SilverStone made an addition to its Precision line of noise-optimized cases, the PS09. This micro-ATX case measures 170 mm x 359.8 mm x 406.6 mm (WxHxD), dry-weighing about 3.34 kg, and made of steel and plastic. Its panels feature noise-dampening foam padding. Internally, the PS09 has room for standard micro-ATX motherboards and mini-ITX motherboards, the motherboard tray features cutouts for CPU cooler and cable management. There's room for add-on cards 35.8 cm long, and CPU coolers 14 cm tall. It features a top-oriented PSU bay. Drive bays includes a couple of 5.25-inchers, four 3.5-inchers, and a 2.5-incher. Ventilation includes just the 120 mm front intake, and 80 mm rear exhaust. SilverStone didn't reveal pricing.

Xigmatek announced availability of its Nebula cubical mini-ITX chassis. Unlike other monolithic cubical cases with bluntly rounded edges, the Nebula features a few interesting design bits. You'll find the case seated on a chrome bottom-tier, and an equally suspended top-tier. The black panels feature a piano-black finish. One of its edges is sliced into with the case's power LED glowing in amber/orange. Front panel connectivity includes a pair of USB 3.0 ports (standard header) and HDA front-panel jacks.

Under the hood, the Xigmatek Nebula features room for a normal-sized mini-ITX motherboard, with room for up to 200 mm long dual-slot graphics cards (an ASUS DirectCU Mini will make it). There's also room for CPU coolers that are up to 80 mm tall. Its storage area has room for two 3.5/2.5-inch drives, with no optical drive slots on offer. There's room for a standard ATX/EPS power supply. The case passively draws in air from bottom vents, a 120 mm Xigmatek XOF PWM-controlled fan pushes hot air out from the rear.

Lian-Li Industrial Co. Ltd today releases the PC-D600 double wide brushed aluminum chassis that was previously announced at COMPUTEX 2013. Supporting EATX, ATX and Micro-ATX motherboards, the PC-D600 with 2mm thick aluminum panels has a two compartment design, supports water cooling setups, and has numerous tool-less features to give absolute freedom to enthusiasts and modders to build a high end system. Separating the internal components into two compartments, the PC-D600 allows DIY enthusiasts to show off high end and intricate setups through the side panel window, while giving plenty of room for the wires and less eye-catching components on the other side of the motherboard tray. Not only does the two compartment design allow enthusiasts to show off their builds, it also allows uninterrupted airflow across the heat generating components.

Aerocool Advanced Technologies, one of world's leading manufacturers of excellent gaming PC gear, officially announces the birth of a brand-new product series! Having several great and successful product series for Gamers on the market, Aerocool moves forward to enter the emerging HTPC and Gaming Cube market, by launching the first product of the new "Dead Silent" (DS) Series. Clearly, much market experience and enthusiasm has been invested, in order to create the DS-Cube, which comes with an astonishingly elegant design on the outside and vast possibilities and options for enthusiastic HTPC users and ambitious Gamers on the inside - out of the box!
Tony Lin, CEO of Aerocool Advanced Technologies stated: "Aerocool successfully developed the Gaming PC Chassis market and is now ready to further expand by innovating the small-factor Gaming-Cube market. Our new DS-Cube combines pure elegance with vast features and best usability."

Today, BitFenix is proud to officially announce Phenom, the newest creation from the BitFenix Design Lab. Featuring clean, uncluttered styling and tremendous build flexibility, Phenom represents the perfect marriage of advanced functionality with next-level SFF design for a case that's sure to be an instant classic.

Engineered to be a sleek modern cube design that suits any environment, fans of clean and elegant chassis are going to feel right at home with Phenom. The mesh accents along the sides of the case perfectly complement the smooth surfaces of the SofTouch-coated top and front panels. In the center is a highly-polished BitFenix logo that contrasts the subtle matte contours perfectly, creating a design that is ideal for any modern décor. And because different systems have different requirements, Phenom comes in both mini-ITX and micro-ATX variants to meet the needs of an even larger group of users.

In addition to revealing the Pangu, DeepCool has this week introduced a second mid-tower PC case, a model called Tesseract. Set to arrive in black and white versions, the chassis measures 472 x 210 x 454 mm, it weighs 5.1 kg, and features a mesh front panel, top-placed audio and USB (one USB 3.0, one USB 2.0) ports, seven PCI slots, and support for ATX and micro-ATX motherboards, and for graphics cards up to 305 mm in length.

The Tesseract offers three 5.25-inch bays, three 2.5-inch, and four 3.5-inch drive trays and comes equipped with two 120 mm fans - one with LEDs in front, and one light-free at the rear. For extra cooling, there's the option to install an extra four 120 mm fans - two on the top panel and two on the side. No word yet on pricing.

Lian-Li Industrial Co. Ltd today releases a new brushed aluminum mid tower chassis with side mounted radiator support, PC-10N, in North America. Besides allowing for a 240mm radiator to be placed on a hinged bracket, the PC-10N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management. A hinged bracket directly across the CPU allows DIY builders to install a 240mm radiator in the PC-10N. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components.

Sonnet today announced the Echo Express SE II, the replacement for the highly successful Echo Express II Thunderbolt-to-PCIe expansion chassis. The new model adds enhanced capabilities and sells at a lower price, and also includes a coupon for a free upgrade to exchange to Thunderbolt 2 when it becomes available this fall.

The new two-slot Thunderbolt 2-to-PCIe expansion chassis enables the use of a wide variety of high-performance PCI Express (PCIe) cards - originally designed for use in desktop computers - with any Mac computer with a Thunderbolt port. Accommodating cards up to 7.75 inches long, the Echo Express SE II supports nearly every Thunderbolt-compatible PCIe card on the market, including double-width cards (PCIe card plus daughter card).

Aerocool Advanced Technologies, one of world's leading manufacturers of excellent gaming PC gear, is officially announcing the first PC chassis of the GT series. The GT-S Super-Tower aims for Gamers and power users, who are looking for a chassis with vast space for latest gears, excellent features and remarkable design.

Aerocool designed the GT-S chassis to surpass common standards and push it a bit further! Mainframe of the chassis is made of especially robust 1,2 mm thick SEEC steel, to provide excellent stability. Furthermore, due to the overall dimensions of 255 x 640 x 560 mm (WxHxD), Aerocool considered to call the GT-S a Super-Tower. Users, who are not willing to make compromises, will especially like the new chassis! Various features are implemented on the outside, such as the built-in fan controller for up to seven fans, cooling optimized airflow outlets on top-panel as well as a magnetic front cover, which can be moved variably or even removed completely. It is available as a black version with red illuminated case fans and white version with blue illuminated case fans. It surprises with a futuristic design on the outside, and superb space for high-end components on the inside. Thanks to the built-in window in the side-panel, a great view on the built-in hardware is guaranteed.

Cooler Master, a leading creator, innovator and manufacturer of desktop components and more, today officially unveils to the world the first stackable "modtower" -- The HAF Stacker series. This evolutionary computer case is the first of its kind to provide new levels of modularity, expandability, and creativity for system builders around the world. The HAF Stacker series is currently on display for the very first time at the Cooler Master Booth#3446 at PAX Prime 2013 in Seattle, WA.

Series Convergence
Joining together two titans among Cooler Master case series, HAF Stacker takes the essence of the widely popular High Air Flow and Stacker series and elevates them to new heights as a single, cohesive line. The large drive storage and interior space of the Stacker series meets the Water and Air cooling design of the HAF series. The result is the first modular and expandable full tower with smaller companion cases that all stack together seamlessly.

Cooler Master, a leading creator, innovator and manufacturer of desktop components and more, today announced the brand new Elite 130 M-ITX chassis. The Elite 130 improves upon the popular Elite 120 and brings about even more value added features. It does so while keeping an elegant, yet demure exterior.

Small, Yet Powerful
Elite 130 is among the most compact, yet fully featured chassis for high performance M-ITX computing. Included is a large mesh front panel that offers reserved styling while allowing extreme airflow. Elite 130 is designed to fit in the most minute available desk space while supporting high performance hardware. A pleasing, clean exterior design conceals the true performance parts contained within the Elite 130.

Lian-Li Industrial Co. Ltd today announces the release of a new brushed aluminum full tower chassis with a versatile cooling design and removable motherboard tray - PC-A79 - in North America. Capable of supporting HPTX, E-ATX, XL-ATX, ATX, and Micro-ATX motherboards, this fully aluminum full tower easily contains the latest high-end components, while keeping these components at optimal operating temperatures with its versatile and effective cooling design.

The PC-A79 gives DIY builders several cooling options for a variety of system setups. For the front intake, the three HDD cages have 120mm fans mounted to them. These cages can be set up so that the fans are either towards the front of the case or behind the cage. A dust filter on each on the individual 5.25" front bezels prevents dust from coming in, no matter the setup.

Lian-Li Industrial Co. Ltd today announces a new slim brushed aluminum M-ATX chassis with side mounted radiator support, PC-V360. While having a small and slim profile, the PC-V360 allows DIY builders to assemble an enthusiast level system with support for AIO liquid cooling systems. A hinged bracket directly across the CPU allows DIY builders to install a 240mm radiator in the PC-V360. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components. The bracket can also be removed for fan/radiator mounting as well as taken off completely if not being used.

After introducing the Silencio 450 last year, it is time to introduce a very special new member of the Silencio-family, the Silencio 352. This case is the first silent mATX case from Cooler Master with a foam lined front door and foam lined side panels which will take care of damping all the sounds being produced inside the case.

Silent Computing
Representing the best solution for sound absorption with system builds of all levels, the Silencio Series delivers ultimate performance with minimal noise. Sound silencing foam padding seeks to severely reduce system noises produced by hard drives, numerous cooling fans, and other devices. Combine this with a solid-steel frame, vibration inhibiting rubber feet, two Cooler Master XtraFlo fans and the Silencio 352 severely reduces noise output. Those that value a quiet computing space will immensely appreciate the new microATX and Mini-ITX supporting Silencio 352.

Enermax presents the new iVektor series chassis, designed for high-performance cooling of strong gaming rigs and workstations. iVektor is a multi-functional ATX midi tower offering maximum usability and expandability. The racy design allows for an eye-catching presentation of customized gaming rigs. By integrating LED stripes or fans, the dark-tinted acrylic side window reveals what's under the hood of the iVektor. The case comes in three colors, jet black, passion red and snow-white.

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum mid tower chassis with side mounted radiator support, PC-10N. Besides allowing for a 240 mm radiator to be placed on a hinged bracket, the PC-10N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management.

Side Mounted 240 mm Radiator Support
A hinged bracket directly across the CPU allows DIY builders to install a 240 mm radiator in the PC-10N. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components.

Phanteks are very well known for their high-end cooling solutions, the Dutch design team created some of the best on the market but today we see the debut of their new ATX case the Enthoo Primo. The case sets accessibility and functionality levels of its own.

Dutch designers at Phanteks have created some of the best and most efficient coolers on the market today, well known for their unique looks and colour schemes. Today Phanteks debut their new case to the world, the Enthoo Primo - a case that sets a level of it's own and it's really a monster. When you are dealing with a company that specifically design coolers, you know the capability in a case will be above and beyond. The case has clean and elegant style, refined with aluminium front and top panels along with controllable LED lighting. The stealth interior covers the PSU, HDD and cables along with grommets (modular cable cover) for the most clean and sleek looking system.

Cubitek Co., Ltd. is pleased to announce a completely aluminum, silent Mini-ITX chassis with minimalistic aesthetics - the Mini Center. Its minimalistic styling, compact size and passive cooling, make the Mini Center an unobtrusive addition for any nook or cranny in the living room as an HTPC or as an elegant office PC.

Anidees have announced their latest chassis AI-4 dedicated for Mini-ITX and Micro-ATX motherboards. Despite this, case is compatible multiple equipment and can give you a lot more than you expect at first sight. If some of you remember previous model AI-6, you can see similar design of AI-4 case which is also finished with brushed aluminum on the top and front panels. Front door can be hinged right or left to the users preference.

The top I/O panel includes high speed USB 3.0 (2x), USB 2.0 (2x) and audio input/output for more comfortable connectivity. Like any great case, cable management areas are present including cable chips to keep cables tidy. A three speed fan controller situated alongside the I/O input gives dynamic cooling and sound potentials. Three Nano tech fans, 2x 120mm in the front and 1x 120mm is already included with the system which have an ultra long lifetime. The case has space 4x 3.5" or 2.5" devices, up to 340mm graphics cards and 168mm CPU coolers, so this will ensure you can get great cooling and a powerful graphics card inside the system. Anti-vibration rubber for the fans, HDD and removable dust filter in the front - this all can also be found on the AI-4.

Known for its signature clean yet modern designs, premier PC hardware designer BitFenix is proud to reveal its latest ATX chassis creation - Ronin. Featuring enhanced cooling capabilities, DIY-friendly features, unique styling, and legendary BitFenix quality, Ronin represents a next-level chassis design that shows your opponents no mercy.

Modern, stylish, and clean, with a menacing all-black finish, Ronin is the epitome of BitFenix design. The top and front panels, coated in BitFenix SofTouch Surface Treatment for excellent stain resistance and quality feel, are bordered by micro-mesh strips that not only perfectly compliment the matte black exterior, but also act as additional ventilation.

First surfaced in March, Akasa's Gelileo concept made headlines with its unique approach to passive CPU cooling in silent HTPCs. The case uses a little over a third of its body as a discrete aluminum fin heatsink that's partitioned from the rest of the case, and draws heat from the CPU over heat pipes. In its main compartment, there's enough room for a thin mini-ITX system. This approach could me more efficient compared to cases in which the entire body doubles up as a heatsink, because heat is nucleated and dissipated, rather than being convected all over the case. The case comes with VESA mounts, and ships with a 120W or 180W external power brick. Made of aluminum, the Galileo will be available in brushed-metal trims of black and silver.

In 2010, NZXT introduced the industry to its Phantom chassis, an aggressively designed, feature-rich case for mainstream users, gamers and enthusiasts alike. Now, NZXT is finally ready to unveil its direct successor, the Phantom 530.

Continuing the legacy of the original, the new Phantom was meticulously designed from the ground up resulting in a refreshing new design that is uncompromising in every way. While creating the Phantom 530, the NZXT design team painstakingly took every beloved aspect of the original and made it even better.
With up to 70% more cable management space, more airflow and even more liquid cooling support, the Phantom 530 features phenomenal support for even the most extreme performance builds.

Classic design. Minimal hassle. The new H230 is the perfect silent chassis for anyone looking for all of the essentials at an unbeatable price point.
Continuing the legacy of the H series, the H230 brings similar sound crushing abilities as its predecessors into a smaller, more accessible package for all. With an enclosed, minimalistic design, the H230 is every bit as functional as it is sleek.

Complete with a tool-free 5.25" drive latch design, removable HDD cage, seven motherboard expansion slots and top accessible USB 3.0 connectivity, the H230 brings together all of the essentials for a hassle-free build with a minimalistic edge.

Lian-Li Industrial Co. Ltd is pleased to announce their newest edition to the briefcase chassis "TU" series - PC-TU100 Mini-ITX Chassis. More compact than the PC-TU200, the fully aluminum PC-TU100 is the ideal choice for the ultimate LAN rig with its top-mounted handle and its support for the latest powerful low profile graphics card. The stylish retro "007-esque" design of the chassis is sure to garner much attention.

With dimensions of (WxHxD) 158 x 275 x 242 mm (6.2" x 10.8" x 9.5") and a weight of 1.77 kg (3.9 lb), the PC-TU100 holds the hardware necessary for a portable gaming system while being primed and ready for transport. Two 2.5" hard drives or SSDs can be mounted on the bottom drive rack. An additional 2.5" drive can be placed in the slim optical drive bay, if no optical drive is installed. Graphics cards up to 190 mm can be installed in the chassis - enough room for some of the latest small form factor graphics cards. The PC-TU100 supports SFX power supplies up to 170 mm.

Taiwan based manufacturer Aerocool expands its quality PC-Chassis portfolio. New addition to the portfolio is the Strike-X Xtreme Midi Tower, which is targeting ambitious Gamers and combines stylish exterior with spacious and clean interior.

The interior design is offering much space for drives and latest high-end gaming components. Users can conveniently access the four 5,25 inch (13,34 cm) bays, which are equipped with a tool-free mounting mechanism. Additionally up to six 3,5inch (8,89 cm) respectively 2,5 inch (6,35 cm) hard drives can be mounted into the allocated slots conveniently using the supplied HDD trays.