NVIDIA made the product page of the GeForce RTX 3060 graphics card active on its website. The card is shown starting at USD $329, and NVIDIA confirmed some basic specs. The RTX 3060 is endowed with 3,584 CUDA cores, and comes with GPU frequency of 1.32 GHz, and maximum GPU Boost frequency of 1.78 GHz. It is confirmed to feature 12 GB of GDDR6 memory across a 192-bit wide memory interface. The card's typical board power is confirmed to be 170 W, with the reference card making do with a single 8-pin PCIe power connector. The RTX 3060 should be available from February 25.

NVIDIA is slated to launch its performance-segment GeForce RTX 3060 "Ampere" graphics card on February 25, 2021, according to a WCCFTech report. The company launches the card at an MSRP (starting price) of USD $329. 12 GB is the standard memory size for the RTX 3060. The card marks the debut of the new 8 nm "GA106" silicon, NVIDIA's 4th chip based on the GeForce "Ampere" graphics architecture.

While the "GA106" silicon features up to 3,840 CUDA cores across 30 streaming multiprocessors, the RTX 3060 is reportedly being carved out by enabling 28 SM, working out to 3,584 CUDA cores. It features 12 GB of 15 Gbps GDDR6 memory across a 192-bit wide memory interface, which means 360 GB/s memory bandwidth, slightly higher than the 336 GB/s of the RTX 2060. The card has a typical board power rating of 170 W, which means plenty of custom-design graphics card models should come with single 8-pin PCIe power connector configurations. NVIDIA's design goal for the RTX 3060 could be doubling performance over the GTX 1060 "Pascal," and a significant performance uplift over the RTX 2060.

AMD is slowly preparing to launch its next-generation of mid-range graphics cards based on the RDNA 2 architecture. Following the launch of Navi 21 GPU SKUs, next in line comes the slower Navi 22 variant with fewer compute units (CU). Envisioned to compete against NVIDIA's GA104 and GA106 GPU SKUs, the Navi 22 based GPU is targeting 1440p gamers mainly. Today, thanks to Andreas Schilling from the German website HardwareLuxx, we got a few pieces of information regarding AMD's upcoming Radeon RX 6700 XT graphics card. The source is claiming that we are getting this card sometime in the first half of this year, with the possibility to get it in Q1.

The AMD Radeon RX 6700 XT graphics card is designed for 1440p gaming as mentioned, and its VRAM configuration is interesting. It features 12 GB of GDDR6 memory, which is more than enough for the types of workloads this card is meant for. The memory communicates using 192-bit bus. The Navi 22 GPU is configured for 40 CUs in total, with 2560 cores maximum. The Radeon RX 6700 XT features the Navi 22 XT variant with the fully enabled die, while its smaller brother Radeon RX 6700 is featuring Navi 22 XL die that has possibly fewer CUs and smaller TDP. The pricing of the upcoming cards is unknown.

The "GA106" will be NVIDIA's third GeForce "Ampere" silicon, following the "GA102" and "GA104." It will power several mid-range GeForce RTX 30-series graphics cards, including the recently announced GeForce RTX 3060. VideoCardz scored the first picture of the "GA106" ASIC. The chip is estimated to have a die-are of 272 mm², while its package (fiberglass substrate) is of the same size as the "GA104," possibly even with some degree of pin-compatibility.

Built on the 8 nm silicon fabrication process, the "GA106" physically features 3,840 "Ampere" CUDA cores, 120 3rd Gen Tensor cores, and 30 2nd Gen RT cores. Its memory bus width is unknown, but on the RTX 3060, it features a 192-bit wide interface, holding 12 GB of memory, using 16 Gbit GDDR6 memory chips. Besides the RTX 3060, NVIDIA is expected to carve out other SKUs, such as the RTX 3050 Ti and RTX 3050, out of this silicon. The "GA106" could also be prominently featured in upcoming RTX 30-series Mobile SKUs.

The prices of graphics cards have been perhaps the most controversial topic among PC enthusiasts lately. High demand and low supply of the latest generation GPUs have lead to the massive price increase over MSRP. Graphics card makers, AMD and NVIDIA, have already announced that this situation is not going to get better until March ends. However, there seems to be another possible issue appearing slowly on the horizon. According to the Chinese website MyDrivers, the prices of graphics cards are expected to increase thanks to the increasing prices of memory used in them, presumably including both the slower GDDR6 and the faster GDDR6X memory.

The source claims that the new memory price increase is going to take place after February 12th, when Chinese New Year ends. As both the NVIDIA GeForce RTX 3000 series Ampere generation and AMD Radeon 6000 series generation use GDDR6X and GDDR6 respectively, that means that the increased prices of these memory types could increase the MSRP, which is already above its original intent.

PC enthusiast VIK-on pulled off a sophisticated memory mod for the GeForce RTX 2070, doubling its memory amount to 16 GB. In a detailed video presentation (linked below), VIK-on demonstrated how he carefully removed the 8 Gb Micron-made GDDR6 memory chips of his card, with 16 Gb Samsung-made chips he bought off AliExpress for $200. Memory replacement mods are extremely difficult to pull off, as you first de-solder the existing chips using a hot air gun while keeping the contacts on the PCB intact (ensuring no pins short); and solder the replacement BGA memory chips in place.

In addition, a set of "jumpers" on the PCB need to be modified to make it recognize the Samsung memory. The resulting card booted to desktop successfully, with GPU-Z reading its full 16 GB memory size. The card successfully made it through 3DMark TimeSpy, albeit with 30% lower performance than a normal RTX 2070 (6176 points vs. ~9107 points). The card would also crash Furmark. Still, it's mighty impressive that the "TU106" recognizes 16 GB of addressable memory (which means all its memory channels are intact), without the need for any BIOS mods, which is impossible to pull off.Watch the VIK-on video presentation here.

Colorful today has added two new graphics cards to its staple of NVIDIA RTX 3060 Ti models, the iGame GeForce RTX 3060 Ti Ultra White OC and iGame GeForce RTX 3060 Ti Advanced OC. Both of them feature a triple fan cooling solution (2x 90 mm and 1x 80 mm central fan), and feature a "one click overclock" function that's manifested in a I/O panel button. Both are equally equipped with 8 GB of 14 Gbps GDDR6 memory, and both feature an I/O configuration set at 3x DisplayPort and 1x HDMI 2.0. Both also feature a 2x 8-pin power delivery subsystem.

The iGame GeForce RTX 3060 Ti Ultra White OC features a white cover and backplate (as the name implies), although there are some colored graphics in the shroud, which prevent it from being used in minimalist builds. The card features a base clock of 1,410 MHz, a Boost clock of 1,665 MHz (with the One-Key Overclock function driving it up to 1,770 MHz). The external dimensions are 315 mm length, 131.5 mm width, and 56 mm thickness. As for the iGame GeForce RTX 3060 Ti Advanced OC, it keeps all the clocks of the Ultra White OC except for the One-Key Overclock function, which drives it 30 MHz higher up to 1,800 MHz. External dimensions are 315.5 mm length, 131 mm width, and 53 mm thickness.

ASUS has been super hyped-up about the popular Japanese military science fiction media franchise/media mix called GUNDAM, where the company has developed multiple products based on the series. Starting with the all-white GUNDAM GeForce RTX 3090 graphics cards to the latest edition of ASUS TUF Gaming X3 GeForce GTX 1660 SUPER ZAKU II EDITION graphics card, ASUS seems to be loving the fiction universe of GUNDAM. The latest GTX 1660 SUPER graphics card is a factory overclocked design with a slight improvement to the boost speed. The GPU will boost up to 1830 MHz, representing a mere 2.5% improvement. The rest of the specifications match the reference GTX 1660 SUPER design with 1408 CUDA cores and 6 GB of GDDR6 14 Gbps memory.

However, the main appealing and marketing thing about this card is not its overclocking speeds, but rather its aesthetics. It features Char's MS-06S ZAKU II Mobile Suit color scheme, which is a red colorway. It comes in a 2.7 slot body with a triple-fan cooling system, and a special red backplate with some stylish character animation.

It seems that Mini-ITX lovers will finally be able to get their due Ampere injection to their HPC or small form factor systems. MSI, Palit and Gainward have announced Mini-ITX versions of NVIDIA's RTX 3060 graphics card, enabling higher performance (especially in RTX workloads) than last generation's mainstream RTX 2060 graphics cards. MSI's Aero ITX will be available in base and OC variants, and there's currently no confirmation on how many power connectors are built into those cards (though a standard 8-pin would suffice).

Sapphire released the GPRO X070 compute graphics card. This is very much a graphics card, in that it has display outputs, and is based on the AMD Radeon RX 5700 XT, but there's a twist—it's completely fanless. The card has a large triple-slot heatsink cooling the GPU, which is designed to rely on external airflow in rackmount cases, and probably won't work on its own in a tower case. Sapphire says its applications include render farms, or V-GPUs. The card features an AMD Radeon RX 5700 XT that runs at reference clock speeds—1905 MHz max boost, 14 Gbps GDDR6 memory. There's also an "Efficiency Mode" enabled through a secondary BIOS, which runs the GPU at 1750 MHz boost, possibly making the card best suited for crypto-currency mining operations.

Intel has today quietly launched its newest generation of Next Unit of Computing (NUC) devices with some nice upgrades over the prior generation. Codenamed the "Phantom Canyon", the latest NUC generation brings a major improvement for the "enthusiast" crowd, meant mostly at gamers who would like to use a small form-factor machine and have decent framerates. This is where the Enthusiast NUC 11 comes in. With its 28 Watt Intel Core i7-1165G7 Tiger Lake CPU, which features four cores and eight threads clocked at the maximum of 4.70 GHz, this Enthusiast NUC 11 mini-PC is rocking the latest technologies inside it.

To pair with the CPU, Intel has decided to put a discrete GPU, besides the Integrated Xe model, to power the frames needed. The dGPU in question is NVIDIA's GeForce RTX 2060 model with 6 GB of GDDR6 VRAM, based on the last generation "Turing" architecture. For I/O, Intel has equipped these machines with quite a lot of ports. There is Intel AX201 Wi-Fi 6 plus Bluetooth 5 module, a quad-mic array with beam-forming, far-field capabilities, and support for Alexa. There is a 2.5 Gb Ethernet port, along with two Thunderbolt 4.0 ports for internet connectivity and other purposes (TB ports support fast charging). When it comes to display output, the Enthusiast NUC 11 has HDMI 2.0b and a mini DisplayPort 1.4 port. You can run four monitors in total when using the Thunderbolt ports. On the front side, there is also an SD card reader, and the PC has six USB 3.1 Gen2 ports in total. You can find out more about the Enthusiast NUC 11 mini-PCs here.

The EVGA GeForce RTX 3060 12 GB provides players with the ability to vanquish 1080p and 1440p gaming, while providing a quality NVIDIA RTX experience and a myriad of productivity benefits. The card is powered by NVIDIA Ampere architecture, which doubles down on raytracing and AI performance with enhanced RT cores, Tensor Cores, and new streaming multiprocessors. With 12 GB of GDDR6 memory, high-end performance does not have to be sacrificed to find a card for gaming and everyday use.

Combined with the next generation of design, cooling, and overclocking utilizing EVGA Precision X1, the EVGA GeForce RTX 3060 12 GB Series redefines what it means to be built for gaming and productivity. With its efficient, high-performance architecture and the second generation of NVIDIA RTX, the GeForce RTX 3060 brings amazing hardware raytracing capabilities and support for NVIDIA DLSS and other technologies.

AMD may be finding itself riding a new wave of success caused by its accomplishments with the Zen architecture, which in turn bolstered its available R&D for its graphics division and thus turned the entire AMD business on its head. However, success comes at a cost, particularly when you don't own your own fabs and have to vie for capacity with TSMC against its cadre of other clients. I imagine that currently, AMD's HQ has a direct system of levers and pulleys that manage its chip allocation with TSMC: pull this lever and increase number of 7 nm SOC for the next-generation consoles; another controls Ryzen 5000 series; and so on and so on. As we know, production capacity on TSMC's 7 nm is through the roof, and AMD is finding it hard to ship enough of its Zen 3 CPUs and RDNA2 graphics cards. The reported delay for the AMD RX 6700 series may well be a result of AMD overextending its product portfolio on the 7 nm process with foundry partner TSMC.

A report coming from Cowcotland now points towards a 1Q2021 release for AMD's high-performance RX 6700 series, which was initially poised to see the light of day in the current month of January. The RX 6700 series will ship with AMD's Navi 22 chip, which is estimated to be half of the full Navi 21 chip (which puts it at a top configuration of 2560 Stream Processors over 40 CUs). These cards are expected to ship with 12 GB of GDDR6 memory over a 192-bit memory bus. However, it seems that AMD may have delayed the launch for these graphics cards. One can imagine that this move from AMD happens so as to not further dilute the TSMC wafers coming out of the factory, limited as they are, between yet another chip. One which will undoubtedly have lower margins than the company's Zen 3 CPUs, EPYC CPUs, RX 6800 and RX 6900, and that doesn't have the same level of impact on its business relations as console-bound SoCs. Besides, it likely serves AMD best to put out enough of its currently-launched products' to sate demand (RX 6000 series, Ryzen 5000, cof cof) than to launch yet another product with likely too limited availability in relation to the existing demand.

Intel's return to discrete gaming GPUs may have had a modest beginning with the Iris Xe MAX, but the company is looking to take a real stab at the gaming market. Driver code from the latest 100.9126 graphics driver, and OEM data-sheets pieced together by VideoCardz, reveal that its next attempt will be substantially bigger. Called "DG2," and based on the Xe-HPG graphics architecture, a derivative of Xe targeting gaming graphics, the new GPU allegedly features 512 Xe execution units. To put this number into perspective, the Iris Xe MAX features 96, as does the Iris Xe iGPU found in Intel's "Tiger Lake" mobile processors. The upcoming 11th Gen Core "Rocket Lake-S" is rumored to have a Xe-based iGPU with 48. Subject to comparable clock speeds, this alone amounts to a roughly 5x compute power uplift over DG1, 10x over the "Rocket Lake-S" iGPU. 512 EUs convert to 4,096 programmable shaders.

A leaked OEM data-sheet referencing the DG2 also mentions a rather contemporary video memory setup, with 8 GB of GDDR6 memory. While the Iris Xe MAX is built on Intel's homebrew 10 nm SuperFin node, Intel announced that its Xe-HPG chips will use third-party foundries. With these specs, Intel potentially has a GPU to target competitive e-sports gaming (where the money is). Sponsorship of major e-sports clans could help with the popularity of Intel Graphics. With enough beans on the pole, Intel could finally invest in scaling up the architecture to even higher client graphics market segments. As for availability, VideoCardz predicts a launch roughly coinciding with that of Intel's "Tiger Lake-H" mobile processor series, possibly slated for mid-2021.

With the desktop GeForce RTX 3080 being based on the "big" GeForce Ampere silicon, the "GA102," we wondered how NVIDIA would go about designing the RTX 3080 Mobile. It turns out that the company will max out the smaller "GA104" silicon on which the desktop RTX 3070 and RTX 3060 Ti, are based. An unreleased ASUS ROG Zephyrus Duo (GX551QS) gaming notebook's Geekbench online database entry reveals the name-string and streaming multiprocessor (SM) count of the RTX 3080 Mobile.

The Geekbench online database entry lists out the OpenCL device (GPU) name-string as "GeForce RTX 3080 Laptop GPU," and OpenCL compute unit (SM) count as 48. This corresponds with the maximum SM count of the "GA104," which features 6,144 Ampere CUDA cores spread across 24 TPCs (48 SM), 48 2nd generation RT cores, 192 3rd generation Tensor cores, 192 TMUs, and 96 ROPs. The Geekbench entry also reveals the video memory amount as 16 GB, maxing out the 256-bit wide GDDR6 memory interface of the "GA104," likely using 16 Gbit memory chips.

According to kopite7kimi, a famous leaker of information about NVIDIA graphics cards, we have some pieces of data about NVIDIA's plans to bring back its SUPER series of graphics cards. The SUPER graphics cards have first appeared in the GeForce RTX 2000 series "Turing" GPUs with GeForce RTX 2080 SUPER and RTX 2070 SUPER designs, after which RTX 2060 followed. Thanks to the source, we have information that NVIDIA plans to give its newest "Ampere" 3000 series of GeForce RTX GPUs a SUPER overhaul. Specifically, the company allegedly plans to introduce GeForce RTX 3070 SUPER and RTX 3080 SUPER SKUs to its offerings.

While there is no concrete information about the possible specifications of these cards, we can speculate that just like the previous SUPER upgrade, new cards would receive an upgrade in CUDA core count, and possibly a memory improvement. The last time a SUPER upgrade happened, NVIDIA just added more cores to the GPU and overclocked the GDDR6 memory and thus increased the memory bandwidth. We have to wait and see how the company plans to position these alleged cards and if we get them at all, so take this information with a grain of salt.This is only a mock-up image and is not representing a real product.

Lenovo may have inadvertently disclosed the existence of several upcoming GeForce RTX 30-series graphics cards. The Product Specifications Reference (PSREF) document for a certain Lenovo pre-built gaming desktop model, the Legion R5 28IMB05, lists out all its possible hardware options, covering CPU, graphics cards, and storage. The CPU options cover 10th Gen Core "Comet Lake-S" models that are already out; but things get interesting with the list of graphics options. In addition to certain RTX 20-series, and GTX 16-series SKUs, the list mentions certain RTX 30-series SKUs that haven't yet been announced by NVIDIA.

Among these unreleased GPUs are the GeForce RTX 3050, which is shown featuring 4 GB of GDDR6 memory; the GeForce RTX 3050 Ti with 6 GB of it; and the GeForce RTX 3060 (non-Ti) with 12 GB of it. The already-launched RTX 3070 also finds mention here. It's likely that these are OEM-exclusive SKUs, but if they're not, then we have our first look at how NVIDIA is handling product segmentation between the RTX 3050 Ti and the RTX 3060 (non-Ti), in a possible bid to avoid a repeat of the GTX 1060 3 GB vs. 6 GB confusion (where besides memory, the two SKUs also had different core-configurations). Based on the GA106 silicon, the GeForce RTX 3060 (non-Ti) is expected to feature a 192-bit wide GDDR6 memory interface, which it populates with 12 GB of memory.

ASUS on its support website has inadvertently confirmed some of the rumors and speculations of recent months - ever since the official release of AMD's RX 6000-series, really. Not to be outdone by AMD, NVIDIA apparently sees the need to fill the gap between its RTX 3080 10 GB graphics card at a virtual $699 and its top-of-the-line RTX 3090 graphics card at #$1,499 - better to compete with the RX 6900 at (an also virtual) $999. Thus ASUS listed a ROG-STRIX-RTX3080TI-O20G-GAMING and a ROG-STRIX-RTX3080TI-20G-GAMING, alongside some... interesting ROG-STRIX-RTX3060-O12G-GAMING and ROG-STRIX-RTX3060-12G-GAMING.

Thus it is seemingly confirmed that NVIDIA dropped official plans to offer the RTX 3080 in 20 GB GDDR6X flavor, and is instead packing its RTX 3080 Ti with that amount of graphics memory - that should serve to make the model even more attractive to users who were still trying to get an RTX 3080 series, as the drama surrounding that cards' 10 GB of VRAM is well-known across the tech industry and consumers. However, the RTX 3060 being listed in a 12 GB GDDR6 version (with a certain 6 GB version being on its way as well) really is puzzling; that graphics card, which is expected to pack only 3840 CUDA cores in its GA106 chip, will run out of shading and RT power long before that VRAM pool is exhausted. NVIDIA's chip structure is becoming ever more confusing in this 30-series, at least. The announcement for the new graphics cards is expected to take place come January 12th.

ASUS today rolled out the GeForce RTX 3070 Turbo graphics card. Given that the company built lateral-airflow coolers for even the 350 W RTX 3090, such a card based on the RTX 3070 should come as little surprise. ASUS designs these cards for cases with airflow restrictions. The card is strictly 2 slots thick and full-height. It uses a lateral blower-type cooling solution that uses a vapor-chamber plate and a copper channel-type heatsink; and a lateral fan that uses double-ball bearing. The card draws power from a pair of 8-pin PCIe power connectors located along the tail end, rather than on the top. The card sticks to NVIDIA-reference clock speeds of up to 1725 MHz GPU Boost, and 14 Gbps (GDDR6-effective) memory; although a software-activated "OC Mode" can run it up to 1755 MHz. Display outputs include three DisplayPort 1.4a, and one HDMI 2.1 connectors. The company didn't reveal pricing or availability information.

NVIDIA today announced their RTX A6000 series of graphics cards, meant to perform as graphics accelerators for professional workloads. And the announcement marks a big departure for the company's marketing, as the Quadro moniker has apparently been dropped. The RTX A6000 includes all raytracing resources also present on consumer RTX graphics cards, and marks a product segmentation from the company's datacenter-geared A40. The RTXA6000 features a full-blown GA102 chip - meaning 10752 CUDA cores powering single-precision compute performance of up to 38.7 TFLOPs (3.1 TLFOPs higher than that of the GeForce RTX 3090). Besides offering NVIDIA's professional driver support and features, the RTX A6000 features 48 GB of GDDR6 (note the absence of the X) memory - ensuring everything and the kitchen sink can be stored in the cards' VRAM. GDDR6X doesn't currently offer the per-chip density of GDDR6 solution, hence why NVIDIA opted for the lower-performing, yet denser memory variant.

The RTX A6000 features a classic blower-type cooler, and presents a new low-profile NVLink bridge that enables two of them to work in tandem within the same system. NVIDIA vGPU virtualization technologies are supported as well; display outputs are taken care of by 4x DisplayPort connectors, marking the absence of HDMI solutions. The card is currently listed for preorder at a cool and collected $5,500, but with insufficient silicon to offer even to its highest-margin datacenter customers, it remains to be seen exactly how available these will be in the market.

The DRAM market exhibits a healthier and more balanced supply/demand relationship compared with the NAND Flash market because of its oligopolistic structure, according to TrendForce's latest investigations. The percentage distribution of DRAM supply bits by application currently shows that PC DRAM accounts for 13%, server DRAM 34%, mobile DRAM 40%, graphics DRAM 5%, and consumer DRAM (or specialty DRAM) 8%. Looking ahead to 1Q21, the DRAM market by then will have gone through an inventory adjustment period of slightly more than two quarters. Memory buyers will also be more willing to stock up because they want to reduce the risk of future price hikes. Therefore, DRAM prices on the whole will be constrained from falling further. The overall ASP of DRAM products is now forecasted to stay generally flat or slightly up for 1Q21.

AMD has launched its RDNA 2 based graphics cards, codenamed Navi 21. These GPUs are set to compete with NVIDIA's Ampere offerings, with the lineup covering the Radeon RX 6800, RX 6800 XT, and RX 6900 XT graphics cards. Until now, we have had reviews of the former two, but not the Radeon RX 6900 XT. That is because the card is coming at a later date, specifically on December 8th, in just a few days. As a reminder, the Radeon RX 6900 XT GPU is a Navi 21 XTX model with 80 Compute Units that give a total of 5120 Stream Processors. The graphics card uses a 256-bit bus that connects the GPU with 128 MB of its Infinity Cache to 16 GB of GDDR6 memory. When it comes to frequencies, it has a base clock of 1825 MHz, with a boost speed of 2250 MHz.

Today, in a GeekBench 5 submission, we get to see the first benchmarks of AMD's top-end Radeon RX 6900 XT graphics card. Running an OpenCL test suite, the card was paired with AMD's Ryzen 9 5950X 16C/32T CPU. The card managed to pass the OpenCL test benchmarks with a score of 169779 points. That makes the card 12% faster than RX 6800 XT GPU, but still slower than the competing NVIDIA GeForce RTX 3080 GPU, which scores 177724 points. However, we need to wait for a few more benchmarks to appear to jump to any conclusions, including the TechPowerUp review, which is expected to arrive once NDA lifts. Below, you can compare the score to other GPUs in the GeekBench 5 OpenCL database.

TUL Corporation, a leading and innovative manufacturer of AMD graphic cards since 1997, today is announcing its new PowerColor Fighter RX 6800 based on AMD's latest RDNA2 architecture and with 16 GB of GDDR6, offering solid 4K gaming performance for the most price conscious gamers. Powered by AMD RDNA 2 architecture, PowerColor Fighter RX 6800 graphics card features 60 Compute Units, 128 MB of all new AMD Infinity Cache and 16 GB of dedicated GDDR6 memory, is engineered to deliver ultra-high frame rates and serious 4K resolution gaming.

PowerColor Fighter RX 6800 graphics card is designed for gamers on a budget but with powerful gaming performance in mind. Fighter RX 6800 is paired with effective triple cooling fan design, Mute Fan Technology, BIOS switch button, and reinforced back plate, so the Fighter can fight with you to enjoy exceptional gaming experiences.

GIGABYTE TECHNOLOGY Co. Ltd, a leading manufacturer of motherboards, graphics cards, and hardware solutions, today announces the latest BIOS update on AMD X570、B550 and A520 motherboards for the features of AMD Smart Access Memory and Rage mode. These innovative features enabling a bandwidth boost when the CPU accesses the GPU memory on graphics cards, which enhances and unleashes the ultimate system performance. Now, users with an "AMD Yes" platform on GIGABYTE AMD 500 series motherboards with AMD Ryzen 5000 processors and Radeon RX 6000 series VGA cards, will be able to experience an extra gaming and performance boost.

Through the AMD Smart Access Memory and Rage mode, the CPU has access to the GPU memory. This access unlocks the limited bandwidth to full bandwidth when running 4K gaming. By accessing the GDDR6 GPU memory more rapidly on AMD 500 series motherboards paired with Ryzen 5000 series processors and Radeon RX 6000 series VGA cards, CPU's operating performance and gaming performance are both improved. Based on results of gaming tests with Smart Access Memory and Rage Mode enabled, the 1080P gaming improved by 17%, and a performance increase of 10% was unlocked on 2K and 4K resolutions.

AMD is expected to debut its Radeon RX 6700 series based on the "Navi 22" silicon following its RX 6900 XT launch, to compete with NVIDIA's GeForce RTX 3060/Ti. Several rumored specifications of the RX 6700 series surfaced in an older report from last week, which referenced a similar compute unit count to the previous-generation RX 5700 series, but with a 25% narrower memory bus, at 192-bit. The memory amount itself has been increased by 50% to 12 GB, using higher memory density per memory channel. In that report we wondered how AMD could overcome the deficit of lower memory bandwidth, and whether an Infinite Cache solution is being used. Turns out, that the RX 6700 series should end up faster than the RX 5700 series on virtue of an enormous GPU clock (engine clock) increase, according to an Igor's Lab report.

Igor Wallossek analyzed two video BIOS images of Radeon RX 6700 series graphics cards, using MorePowerTool, and uncovered engine clock limits as high as 2854 MHz with 2950 MHz overdrive limits. Just to be clear, these are limits, and not manufacturer-set boost clocks. For example, the RX 6800 XT has a reference max boost frequency of 2250 MHz, whereas its clock limit set in the BIOS is 2800 MHz. One of the BIOS analyzed by Wallossek has a power limit of 220 W, and the other 186 W. Interestingly, the cards have the same 1075 MHz memory clock limit seen on the RX 6800 XT, which confirms that AMD is using 16 Gbps-rated GDDR6 memory, and that over a 192-bit wide memory bus, this would yield 384 GB/s of memory bandwidth. Find more technical commentary by Igor's Lab in the source link below.