire continues to expand their range of PC accessories, proudly introducing the DustGuard series. The DustGuard series dust filters are universal dust filters and fan guard combinations, available in various sizes, such as 80, 90 and 120 mm.

The DustGuard can be installed on any same size DC fan or free fan space in your PC chassis. The DustGuard can be opened to remove the filter, thus making it possible to rinse the filter in water. The cover design is made so that it provides a durable solutions while not blocking to much airflow. As always, quality is guaranteed by our 2 year warranty and service program.

Two years ago, LEPA has successfully introduced the first fan series. With the unique LED effects of the Casino and Chopper models, the manufacturer has quickly won the hearts of gamers and hardware enthusiasts. In the meantime, the LEPA engineers worked on new products and technological advancements to boost up the cooling performance of the fans. As a result, the company now presents the BOL.Quiet series with three new 12cm models. They are now available for sale in Europe.

The patented BOL Bearing from LEPA
All LEPA fans are based on a patented bearing technology. In comparison with usual ball bearing fans, LEPA's "Barometric Oilless Bearing" (BOL) ensures a smoother and quieter rotation. Furthermore, the BOL fans are designed for an extraordinary long lifetime of 160,000 hours MTBF! To reach such high performance capability, LEPA applies a self-lubricating sleeve made from a high-tech nano material as well as a magnet which connects the rotor with the base. That way, the manufacturer minimizes the contact area and can avoid annoying rattling or grinding noises.