Settings

This mouse has no driver software, which means the settings cannot be changed through your computer. There are but two buttons and an LCD panel at the bottom of the mouse, where you can fiddle around with the basic settings. The button on the left controls the CPI settings, while the one on the right can set the polling rate, angle snapping, and lift-off distance.

You can cycle through the CPI steps by simply pressing the left button. There are six predefined CPI levels, which you can change as you like by pressing and holding down the left button for at least 3 seconds. Then, your selected CPI profile will start flashing and you can change the value in steps of 50 CPI by pressing the side buttons. Once your option is set, you simply press the left button again and your profile is saved.

In order to switch between the polling rate, lift-off distance, and angle snapping settings, you have to press and hold the right button for 3 seconds. Then, you can cycle between the given settings by pressing the right button.

Lighting

There are 14 different lighting modes available, including the option to turn the lighting off. These can be changed by pressing the button on the top of the mouse, behind the scroll wheel. There is no option to change the predefined settings unfortunately. The lighting is bright, and transitions look nice and smooth in real life.

I made a video in order to demonstrate these effects: