Write Intensive Usage

When copying games from your Steam Library or other very large files (>10 GB), you might have noticed that write speeds on your SSD start out at full speed and then drop considerably. The underlying reason is that modern drives have caches that soak up write bursts to improve performance. In the fairly uncommon scenario of writing data that's too big to fit into these caches, the drive will have to write data directly to flash, and it will probably juggle some out of its write cache at the same time, which can result in a significant loss of write speed. Newer TLC drives use part of their capacity in SLC mode for increased performance. This test can reveal the size of that SLC cache.

Testing on this page looks at exactly that scenario. We write a sequential stream of 1 MB blocks to the drive in a single thread, like a typical file-copy operation would do, and measure write speeds twice a second. The drive is fully erased before testing to ensure any caches are emptied. Please note that this test writes a lot of data in a very short time, which is something most consumers will never do.


Write speed starts out at 4 GB/s and is sustained until 113 GB have been written to the drive. At this point, the SLC cache is full, and the drive will start flushing SLC back to TLC, which significantly affects write rates. You're still getting 1.5 GB/s in this state, which is better than most other TLC drives. What's a bit surprising is that the fuller the drive gets, the higher the write speed. Any pause in write activity, even for a second, will give the drive time to free up some SLC cache, so full write rates are restored after some idle time even if the drive is partially filled.

On average, we saw a write speed of 1.9 GB/s when filling the whole disk, which is the best result of any TLC-based SSD we've ever tested. It's still 300 MB/s lower than what last-generation's Samsung 970 Pro offered because of its use of MLC flash.