SilentiumPC introduces a new series of proprietary all-in-one CPU liquid cooling solutions. The Navis RGB series is available in three variants with the different radiator sizes 120, 240 and 280. The units focus on great built-quality, reliability and performance while incorporating discreet RBG illumination. Compatibility to latest CPU sockets and easy installation assure that even novice users are able to enjoy all the advantages of the new all-in-one CPU liquid cooling solutions.

Navis RGB water block features professional-grade copper bearings and 9-pole motor pump to ensure smooth and noise-free operation. Copper cold-plate with series of flow-optimized channels enable efficient heat transfer to an all-aluminum, single or dual 120/140 mm radiator. High static pressure Sigma HP RGB fans are the perfect match for the radiators, as they are offering optimum airflow through the fin matrix. All the units are equipped with 380 mm long and extremely durable yet flexible tubes, allowing for multiple installation options, either in front, top or rear of the case.

SilentiumPC offers a new variant of the Armis AR7 PC Chassis with tempered-glass to satisfy the strong market demand. The new Armis AR7 TG inherits all the advanced features from the Armis AR7 base model and gives users the advantage of displaying their high-end and RGB-enabled components through the new side-panel. The roomy full-tower cleverly blends minimalistic styling with performance features. Armis AR7 TG comes with three pre-installed Sigma Pro 120 mm case fans for high-volume, non-restrictive airflow. For simple maintenance, all vents are covered with easily removable custom dust filters.

SilentiumPC today rolled out the Gladius GD8 TG ARGB Pure Black case. This ATX mid-tower is characterized by an asymmetric band that runs from the center of the front, through the top, with its gaps with the rest of the panels being embellished with RGB LED diffusers. The left side panel features a clear tempered glass panel. While the RGB LED units are addressable, meaning you can control them via your motherboard's RGB software, SilentiumPC also included an RGB controller module wired to a button on the front-panel, which cycles through 50 lighting presets.

Inside, the Gladius GD8 features a conventional layout, with horizontal partitions. The motherboard tray serves up room for graphics cards up to 37 cm in length, and CPU coolers up to 17.8 cm in height, and the bottom compartment can hold PSUs up to 21 cm in length. Storage features include two 3.5-inch trays that can each hold 2.5-inch drives, and two additional 2.5-inch mounts. SilentiumPC is including three Sigma Pro 120 fans with the case, two fitted as front intakes, and a rear exhaust. There are two 120 mm front intakes, two 120 mm top exhausts, and a 120 mm rear exhaust. Measuring 219 mm x 455 mm x 496 mm (WxDxH), the case dry-weighs around 7 kg. The company didn't reveal pricing.

The European cooling and PC case brand SilentiumPC upgrades its airflow-oriented Regnum RG2 case by adding a tempered-glass side-panel. While being part of the entry-level portfolio of the SilentiumPC lineup, Regnum RG2 has surprisingly much to offer. It merges a bold yet classy front-panel with a modern interior layout and an extended I/O panel, making it a great choice for reasonably priced gaming systems.

Regnum RG2 TG is designed to surpass the user's expectations of an average entry-level chassis. The clean and well balanced exterior design with a big tempered-glass side-panel gives a great view on the components inside the roomy interior. SilentiumPC uses the dual-chamber layout, which dramatically improves airflow and benefits cable management.

One of SilentiumPC all-time favorite cases is now available as a variant with tempered-glass. The Regnum RG1 TG offers a new side panel, that blends seamlessly with understated exterior design for an elegant yet modern gaming case. RG1 is a dream come true for value-oriented buyers as it combines praised features with high-quality at an entry-level price point.

Regnum RG1 TG surprisingly roomy interior features a modern dual-chamber internal layout, which dramatically improves both airflow and cable management. Being compatible with ATX motherboards, long power supplies, high-end graphics cards with up to 380 mm length and CPU coolers up to 160 mm, it allows for flexible choice of components. In addition to that, Regnum RG1 TG comes with two external 5,25" drive bays as well as two 3,5 and two 2,5" internal drive bays for desired HDD/SDD configurations.

The European brand SilentiumPC presents the new Spartan 3 PRO RGB HE1024 as a cost-effective alternative to stock CPU coolers, which is intended for professional system builders and DIY projects on a budget. This extremely compact and lightweight cooler utilizes four 6 mm Heatpipes and aluminum heatsink for excellent cooling performance and oversized Sigma PRO RGB 100 PWM-controlled fan for quiet operation.

Its new RGB Illumination system lights up the fan with stunning yet discreet colors and effects. All the major motherboard RGB systems are supported, including Asus Aura, ASRock RGB LED, EVGA RGB and MSI Mystic Light as wells as manual control via the included Nano RGB controller, making the Spartan 3 PRO RGB a ready-to-go RGB solution.

Fera 3 RGB HE1224 brings highly anticipated RGB illumination while still providing the ultimate blend of compact dimensions, high efficiency at an competitive price. In other words, the versatility that Fera users praised so much. Newly implemented illumination system lights up the fan and the top plate with stunning yet discreet colors and effects. Supporting all major motherboard RGB systems such as ASUS Aura as wells as manual control via the included Nano RGB controller, the Fera RGB is a ready-to-go RGB solution on a budget.

Based on a proven thermal platform, the Fera 3 RGB utilizes an asymmetrical heatsink design with four 6 mm high performance copper heatpipes with HE technology - direct contact with the CPU for fast and efficient heat dissipation. To ensure the cooler is as quiet as it is efficient, it was paired with the Sigma HP RGB 120 mm PWM-controlled fan. Optimized blade design significantly reduces noise while providing sufficient airflow at 1.600 RPM, allowing the cooler to work even with high TDP processors.

Next level value for money meets maximum airflow and RGB illumination in the new SilentiumPC Regnum RG4T(F) RGB chassis. Based on a dual-chamber internal layout, it offers functionality and solutions for all modern system requirements, supports up to 380 mm long graphics cards and up to 159 mm tall CPU coolers.

To ensure proper cooling properties Regnum RG4T(F) RGB has a mesh-type front panel and comes equipped with three quiet 120 mm RGB case fans. The system can be extended to up to six fans in total, which can be controlled via the built-in fan controller. Liquid cooling enthusiasts will appreciate radiator mounting spots at the top (120/240) and front (120/240/360) for either various AIO solutions or custom loops. The interior is cleverly divided into two thermally independent chambers, allowing for more effective cooling. Power Supply Units and Hard Drives are mounted in the lower chamber and the other components in the main chamber on top. The Regnum RG4T(F) RGB is equipped with three pre-installed dust filters, located at the front, top and the bottom to keep the interior dust-free. Convenient cable management is achieved thanks to numerous pass-through openings and cable tie points.

Introducing SilentiumPC Sigma Pro Corona RGB 120 Kit, a product that will instantly bring any PC system up to speed with the RGB revolution! The kit includes three 120 mm Sigma Pro Corona RGB fans and a tiny yet powerful Nano RGB controller. Built-in inside the ring-shaped casing there are 18 bright RGB LEDs that enable the user to choose from any color to create stunning lightning effects. Three methods of controlling these effects are available.

The newest addition to SilentiumPC lineup, the Armis AR3, is a modern midi-tower chassis offering subtle styling and unparalleled practicality. The unique signature of the Armis series includes design cues such as the bold front vents for high-level airflow and the movable I/O panel. Armis AR3 is available in three different versions:

• This regular base version comes with a full metal side panel and the special "blackout" button, which turns all HDD and power LEDs off for complete stealth, especially useful for night rendering/simulation sessions.
• TG version features tempered glass side panel, which combined with great value for money offers a great start for future RGB build.
• TG RGB version comes fully packed with interior illumination and built-in internal control box. Supporting all major motherboard RGB systems or manual control via front switch, the AR3 is the ready-to-go RGB solution on a budget.

Introducing the new mid-range chassis from SilentiumPC, the Armis AR7. Available with traditional all-black, solid panel or tempered-glass window, packed with RGB lights. This roomy full-tower cleverly blends minimalistic styling with performance features. With cooling being a major focus the front vents were specifically designed to provide high-volume, non-restrictive airflow, comparable to fully mesh designs. For simple maintenance, they are covered with easily removable custom dust filters.

A unique feature is the user-friendly I/O panel which can be repositioned from the top to the bottom for convenient access to USB/audio ports and fan/illumination switches. Apart from two LED strips and ring-type fan, the Armis AR7 TG RGB also offers the option to mount the GPU vertically for showing off that precious card you managed to sneak through the miners. On the other side of the spectrum there is the classic AR7 version with a special "blackout" button which turns HDD and power LEDs off, especially useful for night rendering/simulation sessions.

Introducing the new mid-range chassis from SilentiumPC, the Armis AR7. Available with traditional all-black, solid panel or tempered-glass window, packed with RGB lights. This roomy full-tower cleverly blends minimalistic styling with performance features. With cooling being a major focus the front vents were specifically designed to provide high-volume, non-restrictive airflow, comparable to fully mesh designs. For simple maintenance, they are covered with easily removable custom dust filters.

A unique feature is the user-friendly I/O panel which can be repositioned from the top to the bottom for convenient access to USB/audio ports and fan/illumination switches. Apart from two LED strips and ring-type fan, the Armis AR7 TG RGB also offers the option to mount the GPU vertically for showing off that precious card you managed to sneak through the miners. On the other side of the spectrum there is the classic AR7 version with a special "blackout" button which turns HDD and power LEDs off, especially useful for night rendering/simulation sessions.

SilentiumPC today introduced the Navis Pro series all-in-one, closed-loop liquid CPU coolers. These coolers are available in two models based on radiator size, the Navis Pro 120 (120 mm x 120 mm radiator), and the Navis Pro 240 (240 mm x 120 mm radiator). What sets this cooler apart is a unique 9-pole pump motor that keeps the noise output of the pump-block under 15 dBA at all times.

The included Sigma HPE fans come with fluid-dynamic bearings for high endurance, and spin between 800 to 2,300 RPM, pushing up to 74 CFM of air, with a noise output as low as 22 dBA, each. The pump-block has a rated MTBF of 80,000 hours. Most common CPU socket types are supported, including AM4, AM3(+), FM2(+), LGA2066, LGA2011(v3), and LGA115x. Backed by 5-year warranties, the Navis Pro 120 is priced at 55€, and the Navis Pro 240 at 75€.

Next level value for money meets maximum airflow in the classic Regnum RG4 chassis. Based on dual-chamber internal layout this model offers functionality and solutions for all modern system requirements, supports up to 380 mm long graphics cards and up to 159 mm tall CPU coolers. To ensure proper cooling properties Regnum RG4 comes equipped with three quiet 120mm fans and full range of intake dust filters. The system can be extended to up to five fans in total and can be controlled via built-in fan controller. Liquid cooling enthusiasts will appreciate radiator mounting spots at the top (120/240) and front (120/240/360) for either various AIO solutions or fully custom loops.

Four different variants are available. Choose from classic, solid side panel (RG4, RG4F) or trendy tempered-glass for showing all your precious hardware (RG4T and RG4TF). Our regular Pure Black color has now a fresh alternative, Frosty White.

SilentiumPC today introduced the Vero L2 Bronze series of mainstream power-supplies (PSUs). Available in two models - 500W and 600W, the PSUs offer low-noise fans, fixed cabling, and boasts of 80 Plus Bronze switching efficiency, besides an up to date standards compliance (ATX 12V 2.31, and Intel Core new C6/C7-states support). Under the hood, the Vero L2 Bronze features a single +12V rail design, a resonant LLC converter, active PFC, and most common electrical protections, including over/under-voltage, overload, input surge, and short-circuit protection.

Both variants of the SilentiumPC Vero L2 Bronze offer the same connector loadout - a 24-pin ATX, a 4+4 pin EPS, two 6+2-pin PCIe power, seven SATA power, three 4-pin Molex, and one 4-pin Berg (floppy). Besides the 24-pin ATX, all connectors feature flat ribbon-type cables. The units are cooled by a 120 mm PWM fan that's been optimized for low noise, and stays at 20% of its rated 1,800 RPM speed up to 30% of load. The units are backed by 3-year "door to door" warranty. The company didn't reveal pricing.

SilentiumPC has announced the Fortis 3 HE1425 v2 CPU-cooler which is a much cheaper version of the award winning Fortis 3 HE1425 Malik Customs Edition. Despite a much more attactive price the Fortis 3 HE1425 v2 is still offering the same cooling performance. Engineered to achieve optimal balance between heat dissipation and airflow it uses five high performance heatpipes transferring heat efficiently to 38 aluminum fins. In terms of styling the Fortis 3 v2 has a black top with black caps sealing the heatpipes.

The former properties of the cooler remain otherwise unchanged. The asymmetric high performance cooling body consists of aluminum fins and heat pipes, which have a direct contact to the processor and form the basic framework. For the corresponding heat dissipation there is a quiet Sigma Pro 140mm-PWM-fan included. The in-house Pactum PT-2-thermal paste also comes in the package.

SilentiumPC introduced the Grandis 2 XE1436, its flagship CPU air cooler. This D-type aluminium fin twin-stack cooler can deal with thermal loads of up to 250W, making it ideal for HEDT CPUs in the LGA2011v3 package, or even certain high-TDP AMD FX chips. The heatsink features an exposed copper base, from which six 6 mm-thick copper heat pipes make indirect contact with the CPU, passing through the two aluminium fin stacks on their both ends.

The fin-stacks and tips of the heat pipes are topped off with matte-black covers. The cooler includes two fans, a 120 mm SilentiumPC Sigma Pro (push), and a 140 mm Sigma Pro-L (nested between the two fin-stacks). Both fans feature 4-pin PWM power inputs. The cooler measures 130 mm x 105 mm x 159 mm, and weighs 1.03 kg. It supports all modern CPU socket types, including LGA2011v3/LGA2011, LGA115x, LGA1366, AM3(+), and FM2(+). A tube of SilentiumPC Pactum TIM comes included. The company didn't reveal pricing or availability information.

SilentiumPC announced the Regnum RG1 Pure Black chassis. With the new Regnum RG1 saving money on a case has never been easier. It's the first value-oriented chassis with dual-chamber internal layout which dramatically improves both airflow and cable management. Added advantage is how clean and seamless the complete PC system looks with very little effort.

RG1's incredibly roomy interior allows for very flexible choice of components as its compatible with ATX motherboards, long power supplies, graphics cards up to 380mm and CPU coolers up to 160mm. Also offers two external 5.25" drive bays as well as two 3.5 and two 2.5" internal drive bays for desired HDD/SDD configurations. The chassis comes equipped with a single quiet 120mm fan and all intake holes covered with dust-filters. Should additional airflow is required up to six 120mm fans in total can be installed. Regnum RG1 is also compatible with both single and dual radiator all-in-one watercooling solutions.

Following the recent launch of the Fortis 3 Malik Customs Edition we're also introducing the new generation our regular CPU cooler line up. The third istallment of Fera and Spartan coolers bring further quality and performance improvements while retainig the same, extremely affordable price points. The Fera 3 HE1224 brings quality and performance improvements over the predecessor while still providing the ultimate blend of compact dimensions, high efficiency and price. In other words the versatility that our customers praised so much.

Fera 3 HE1224 (TDP 180W) utilizes four Φ6mm high performance heatpipes that were rearranged for extra performance. Heatsink itself got slightly bigger and asymmetric without compromising Fera's main advantage - it's super-slim profile. To ensure the new Fera is as quiet as it is efficient we chose to pair it with the Sigma PRO 120 PWM-controlled fan. Optimized blade design significantly reduces noise while providing sufficient airflow for cooler to work even with high-TDP processors.

Performance meets style with the new Malik Customs Edition of Fortis 3 CPU Cooler - the fruit of collaboration between SilentiumPC and Malik, owner of Malik Customs, world renowned custom system builder and hardware photographer. Based on the regular model it offers unparalleled thermal capabilities coupled with new level of customizability and aesthetics. The heatsink is coated in dark nickel and it's complimented by interchangeable top plates. Four different color plates are included to match the cooler with most popular high-end components.

Fortis 3 HE1425 MCE is a large single tower type cooler with top tier performance at moderate price point. Engineered to achieve optimal balance between heat dissipation and airflow it uses five Φ6mm high performance heatpipes transferring heat efficiently to 38 aluminum fins. In terms of styling we decided to black-out the logos giving the cooler stealth and professional look.

SilentiumPC announced the Vero L1 600W power supply. It offers great value and solid performance for system integrators and budget-minded enthusiasts. With continuous power of 600W the unit is intended for single GPU gaming PCs. With dedicated single +12V rail delivering up to 49.6A and two PCI-E 6-pin and 8-pin cables you can power every modern graphics card available.

Vero's compact housing hides modern platform equipped with high-quality Taiwanese capacitors providing clean and stable power for your system. Five integrated safety features: OVP, SCP, OPP, SIP, UVP ensure safety for the PSU and the components. The unit is also future-proof with full compatibility with Intel Haswell C6/C7 modes and compliance with ErP Lot 2013 directive (< 0.5W in standby mode).

Following the success of the original Aquarius concept, SilentiumPC decided to present a bit smaller model, the new Aquarius M60W. This understated chassis is all about minimalism and build quality. Targeted at hi-end workstations or gaming PCs it's made from incredibly rigid 0.8 mm steel and features a large side window for showing off the components.

Like it's bigger sibling the Aquarius M60W also offers extensive support for both AIO and custom watercooling systems. Up to three radiators can be installed including a whopping 360 mm variant in the front. Simplified internal layout improves airflow and aesthetics of the complete system. Specially formed cover next to the motherboard tray instantly hides all the cables making cable management easier than ever. Another metal cover on the bottom separates the PSU and HDDs from the rest of the components.

SilentiumPC announced the Fortis 3 HE1425 CPU cooler. The third generation of Fortis CPU coolers from SilentiumPC raises the bar for price/performance even higher. Designed from scratch Fortis 3 HE1425 is a large single tower type cooler with top tier performance at moderate price point. Engineered to achieve optimal balance between heat dissipation and airflow it uses five 6 mm high performance heatpipes transferring heat efficiently to 38 aluminum fins. In terms of styling we decided to black-out the logos giving the cooler stealth and professional look.

Despite the overall size of the cooler we managed to ensure ultimate compatibility with other components. Most distinctive feature is an asymmetric heatsink design allowing to accommodate tall high-end RAM modules. Utilizing low-profile mounting screws and being only 158mm in height theFortis 3 HE1425 is one of the most compact coolers equipped with 140mm fan. That means it can be successfully fitted inside most PC cases on the market.

SilentiumPC rolled out a pair of premium mid-range power supplies (PSUs) for gaming PC builds, under the the Enduro FM1 Gold. Built with a design focus on low noise, the Enduro FM1 is characterized by a compact design, with a unit length of just 140 mm, giving you more room to deal with your cable-spaghetti. The unit measures 150 mm x 140 mm x 86 mm (WxDxH), and is cooled by a 120 mm fan, which stays off until a temperature or load threshold is reached.

The Enduro FM1 Gold comes in two models based on output - 550W and 650W. Both offer fully modular cabling. The 550W model offers two 6+2 pin PCIe power connectors, while the 650W model offers four. Both offer 24-pin ATX, 4+4 pin EPS, eight SATA power, and four Molex connectors. Under the hood, the two offer single +12V rail innards, with 80 Plus Gold efficiency, Active PFC, and modern electrical protection circuitry, such as OVP, UVP, OCP, OLP, and SCP. While SilentiumPC didn't disclose pricing, it's backing the two with 5-year warranties.

SilentiumPC announced the Gladius M20 Pure Black, a new high-value ATX mid-tower case. Made with SECC steel and ABS plastic, the case is built with a design focus on low-noise, although it doesn't offer any active noise dampening material. Fan vents are kept to a minimum, and covered with dust filters, the side-panel is opaque, and most cutouts are valved with rubber grommets, or dust filters.

Measuring 197 mm x 465 mm x 440 mm (WxDxH), and dry-weighing in at 4.45 kg, the Gladius M20 Pure Black, seats ATX, micro-ATX, and mini-ITX motherboards. It offers one each of 5.25-inch and 3.5-inch exposed drive bays, from which the 3.5-inch bay converts into two discrete 2.5-inch ones; and a drive-cage, which holds four 3.5-inch drives, in addition to a 2.5-inch one. The motherboard tray offers room for CPU coolers as tall as 158 mm, and add-on cards as long as 400 mm. Ventilation includes two 120 mm front intakes, and one 120 mm rear exhaust. Front panel features include a "smartphone tray," two USB 3.0 ports, and HDA audio jacks.