ASRock Rack, a branch of ASRock focused on making server products, has today launched a new motherboard that can accommodate up to 64 core AMD EPYC CPU. Built on the new, proprietary form factor called "Deep Mini-ITX", the ROMED4ID-2T motherboard is just a bit bigger than the standard ITX board. The standard ITX boards are 170 x 170 mm, while this Deep Mini-ITX form extends the board by a bit. It measures 170 x 208.28 mm, or 6.7" x 8.2" for all of the American readers. ASRock specifies that the board supports AMD's second-generation EPYC "Rome" 7002 series processors. Of course, the socket for these CPUs is socket SP3 (LGA4094) with 4094 pins.

The motherboard comes with 4 DDR4 DIMM slots, of any type. Supported DIMM types are R-DIMM, LR-DIMM, and NV-DIMM. If you want the best capacity, LR-DIMM use enables you to use up to 256 GB of memory. When it comes to expansion, you can hook-up any PCIe 4.0 device to the PCIe 4.0 x16 slot. There is also an M.2 2280 key present, so you can fit in one of those high-speed PCIe 4.0 x4 M.2 SSDs. For connection to the outside world, the board uses an Intel X550-AT2 controller that controls two RJ45 10 GbE connectors. There are also two Slimline (PCIe 4.0 x8 or 8 SATA 6 Gb/s), and four Slimline (PCIe 4.0 x8) storage U.2 ports.

RISC-V architecture is a relatively new Instruction Set Architecture (ISA) developed at the University of California Berkeley. Starting as a "short, three-month project" the RISC-V ISA is a fifth generation of the Reduced Instruction Set Computing (RISC) ideology. A company working on this technology and helping to grow the ecosystem is SiFive. Today, they announced a big step forward for the ecosystem that will enable developers to make and optimize even more software for this architecture and platform. Called the HiFive Unmatched, the development board represents the first entry of RISC-V ISA to the world of personal computing, with its Mini-ITX form factor and PC-like connectors of power supply and I/O.

The board is home to SiFive's FU740 SoC, a five-core heterogeneous, coherent processor with four SiFive U74 cores, and one SiFive S7 core. This SoC is capable of smooth Linux OS operation, giving the developers a good platform to do their optimizations for. There is 8 GB of onboard DDR4 RAM (unknown frequencies and timing), a MicroSD card slot, and one PCIe 3.0 x4 M.2 slot for system storage. To connect the board to the outside world, you get one Gigabit Ethernet port. For user I/O there are four USB 3.2 Gen 1 Type-A ports (1 Charging port) and one MicroUSB Console port. To power the board, you need a proper power supply with a 24-pin power connector. If you plan to build a PC based on the Unmatched board, you would need a standard ITX case, as it comes in the standard Mini-ITX (170x170 mm) form factor. For more information, please check out SiFive's website.

Razer, the leading global lifestyle brand for gamers, made October 10, 2020 a day to remember for the global gaming community. Fans across the world tuned in to the inaugural RazerCon to watch Razer CEO Min-Liang Tan's live mixed-reality keynote - a one-of-a-kind interactive session hosted against the iconic Singapore skyline. This was followed by Razer panels on new and unannounced products, and exclusive content showcases and giveaways from game studios such as Romero Games, Perfect World Entertainment, Paradox Interactive and technology partners such as Intel, NVIDIA and Western Digital.

The event was a huge hit with the fans, peaking at over 1 million concurrent viewers with a total of more than 250,000 hours viewed and 175 million impressions across Twitter, Facebook, YouTube, and Twitch. In a true celebration of all things gaming, highly decorated veterans of the industry, including Brenda and John Romero, and Haz Dullul, presented their newest projects, whilst leading gaming celebrities CloakZy, CourageJD, PaladinAmber and many others engaged with the community during their sessions.

AMD Project Quantum has been quite a mysterious product. While we knew that is was an ITX sized, water-cooled case that would feature an Intel CPU with AMD GPU, we never knew if it was coming or not. Featuring a unique, two-chamber design, AMD managed to develop two sections, where one is used for all the compute components, and the other one contains the radiator and fan for dissipating the heat produced by the compute chamber. Four years ago, we got the news that the project isn't dead and that it will get an update with AMD's upcoming Zen CPU and Vega GPU back then. However, since that announcement, there was no word on it.

Until today. Thanks to a Twitter user PeteB(@Pete_2097) who found a newly listed patent, the hope of Project Quantum is not yet dead it seems. On September 15th, AMD filed a patent for the Project Quantum, now protecting the unique design and possibly saving it for some time in the future. It is almost certain that the company has not abandoned the project, and it could be just waiting for the right time to launch it.

The leading global motherboard manufacturer, ASRock, proudly introduce the new motherboard lineup for AMD A520 chipset, a new value solution to join the AMD 500 series family. The newly launched ASRock AMD A520 motherboards brought the support of latest AMD 3rd Gen Ryzen Desktop Processors along with stunning performance to the masses.

"At AMD, our goal is to provide every PC user with the most powerful, flexible and reliable user experience across all verticals," said Chris Kilburn, corporate vice president and general manager, client component business unit, AMD. "We are pleased to introduce the AMD A520 chipset, offering a robust platform for the award-winning 3rd Gen Ryzen Desktop Processors alongside a promise for future support of the upcoming "Zen 3" architecture. With creative designs in a range of form factors from Mini-ITX to full size Micro-ATX coupled with an abundance of connectivity options from our partners at ASRock, the A520 chipset will offer a streamlined and trusted platform to satisfy even the most demanding home and office PC users."

ASRock Rack today unveiled a pair of Socket AM4 motherboards targeted at SFF workstation and compact server builds. Both boards are based on the AMD X570 chipset, and include the X570D4U-2L2T, and the X570D4I-2T. The larger X570D4U-2L2T is built in the Micro-ATX form-factor, and comes with support for 3rd Gen Ryzen "Matisse" and "Picasso" processors (for now). The board is designed with its components and heatsinks aligned for server rack airflow. It draws power from a combination of 24-pin ATX and 8-pin EPS connectors, conditioning it for the CPU with a 6+2 phase VRM. The AM4 socket is wired to four DDR4 DIMM slots that supports both ECC and non-ECC UDIMMs. Expansion includes one PCI-Express 4.0 x16, a gen 4.0 x8, and a gen 4.0 x1.

Storage options on the X570D4U-2L2T include seven SATA 6 Gbps, from which one is high-powered to support DOMs; and two M.2-2280 slots with PCIe 4.0 x4 wiring, one of which even has SATA 6 Gbps wiring. Enterprise-relevant features include two 10 GbE networking interfaces driven by an Intel X550-AT2 controller, two 1 GbE interfaces handles by Intel i210-series controllers; an ASPEED IPMI+iKVM management chip that also puts out basic display; and various server-relevant legacy connectivity.

Jonsbo today unveiled the V8, a cuboid-shaped Mini-ITX case featuring a 2-piece slide out chassis design. The internal steel chassis of the case slides out intact of the outer aluminium-magnesium alloy body that has a silver/gray matte finish. The outer body features a floating front intake that conceals the case's main fan vent; and additional vents along the sides and top. The front intake features a large 200 mm fan that maintains positive air pressure inside the case; and mounts for two 140 mm/120 mm fans along the top, and one 140 mm/120 mm rear exhaust.

The Jonsbo V8 offers room for a Mini-ITX motherboard with room for full-height graphics cards up to 33 cm in length, and CPU coolers up to 19.5 cm in height. There are two expansion slots, however, there's enough room for a graphics card that's slightly thicker than 2 slots. An internal SFX/SFX-L PSU bay is wired to an AC receptacle extension at the rear. Stroage areas include two 3.5-inch bays and a 2.5-inch mount. Front panel connectivity includes one each of USB 3.2 type-C, USB 3.2 type-A, and HD audio jacks. The case measures 249.5 mm (W) x 390 mm (D) x 260MM (H). The company didn't reveal pricing.

SilverStone rolled out the Lucid series LD03-AF (Airflow version) tower-type case for Mini-ITX and Mini-DTX form-factor platforms, a new variant of the LD03 case from Q1-2019. The case was debuted at the 2020 International CES. What sets the LD03-AF apart from the original LD03 is additional vents on one of the front-facing side panels, designed to improve airflow for graphics cards that feature axial fans. The original LD03 had a slab of glass that smothered graphics cards. Although essentially a cuboid, the case is meant to be displayed with its right side pillars facing forward, as the main glasshouse spans the front and right side panel. Inside, the motherboard tray is aligned perpendicular to the plane of the base, but with its I/O shield pointing upward, such that your graphics card stands along the height of the case.

The LD03-AF serves up room for graphics cards up to 30.9 cm in length, and 16.7 cm in height; and CPU coolers up to 19 cm in height. The case's sole airflow channel is designed to draw air from a 120 mm intake fan at the base, with a 120 mm exhaust fan at the top, both with dust filters. Storage areas include one 3.5-inch and two 2.5-inch drive bays. The case supports SFX and SFX-L PSUs. The case has its own AC receptacle and M-to-F cable leading to your PSU. Measuring 265 mm (W) x 414 mm (H) x 230 mm (D), the case dry-weighs 5.22 kg. The case is expected to be available by June 25, with an expected price around $130.

MSI, the world-leading motherboard manufacturer, proudly introduces the latest MEG Z490 UNIFY and MEG Z490I UNIFY into MSI Z490 motherboards. Appearance wise, it is dedicated to users who prefer something other than RGB, the black design with embossed dragon mylar symbolizing a mysterious and high-quality image without the redundant LEDs. Performance wise, it is tailored for hardcore gamers and enthusiasts, emphasizing the true value of the motherboard and enhancing not only the thermal but also power solution, combines MSI's premium layout, digital power design and exclusive Mirrored Power Arrangement, MEG UNIFY series is ready for the challenge of high-end processors.

All MSI Z490 series including UNIFY motherboards are PCI-E Gen 4 ready. Adopting tons of components, enhanced layout placement and PCB design dedicated for PCI-E Gen 4 solution, the MSI Z490 series motherboards ensure higher bandwidth and faster transfer speeds stability. It is ready 4 the future.

BIOSTAR, a leading brand of motherboards, graphics cards, and storage devices, today announces the A68N-2100K SoC motherboard that comes with an in-built AMD E1-6010 Processor. Throughout many decades, BIOSTAR has been revered as one of the best manufacturers of robust, highly reliable motherboards with a wide array of models on both Intel and AMD platforms to choose from and a plethora of supplementary components catering to many user preferences globally.

Modern technology meets sleek, refined form factor as BIOSTAR's A68N-2100K SoC Mini-ITX motherboard is unveiled to the world with an inbuilt AMD E1-6010 Processor and support for AMD Radeon R2 Graphics.

Taking aim at Creators, Gamers and other DIY-ers, Fractal Design today launched an innovative, small form factor chassis through close collaboration with Intel. "We were very excited about partnering with Intel in developing this case," says Fractal Design founder Hannes Wallin. "It inspired us to take on a project that challenges the convention that elegant design can't be combined with flexible functionality, and we're very happy with the result."

Available today, the Era ITX is the next generation of Mini-ITX case design. This compact chassis is free from the configuration limitations traditionally associated with small form factor systems. This unique product brings the perfect combination of elegant design and technical engineering to PC hardware innovation. Era's design presents a surfaced, aluminium exterior that is paired with top inserts ranging from wood to tempered glass. This combination of materials along with a variety of colorways presents a spectrum of choices to the user.

We've just posted our Fractal Design Era case review.

AMD today announced the expansion of the AMD Ryzen Embedded ecosystem with two new AMD Ryzen Embedded R1000 low-power processors that provide customers with a new TDP range of 6 up to 10 W. AMD also announced new customers offering Mini PCs based on the AMD Ryzen Embedded processors from Sapphire, SECO, Simply NUC and others.

"AMD is ushering in a new age of high-performance computing for the embedded industry," said Rajneesh Gaur, corporate vice president and general manager, Embedded Solutions, AMD. "We are doing this with cutting-edge technology to display immersive graphics in 4K resolution with AMD Ryzen Embedded processors, and we are now offering access to high performance in power-efficient solutions with these new low-power Ryzen Embedded R1000 processors."

NZXT, a leading developer of software-powered hardware solutions for PC gaming, today announces the NZXT H1, a small form factor Mini-ITX case that includes an SFX-L 650w 80+ Gold PSU, 140 mm AIO, and PCIe riser card pre-installed for a simple building experience. In addition, the NZXT H1 is the focal point for a new high-end pre-build option for NZXT BLD called H1 Mini PC.

"Creating a small form factor case is something we have always wanted to improve upon because they are often challenging to build in and can hinder the performance of high-end hardware." says Johnny Hou, Founder and CEO of NZXT. "That is why we simplified the building process and focused on performance when designing the NZXT H1. We set out to make this one of the easiest builds you can undertake while leaving no compromises when gaming."

MetallicGear, powered by Phanteks, today announced the new addition to the NEO series, the NEO Qube. The NEO Qube sports dual tempered glass panels with integrated smooth Digital-RGB lighting making this the perfect showcase to display your system from every angle.

The NEO Qube features a spacious dual-chamber interior that brings a smooth building experience, heat separation for better cooling and supports powerful hardware. Combined with the Phanteks Revolt X power supply, the NEO Qube can even support 2 motherboard installations (E-ATX + ITX), which brings more possibilities for streamers, professionals, and multi-users looking for dual system support.

Palit has today released the latest addition to its KalmX passive series of graphics cards - the GTX 1650 KalmX. This graphics card is an ITX-sized, 178 mm long GPU that is designed for zero noise, passively cooled builds, where noise is the primary factor. With a heatsink consisting out of two heat-pipes and many fins, the cooling solution should be capable of cooling the 75 W TDP of the GTX 1650 GPU. The cold plate of the heatsink covers the GPU and VRMs to provide safe GPU operation. Being based on the reference design, this card features default speeds of 1485 MHz base, and 1665 MHz boost clocks. For IO, Palit opted to include three ports, where one is HDMI 2.0b and the other two are DisplayPort 1.4a. All the power needed is provided by the PCIe slot, so there are no external power connectors.

Thanks to the findings of VideoCardz, we have information that GIGABYTE has listed its upcoming motherboards for AMD and Intel platforms. Starting with AMD's upcoming mid-range chipset, the B550 model is supposed to bring PCIe 4.0 connectivity options to lower-priced motherboard variants. So far, only high-end chipset versions like X570 had PCIe 4.0 support, while the mid-range option was lacking. GIGABYTE has prepared a total of six B550 AORUS models, along with a GAMING series which is supposed to be a tier below AORUS models. The B550 chipset will span all motherboard sizes, including ATX, Micro-ATX, and Mini-ITX.

In the EEC listing, GIGABYTE also submitted Intel's upcoming Z490 motherboards for Comet Lake-S CPUs. In the listing, we see a total of 15 motherboards listed with an unusable entry. Again the W480 chipset appears, which is meant to power workstation motherboards. This chipset will go inside a new motherboard lineup called the "VISION" series. While we don't know what this new series brings, we know that both the workstation enabled W480 chipset and regular Z490 chipset will be a part of it.

As we gear up for another Intel CPU launch with their 10th Gen Comet Lake-S CPUs with up to 10 cores, motherboard manufacturers have to go through the process of getting their products approved through various regulatory requirements. The Eurasian Economic Commission is one which constantly gives little snippets towards the future, and now, MSI motherboards based on Intel's Z490 chipset and LGA 1200 socket have shown up.

Knowing MSI's usual staple of motherboards for each product generation, there aren't many surprises here. The entries refer to these MSI motherboards: Z490-A PRO (Standard ATX); Creator Z490I (Mini-ITX); MAG Z490 TOMAHAWK (Standard ATX); MPG Z490M GAMING EDGE WIFI (Micro-ATX); MPG Z490 GAMING; CARBON WIFI (Standard ATX); MPG Z490 GAMING PLUS (Standard ATX); MEG Z490I UNIFY (Mini-ITX); MEG Z490 UNIFY (Standard ATX); MPG Z490 GAMING EDGE; WIFI (Standard ATX); MEG Z490 ACE (Standard ATX); MEG Z490 GODLIKE (E-ATX). You can expect the GODLIKE to be so in both features and price, as usual, topping out MSI's lineup.

iBUYPOWER, a leading manufacturer of custom gaming PCs, today announced the next generation of its signature Revolt series. The Revolt GT3 will take on a new aesthetic compared to the asymmetrical design of its predecessors.

Housing small form factor (SFF) systems and providing support for ITX motherboards and SFX power supplies up to 750 W, the Revolt GT3 will truly take on a unique layout. Systems constructed in the Revolt GT3 will be mounted to and suspended inside an outer frame by flexible rubber supports designed to add both cushion from shock and vibration damping.

PowerColor is readying a small form-factor friendly custom-design Radeon RX 5700 graphics card, called simply the PowerColor RX 5700 ITX. With a length of 17.5 cm, standard 11 cm height, and strictly 2-slot thickness, the card uses a dense aluminium fin-stack heatsink with four 6 mm-thick nickel-plated copper heat pipes that make direct contact with the GPU at the base, ventilated by a single 80 mm fan. More interestingly, the card draws power from a single 8-pin PCIe power connector (225 W max power input for the connector + PCIe slot).

Unsurprisingly, the PowerColor RX 5700 ITX sticks to AMD-reference clock-speeds of 1465 MHz base, 1625 MHz gaming, and 1725 MHz boost, with the memory ticking at 14 Gbps (GDDR6-effective). Despite its compact cooling solution, the card does not skimp on idle-fan-off. Display outputs include two DisplayPort 1.4, and one HDMI 2.0. Based on the 7 nm "Navi 10" silicon, the RX 5700 features 2,304 stream processors across 36 RDNA compute units, 144 TMUs, 64 ROPs, and a 256-bit wide GDDR6 memory interface, holding 8 GB of memory. PowerColor didn't reveal pricing of the card, as it will formally launch it later this month.

Akasa today rolled out the Cypher MX3, a Thin Mini-ITX case for low-profile, fan-less desktop builds meant as digital signage boxes, thin clients, or low-power desktops that you tuck away behind your monitor. Measuring 208 mm x 203 mm x 45 mm (WxDxH), which amounts to a lunchbox-sized volume of just 2 liters, the Cypher MX3 features a SECC steel construction with a ventilated 3-sided panel covering the top and sides. Its front panel provides two each of USB 3.1 type-A, two USB 2.0/1.1, and HDA jacks. Besides the motherboard, there's room for a 2.5-inch drive inside. The case is designed for external power-bricks that plug in directly to the motherboard, which provides power for your SSD. Available now, the Akasa Cypher MX3 is priced at USD $59.

Antec, leading provider of high-performance computer components and accessories for the gaming, PC upgrade and Do-It-Yourself market, shows off a new angle of innovation: the new open-frame Mini-Tower "Striker" is now commercially available at MSRP USD$ 249.99 in US.

Striker is designed for custom water-cooling enthusiasts. Characterized by its irregular shape, unique form and innovative structure, Striker is the first open case featuring a front-placed VGA design, ITX form factor and bold styling. Shaped into a spectacular open-air frame, Striker measures 420 mm x 230 mm x 410 mm and comes with a front GPU mount. Located on the right side, the front access includes a Type-C 3.1, 2x USB 3.0 ports, HD Audio and power button.

InWin has today announced two new chassis developed in partnership with ASRock's Phantom Gaming Alliance: the 103 Phantom Gaming Edition and A1 PLUS Phantom Gaming Edition. The 103 and A1 PLUS are suitable for ATX and Mini-ITX gamers respectively that are looking for a brand-aligned build. The chassis showcase ASRock's Phantom Gaming "Fast, Mysterious, and Unbeatable" styling of red and grey accents among both all-black chassis.

"With our strong heritage in creating chassis designed for PC gamers, we are excited to join the ASRock Phantom Gaming Alliance. InWin and ASRock share a spirit that aims to give gamers the best hardware for their systems, and by working together we assure them that our high-quality products work well together." said Nelly Hsieh, Global Marketing Manager at InWin.

Antec Inc., a leading provider of high-performance computer components and accessories for the gaming, PC upgrade and Do-It-Yourself market, presents the latest addition to their range of enclosures: the Antec NX400. The mid-tower is now commercially available from 53,99€ (suggested retail price including VAT). Antec's NX -Series offers a wide range of gaming cases featuring LED lighting and eye-catching front panel designs. The models NX100, NX210, NX300 NX400, NX500, NX600 and NX1000 are the latest models on the European market.

The new Antec ATX case ensures an easy building experience, supports high end components without breaking the bank. It features a full-sized plastic side window panel to show off your components. The entry-level enclosure measures 425 x 230 x 465 mm (D x W x H) and is compatible with ATX, micro-ATX and Mini-ITX motherboards. The NX400 supports VGA cards with a length of up to 330 mm and CPU-radiators with a maximum height of 170 mm. It accommodates up to a total of six 120 mm fans, and includes one 120 mm rear exhaust fan to start with. Furthermore, the NX400 offers space for a 360 mm water-cooling radiator in the front, a 240 mm radiator on the top and a 140 mm radiator at the rear of the chassis.

ASUS today rolled out an entry-level mini-ITX motherboard for the AMD socket AM4 platform, the Prime A320I-K. Based on the AMD A320 chipset, the board supports 1st and 2nd generation Ryzen processors out of the box, including the 8-core models. The tiny A320 chipset is tucked away behind a metal heatspreader underneath the M.2-2280 slot. The board draws power from a combination of 24-pin ATX and 8-pin EPS connectors, conditioning it with a 6-phase VRM that makes do without a heatsink.

Storage connectivity on the A320I-K includes four SATA 6 Gbps ports, and an M.2-2280 slot with PCI-Express 2.0 x4 and SATA 6 Gbps wiring from the SoC. The board's lone expansion slot is a PCI-Express 3.0 x16. USB connectivity includes six USB 3.1 gen 1 ports, four on the rear-panel and two via headers; and four USB 2.0 ports, of which two are via headers. Display connectivity includes one each of DisplayPort and HDMI. Networking is care of a single 1 GbE interface driven by a Realtek RTL8111H controller, and the onboard audio solution is an entry-level Realtek ALC887. We expect the Prime A320I-K to be priced around $60.

FSP, one of the world's leading power supply manufacturers, is pleased to announce two models in its brand-new line of DAGGER PRO SFX power supplies: the DAGGER PRO 550W and DAGGER PRO 650W. The DAGGER PRO series is an advanced version of our popular DAGGER PSU series, with improvements in efficiency, design, and connectivity. The new DAGGER PRO PSUs are fully SFX12V V3.3 standard compliant and can easily be integrated into the ATX chassis. They reduce cable clutter to a minimum, thanks to their modular design and high-grade ribbon cables - you only need to plug in the cables that you will actually use.

The powerful single +12V rail design of the DAGGER PRO series continually delivers maximum performance for the most demanding components, while FSP's unique MIA IC chip and DC-DC design provide safety and power efficiency. With an 80 Plus Gold rating, both models deliver high efficiency and low noise levels thanks to their semi-fanless design in which a large 92 mm ball-bearing fan cools only when required. With all these features, they are excellent for environment that requires minimum noise.