Here's the first picture of SilverStone's next flagship smart-PSU line, the ZEUS. The company is expected to launch these in several high-Wattage variants, the one on display here is the 1200W variant. This fully-modular unit has enough juice and straws to power a GTX 980 Ti Quad-SLI machine. Its key features include a single +12V rail design, with a single 100A rail, 80 Plus Platinum efficiency, a temperature-activated 140 mm fan, which stays off below a temperature/load threshold, most modern electrical protection mechanisms, and an onboard sensor suite. The PSU talks to your system over USB (internal USB 2.0/1.1 connector), interfacing with a neat little tool that lets you monitor temperature, power-draw, efficiency, and other parameters for each of its voltage domains; and lets you customize its fan speeds.

GamingPC.ca, a leader customized water cooled gaming computers, introduces The Beast, a water-cooled 8 core Intel's new 5960X clocked at 4.4 GHz, 64 gigs of GSkill DDR4 memory and 4 x NVIDIA GeForce Titan Black in Quad-SLI built for the high end gaming market. Other specs include a custom water cooling solution, a 1 terabyte SSD, 8 terabytes of additional storage, the new Asus X99 Deluxe motherboard.

"Our customers demand the best money can buy so that's what we aim to provide," says Sebastien Piche, owner of GamingPC Canada. "The goal with this new system was to break all previous speed records and provide a smooth 4K gaming experience for our customers."

Futuremark rolled out a major update to its 3DMark benchmark suite. Update v1.1.0 introduces Ice Storm extreme preset for the Windows version of the software (it was exclusive to the Android version), and optimizes the software for four-GPU and three-GPU setups. This could improve the scores for setups with GeForce GTX 690 Quad-SLI or Radeon HD 7990 CrossFireX. Months of work was put into getting this part right, according to the developer. Ice Storm extreme preset adds yet another way to test entry-level graphics solutions, using a DirectX 9.0c feature-level scene.DOWNLOAD: 3DMark v1.1.0

Zotac is another NVIDIA partner who isn't pleased that the GeForce GTX 480 isn't holding performance leadership, but has the engineering potential to outdo it. Earlier in June, Galaxy showed off a dual Fermi graphics card that makes use of two GF100 graphics processors in the GeForce GTX 465 configuration. Zotac waited for a more mature implementation of the Fermi architecture, found out that the GF104-based GeForce GTX 460 isn't lacking much in performance compared to the GTX 465, with vastly better thermal specifications, and went on to design its latest high-end card, which it now refers to as the Zotac GeForce GTX 460 X2. The card makes use of two GeForce GTX 460 1 GB GPUs in an internal SLI, much like every other dual-GPU NVIDIA card.

The card uses an NVIDIA nForce 200 bridge chip to semaphore and broadcast data between the two GPUs, a dual 3+1+1 phase VRM that draws power from two 8-pin PCI-E power connectors, and display connectivity is relayed to the rear-panel from both the GPUs, that's four dual-link DVI, and one mini-HDMI. What this also means is that with just this one card, you can use the 3D Vision Surround feature, while retaining SLI multi-GPU scaling. If that's not all, there's a SLI connector, which lets you pair this with another card of its kind, for GTX 460 Quad-SLI. Zotac is yet to finalize a cooling solution to suit it best. GF104 could be NVIDIA's easiest route to a dual-GPU graphics card that establishes performance leadership. The GF104 physically has 384 CUDA cores (336 on Zotac's card, since it's in the GTX 460 configuration), and has shown to be capable of high GPU/Shader clock speeds. More details about Zotac's card are awaited.

ASUS stirred up the enthusiast community recently with its dual-GeForce GTX 285 accelerator that for the first time, lets four fully-loaded G200b GPUs function in quad-SLI. Perhaps responding to it, EVGA rolled out the EVGA GeForce GTX 285 Classified (01G-P3-1190-AR), the first single-GPU GeForce accelerator to support 4-way SLI (or Quad-SLI). With a small but significant number of SLI-compatible motherboards with four PCI-Express x16 slots already out there, EVGA hopes to cash in with its newest product.

The GeForce GTX 285 Classified sticks to reference NVIDIA clock speeds of 648/1242 MHz (core/memory), while leaving it to the user to overclock it, by providing a number of design enhancements. It also sticks to having 1 GB of memory. To begin with, this card features a full 8-phase digital-PWM power design, and makes use of high-grade components such as film capacitors. It draws power from three 6-pin PCI-E power connectors. Voltage measure points for VPLL, DRAM VDDQ, DRAM VDD, and VGPU are nucleated in a convenient location for easy measurements. The card supports EVGA's EVbot device that provides control over the card's parameters in the hands of the user. The EVbot can be directly plugged in to the card. Finally, the card supports 4-way SLI. At this point what its SLI bridge looks like is not known, but hopefully it's provided with the card or the EVGA's newest motherboard. It has been listed on the company store for US $379.99, currently on pre-order.