Monday, February 20th 2023

EK Announces ROG Strix Z790-I Mini-ITX Quantum Monoblock

EK, the premium PC liquid cooling gear manufacturer, is launching the EK-Quantum Momentum² Strix Z790-I Gaming D-RGB - Plexi, the latest Intel LGA 1700 socket-based monoblock. The new Quantum line monoblock is engineered specifically for the ASUS ROG STRIX Z790-I GAMING motherboard. The addressable D-RGB LED in this monoblock is compatible with ASUS Aura Sync RGB control, offering complete lighting customization for every single diode at any given time. This Momentum² monoblock is also EK-Matrix7 compatible and doesn't require removing the factory-mounted heatsink before installation.

This is a complete, all-in-one (CPU + motherboard) liquid cooling solution for 12th and 13th gen Intel Core processors, compatible with LGA 1700-socket ROG Strix ZZ90-I Gaming ITX motherboard. This water block directly cools the Intel 1700 socket-type CPU and the heatsink of the power regulation (MOSFET) module. It doesn't replace the stock heatsink but instead complements it. It connects with the preinstalled heatsink through thermal pads between them and cools the heatsink instead of directly cooling the VRM.
The main issue with mini-ITX boards' VRM is usually the lack of space to fit a larger heatsink. Even with high-quality VRM, small heatsinks have limited surfaces for thermal dissipation. During EK's testing phase, this monoblock lowered the temperature of the VRM by more than 20°C on an open test bench. Inside a case, and especially in a small form factor (SFF) case, where other components raise the ambient temperature, users can expect even more significant improvements in thermals when using this Momentum² monoblock.

The new monoblock uses the latest generation of EK Velocity² cooling engine to ensure the best possible CPU cooling without reducing the flow to other components. This water block directly cools the Alder Lake or Raptor Lake CPU, with the coolant passing over the monoblock parts that touch the factory-mounted heatsink, dissipating heat away. Liquid flows directly over all critical areas, providing enthusiasts with an excellent cooling solution for high and stable overclocks.

Like all other EK monoblocks, the EK-Quantum Momentum² ROG Strix Z790-I Gaming features a high-flow design and can be easily used in systems with weaker water pumps or operate at lower pump speed settings. This latest Quantum Momentum² monoblock also comes with sophisticated D-RGB (addressable) lighting with a total of 6 LEDs. They connect to the ROG Strix motherboard's standard 3-pin 5V D-RGB addressable header called the "Aura Gen2 header."This product is compatible with ASUS Aura Sync RGB control software. The arrow marking on the 3-pin D-RGB LED connector should be aligned with the +5V marking on the AURA Addressable Gen2 header.

The base of the monoblock is made of nickel-plated electrolytic copper, while the top part is made of quality cast acrylic material. The nickel-plated brass screw-in standoffs are pre-installed and allow for easy installation.
Add your own comment

10 Comments on EK Announces ROG Strix Z790-I Mini-ITX Quantum Monoblock

#1
Chomiq
Mixed metal corrosion included as a free bonus.
Posted on Reply
#2
v1_deluxe
ChomiqMixed metal corrosion included as a free bonus.
Nickel + copper is fine, alu + copper is not.
Posted on Reply
#3
Chomiq
v1_deluxeNickel + copper is fine, alu + copper is not.
Last incident has shown that what they say isn't always what they do.
Posted on Reply
#4
v1_deluxe
ChomiqLast incident has shown that what they say isn't always what they do.
Ouch, missed that one,. Ek, you know better
Posted on Reply
#5
Dammeron
ChomiqLast incident has shown that what they say isn't always what they do.
How much of that is EK's fault and how much Asus's, we don't know. However, looking at the technology the block was made in (cut alloy base + soldered copper fins) I don't think EK made that one - wouldn't make sense with all those CNC machines they own.

Still, slapping their logo on a botched solution doesn't help them either and some blame lies with them.
Posted on Reply
#6
Chrispy_
DammeronHow much of that is EK's fault and how much Asus's, we don't know. However, looking at the technology the block was made in (cut alloy base + soldered copper fins) I don't think EK made that one - wouldn't make sense with all those CNC machines they own.

Still, slapping their logo on a botched solution doesn't help them either and some blame lies with them.
Until one of them accepts full fault, both companies are tarred and feathered for watercooling.
Posted on Reply
#7
deu
Damn it could look sick with a custom ITX case fully optimized for the board, SFX and a 4080. too on water (hence the custom case potentially with a build-in radiator.)
Posted on Reply
#8
Voodoo Rufus
The proof of the performance will be VRM temps, but it strikes me as a little lazy to not replace the heat sinks completely and go with the block on the fets.
Posted on Reply
Nov 21st, 2024 11:45 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts