Ever since the introduction of the first Archon "Slim Tower Heatsink" back in 2010, Thermalright has never stopped improving on its own design. Incorporating our new proprietary Pressure Vault Bracket System we introduce to the world the all new Archon SB-E X2. Aside from a total overhaul and upgrade of the mounting bracket system, the Archon SB-E X2 will be using two TY-141 high efficient double ball bearing silent fans, giving enthusiasts the perfect mash-up of performance, compatibility and silence!

The new VX BTKII mounting system on the Archon SB-E X2 brings Thermalright's Pressure Vault Bracket system to all new heights, for the first time supporting CPU's from both AMD and Intel. The VX BTK II works on almost all modern motherboards. The bracket system only takes four simple steps to mount your heatsink. A simple turn of the Central Pressure Knob lets you adjust between 40 to 70 pounds of extra pressure. The nickel plated bracket adds not only flair to your system, but also extra longevity against oxidization and rust.

Thermalright is now preparing the release of the Archon SB-E X2, a CPU cooler 'optimized' for high TDP chips like Intel's Sandy Bridge-E models. Seen below, this new Archon measures 155 (L) x 106 (W) x 170 (H) mm and features a mirrored copper base, eight 6 mm heatpipes (with a sintered heatpipe design), and two TY-141 PWM fans working at 900 to 1,300 RPM (max sound output is 21 dBA).

The Archon SB-E X2 supports Intel LGA 2011/1366/1155/1156/775 and AMD Socket FM1/AM3+/AM3/AM2+/AM2/939 processors and is bundled with Chill Factor3 thermal paste. No word on pricing yet.

In 2012, with the introduction of low wattage CPUs also the change in the mainstream preferences towards smaller and minimalistic PC cases, we at Thermalright have also adjusted our lineup. Traditional 160 mm tower coolers may now have compatibility issues with mainstream cases. This is why we've designed the world's smallest 120 mm fan based cooler, the True Spirit 120M!

Built on the basis of Thermalright's successful True Spirit 120, the True Spirit 120M is Thermalright advancement towards Silence, Performance and Compatibility. Made specifically for Micro ATX users, the total height is only 145 mm, about 16% lower than the 160 mm Tower standards that Thermalright has set years ago. Along with a full sized 120 mm fan, the True Spirit 120M is the best companion for your slim case.

Thermalright is working on a massive new CPU heatsink, so massive, that it won't leave much room to strap a fan on. Pictured below, the new HR-22 is [intended to be] a passive CPU cooler with a large aluminum fin heat dissipation area, to which heat from the base is conveyed by eight 6 mm-thick nickel-plated copper heat pipes. Should you decide to use fans, with a rectangle fin profile, the cooler appears to allow you to strap 140~120 mm fans on its longer sides, and 80 mm fans on its shorter ones.

Thermalright is calling the HR-22 its next masterpiece. Said the company in its Facebook post, "Thermalright's signature model the HR-02, has turn the impossible to possible and shown the world the power of passive cooling. Now we introduce to you our next masterpiece, the HR-22." The new cooler is slated for 2013, we expect the company to use CES (early-January) as its launchpad.

Thermalright has this week introduced an updated version of its True Spirit 120 CPU cooler, the 'Rev. A (BW)'. Pictured below, the cooler features 48 aluminum fins, four 6 mm copper heatpipes and one 120 mm black/white fan operating at 600 to 1500 RPM (up to 28 dBA sound output), and it comes bundled with a mounting kit providing support for Intel LGA 775/1366/1156/1155/2011 and AMD AM2(+)/AM3( +)/FM1/FM2 processors.

The True Spirit 120 Rev. A (BW) can be found here priced at €25.99.

Over the month, Thermalright's gaming peripherals brand, Leetgion, released its first gaming mouse, Hellion, which it also claims to be the world's first "mechanical" gaming mouse. Perhaps they didn't find ball mice "mechanical" enough. The mechanical part Leetgion is referring to, is its switches. The Hellion uses a combination of Cherry MX Blue and OMRON Japan micro-switches. The main buttons apart from center are backed by OMRON switches, while a side "attack" macro button is backed by Cherry MX Blue.

Under the hood is an AVAGO 9500 laser sensor with a tracking resolution as high as 5,000 DPI. The non-primary buttons can be assigned macro functions, and macro profiles can be switched on the fly. Leetgion comes with three macro profiles optimized for Starcraft player classes. Measuring 123 x 73 x 42 mm (LxWxH), the Hellion has a fixed weight of 105 g. It uses a wired USB connection to the host, the cable is sleeved. The mouse also features a true-color LED illumination, a color can be chosen form a pallet of 16.7 million colors in the software. Find a review here.

Exposed earlier this month, Thermalright's Silver Arrow SB-E high-end CPU cooler has now become available in Europe, priced at 64.99 Euro (cheaper than it was suggested by the pre-order prices).

The Silver Arrow SB-E measures 130 x 170 x 170 mm, it weights 1124 grams, and features eight nickel-plated 6 mm copper heatpipes, two Double Ball Bearing fans - one 140 mm TY141 (900 - 1300 RPM) and one 150 mm TY150 (500 - 1100 RPM), and a universal mounting system providing support for Intel LGA 2011 / 1366 / 1156 / 1155 / 775 and AMD AM2(+) / AM3(+) / FM1 processors.

Thermalright's cooler can be found on sale here.

To finish off the week in style Thermalright announced the Silver Arrow SB-E, a new, high-end CPU cooler based on the Silver Arrow model introduced back in 2010.

The Silver Arrow SB-E features a dual tower/dual fan design and has eight (nickel-plated) 6 mm copper heatpipes (the old Arrow comes with four 8 mm pipes), a tweaked heatsink, two TY PWM fans - one 140 mm and one 150 mm (the SA packs two 140 mm spinners), and a mounting kit offering support for Intel LGA 2011 / 1366 / 1156 / 1155 / 775 and AMD AM2(+) / AM3(+) / FM1 processors.

The Silver Arrow SB-E also makes use of some more 'discrete' fan clips that won't interfere with taller memory modules. The cooler is expected to become available at the end of this month. No price tag was announced but we found it on pre-order at about $103 / 78 Euro.

As Intel's Core i7 "Sandy Bridge-E" processors in the LGA2011 package inch closer to their mid-November launch, there is already hectic activity among manufacturers of related components such as motherboards, memory, and coolers. By now, a large section of the industry has engineering samples to help design and test their components. OCWorkbench was witness to one such pre-release setup on which a Core i7 "Sandy Bridge-E" (unknown model, could even be quad-core for all we know), overclocked to 4.92 GHz with a "regular" air-cooler. The chip was idling at 45°C.

Sandy Bridge-E, as we know, can be effectively overclocked by increasing its base clock (BClk). On this particular setup, the BClk was set at 120 MHz, with a multiplier value of 41X, and core voltage of 1.51V. The memory used was DDR3-2400 MHz with CAS latency of 10T. This is particularly encouraging, not just to enthusiasts on a tight budget, but also the cooling products industry in general. Core i7 "Sandy Bridge-E" retail boxes don't contain a cooling solution, and Intel has been showing off its branded closed-loop water-cooling solution (to be purchased separately) as something that's "recommended" for Core i7 "Sandy Bridge-E". This gave many an impression that you need at least closed-loop water coolers for any hope of achieving decent overclocked speeds with these chips, and that perhaps these chips are bad overclockers in general. The likes of Xigmatek, Thermalright, Noctua, and Scythe can breathe a huge sigh of relief.

Air cooling specialist and pioneer of tower-type heatsinks, Thermalright, released a new revision of its Archon CPU cooler. Archon is a large tower-type heatsink that uses long aluminum fins. The heatsink measures 170 (H) x 155 (L) x 53 (W) mm. Such is the length of the fins that with this new revision, Thermalright decided to use a larger 150 mm fan, the Thermalright TY-150.

The TY-150 spins 500 to 1100 RPM, can be controlled using PWM, and has a noise output range of 19 to 23 dBA. The heatsink uses six 6 mm thick nickel plated copper heat pipes to convey heat evenly to the fin stack, in two rows of U-shaped pipes. The fins themselves are angled at spots to improve heat dissipation. The heat pipes converge at a mirrored copper base, but don't make direct contact with the CPU. The new Archon Rev. A is priced at €52.90.

Thermalright introduced its latest CPU cooler, the Archon. Building on the tower-design it pioneered, the Archon carries the sales tagline "make room for your memory", meaning that it's designed keeping in mind minimal intrusion of the motherboard's memory area. It did this by reducing the depth of the heatsink, while making up for it with length. The Archon makes use of a 140 mm fan for ventilation. The aluminum fins are not very planar, instead propagate in a zig-zag manner to increase air turbulence.

Six 6 mm thick nickel-plated copper heat pipes convey heat to the aluminum fins from the base, which are uniformly spread across the area. A Thermalright TY-140 fan is bundled, which spins at speeds between 900 and 1300 rpm, with noise levels of 19-21 dBA. A tube of Thermalright Chill Factor III thermal compound is also bundled. All current CPU socket types are supported, namely LGA1366, LGA1156, AM3/AM2(+) and LGA775. The company did not give out pricing and availability, yet.

Air-cooling specialist Thermalright is readying a VGA cooler that makes use of a 140 mm fan, and uses no less than eight 6 mm thick heat pipes to convey heat to a large aluminum fin array. The Shaman from Thermalright uses a large rectangular base from which eight heat pipes twist their way to the heatsink. Shaman supports nearly all high-end GPUs in the market, including GeForce GTX 480, GTX 470, GTX 465, GTX 460, Radeon HD 5800 series, Radeon HD 5700, and upcoming Radeon HD 6800 series as well as HD 6700 series. Bundled with this is a TY-140 fan, which spins between 900~1300 rpm, with a noise output of 21 dBA.A video preview of the Thermalright Shaman follows.

Thermalright released a black variant of the MUX-120 tower CPU cooler it released back in September 2009. The Thermalright MUX-120 Black uses nickel-plated black aluminum fins, along with a black-teal X-Silent 120 mm fan. Built on the same design as most tower coolers, the MUX-120 133 x 38 x 160 mm (L x W x H), weighing 670 g. It makes use of four heat pipes to convey heat from the copper convex base to the aluminum fin array. The fan spins at speeds of 600~1300 rpm, with noise levels of 17~25 dBA. The cooler supports sockets LGA1366, LGA1156, and LGA775. It is expected to be moderately priced.

Apart from the Silver Arrow dual-block tower CPU cooler, Thermalright is also readying a gargantuan single-block tower CPU cooler, the HR-02. Measuring 110 (L) x 140 (W) x 160 (H) mm, this cooler makes use of nickel plated copper heatpipes, aluminum fins, and tips the scales at 1.1 kg. Heat is conveyed to the 32 aluminum fins using six 6 mm thick heat pipes. The fins are punched in places to increase turbulence and area of dissipation. Although it doesn't ship with any fans, there are two sets of 120 mm and 140 mm fan retention clips included, along with a tube of Chill Factor III TIM. All current CPU sockets are supported. The HR-02 will reach stores soon.

Thermalright is readying a new CPU cooler modeled around the twin-block tower design that is getting some takers these days, the Silver Arrow. This cooler uses two aluminum fin blocks that dissipate heat from the CPU, with air circulated by two 140 mm TY-series fans. Heat is conveyed to the two blocks by four U-shaped 8 mm thick nickel-plated copper heat pipes. The fans spin at 500-1300 rpm, with noise-levels of up to 21 dBA. All current CPU sockets are supported, including LGA1366, LGA1156, AM3/AM2(+), and LGA775. Pricing is yet to be known.

Thermalright is ready with a Black variant of its Venomous X CPU cooler. It uses essentially the same materials as the standard model, except for its black nickel-plating, which makes it suit aesthetics of certain builds. It uses Thermalright's standard tower design, with six heatpipes. It has provision to hold a 140 mm fan on either side. The unit measures 127 x 63 x 160 mm, weighing 755 g. It supports all current sockets, including LGA1366, LGA1156, AM3/AM2(+), and LGA775. The Venomous X comes with a tube of Chill Factor III TIM bundled. It will be priced around the 55 EUR mark.

Thermalright is said to be working on a bolt-through kit (BTK), the GF 100 VGA BTK, that lets popular existing VGA heatsinks by the company to support the NVIDIA GF100 GPU, on GeForce GTX 480 and GeForce GTX 470 graphics cards. The Thermalright Spitfire, HR-03 GT and HR-03 GTX heatsinks will be able to make use of the new BTK. The company is also said to be working on two new VRM heatsinks that are tailor-made for the reference PCBs of the two cards, the VRM GTX 480, and VRM GTX 470. These allow existing users of the above three heatsinks, and people looking to buy them some future-proofing. The GF 100 VGA BTK, VRM GTX 480 and VRM GTX 470 will be released in the weeks to come.

A couple of months after releasing the VRM-R3 and VRM-R4 VRM heatsinks for the ATI Radeon HD 5800 series graphics cards, Thermalright is back with yet another HD 5800 series VRM heatsink, the VRM-R5. The new heatsink offers passive or fan-assisted cooling dedicated the the graphics card's VRM chips - major heat-producing components next to the GPU and memory chips. Cooler VRM chips could mean better electrical stability, affecting overclocking headroom.

The VRM-R5 makes the main block portion of the heatsink elaborate, with complex, branched metal ridges. From here two 6 mm aluminum heat pipes conduct heat to a block of aluminum fins. The fins are punched to improve heat dissipation. An 80 mm fan can be attached to this block for active cooling. The heatsink measures 118 x 117 x 122 mm, and weighs 140 g. The heatsink is compatible with some VGA coolers by Thermalright, notably Spitfire. It will reach stores next week at a price of 23 EUR.

Closely following up the launch of its SpitFire VGA Cooler, air-cooling specialist Thermalright introduced the VRM-R4 and VRM-R3 graphics card VRM heatsinks designed for AMD Radeon HD 5800 series graphics cards. In many ways, these two heatsinks resemble the VRM-R1 and VRM-R2, which the company introduced back in July, for the Radeon HD 4800 series accelerators.

The new VRM-R3 and VRM-R4 measure 122 x 85 x 99 mm and 133 x 53 x 127 mm (LxWxH), respectively, and consist of baseplates that double up as small heatsinks, from which, two 6 mm heatpipes convey heat to an aluminum fin array big enough to mount 80 mm fans. For the VRM-R3, this fin array propagates perpendicular to the plane of the motherboard, while for the VRM-R4, is goes along the plane. Like their predecessors, the two should be compatible with popular Thermalright GPU coolers such as HR-03 Rev.A, HR-03 GT, HR-03 GT V2, T-Rad2, and T-Rad2 GTX. Pricing isn't known as yet.

Heatsinks specialist Thermalright released to the market its Spitfire VGA heatsink. This 147 (L) x 123 (W) x 154 (H) mm, 550 g heatsink comes with a unique angled design. A GPU contact base made of nickel-plated copper forms the starting point for six sintered nickel-plated heat-pipes, which then propagate perpendicular to the plane of the video-card, typically passing over other expansion cards in the system. The heatsink can then provide silent passive cooling, or active cooling, by latching on 140 mm or 120 mm fans (fans not included in the package, fan-clips are).

The package includes three types of heatsinks for the memory chips and VRM, all necessary retention mechanisms, including thumb-screws for tool-free installation. A syringe of the Chill Factor TIM is also included. The cooler is compatible with most modern GPUs, including GeForce 7, 8 (excluding G80-based ones), 9 series (single GPU), Radeon HD 3800 series, HD 4800 series, and HD 5800 series. There is no support for GT200-based GeForce GTX 200 series. Pricing and availability are yet to be known.

Cogage is ready with a new massive CPU air-cooler with the Cogage Arrow. The Arrow is a slightly redesigned Thermalright IFX-14. The redesigning done here is for the shape of the aluminum fins, which have pointed edges. Perhaps that's where its name was coined on. The construction involves a CPU contact block from which pass four 8 mm heat-pipes. These heat-pipes pass through two independent aluminum fin blocks. Each of these is capable of holding 120 mm fans on either sides, including space to hold a 140 mm fan in the central gap. The heat-pipes are made of nickel-plated copper. It is expected to reach stores soon, probably priced similar to the IFX-14, which is US $60~$70.

Thermalright today rolled out its mid-range CPU cooler offering exclusive to Intel's newest socket, LGA-1156. The Thermalright MUX-120, like most other coolers from the firm sports the trademark tower design consisting on a CPU block from which arise four 6 mm heatpipes, conveying heat to an aluminum fin array with 48 fins. The heatsink part measures 133 x 38 x 160 mm (L x W x H), and weighs 670 g (1.47 lbs). Bundled with it are Thermalright's X-Silent 120 mm fan (1200 rpm, 23.5 dBA max, and 41.8 CFM), a tube of ChillFactor 2 thermal compound, and the necessary retention parts. At the moment the cooler only supports LGA-1156, though it is believed that a future version of the MUX-120 will include support for other sockets. Although pricing isn't announced, a competitive one is expected to be set.

Thermalright's iconic Ultra 120 Extreme (TRUE) CPU cooler has a new revision. TRUE Rev. B brings along a small design change that the company claims improves its cooling performance a little. Most of its 52 aluminum fins barring the top one have a 'V'-shaped cutting in the center. This perhaps increases turbulence (for better heat dissipation) a little. The resulting temperature drops are estimated around 1~2 °C. TRUE Rev. B has started selling in China for RMB 530 (which is around $79), including fan. Without the fan, $72.95 is all it takes.

Thermalright is readying a couple of VRM area coolers for the AMD reference design ATI Radeon HD 4870 and Radeon HD 4890 graphics accelerators. The Thermalright VRM-R1 and VRM-R2 work in conjunction with the company's T-Rad series GPU coolers, and strive to provide a high level of cooling that allows better overclocking.

The cooler consists of an a heatsink that covers the VRM area of the accelerator. From this heatsink arise two nickel-plated copper heatpipes that convey heat to a small but dense aluminum fin block. This block is big enough to let you latch an 80 mm fan onto it for active cooling. Both VRM-R1 and VRM-R2 are essentially similar in size and shape of the components, except for that the two differ in the positioning of the aluminum fin block. For VRM-R1, the block propagates perpendicular to the plane of the motherboard, while that of the VRM-R2 propagates parallel to the plane. Both coolers weigh 160 g. They are compatible with most Thermalright GPU coolers, namely HR-03 Rev.A, HR-03 GT, HR-03 GT V2, T-Rad2, and T-Rad2 GTX. They will hit stores very soon.

Thermalright is getting ready to release new and improved version of T-Rad 2, under the name T-Rad 2 GTX. The overall cooler dimensions are L228 x W140 x H25 mm and its weight is just over 360 gram, there are six nickel-plated heatpipes and a cooling surface that gives the option to install two 92 mm fans or a big 120 mm fan. The T-Rad 2 GTX is compatible with NVIDIA GeForce 8800 GTS (G92), 8800 GT, 9800 GTX, GTS 250, GTX 280, and AMD Radeon HD 2600, HD 2900, HD 3870, HD 4850, HD 4890 cards, where the older version was compatible only with NVIDIA 9800/8800 series and ATI HD3850/3870/4850/4870 cards. With the cooler Thermalright supplies the Chill Factor thermal compound. Optional accessories which include TR-FDB fans and a dual heatpipe cooling for ATI Radeon HD4870/4890 VRM area are also available from Thermalright. The cooler's pricing is not yet confirmed, but it might be priced at around 40 Euro.