Installation

Installation of the CORSAIR Hydro XD5 pump/reservoir combo begins by perusing the list of compatible coolants in the compatibility section of the product page. Once you have a coolant of choice, and no doubt CORSAIR would prefer you use their branded coolant, you have to decide whether you are going with a standalone installation to your case or a dedicated panel, or the more user-friendly approach of using 120 or 140 mm fan-hole solutions. For the former, it is as simple as drilling holes into your case or panel and using the rubber-lined screw feet and provided screws and washers. You can also use the accompanying installation accessory for cable management and a place to route the pump for a "floating" application.

The accessory paired with the provided fan-mounting metal brackets is arguably what you may want to do instead, and the included manual does a good job of going over how the setup works. Simply put, you can use the rubber-lined feet and provided installation hardware to secure the XD5 to a bracket of your choice with the accessory, and the bracket then has holes that line up with the appropriately sized case/radiator/fans. The choice of nylon and medium-height reservoir means the unit is not very heavy, which allows for a stable installation without worrying about it pulling something down. Connect the LED and pump cables to the controllers and you are ready to plumb in tubing and the various fittings for the XD5.

Lighting

Here's the light show that greets you when the LED cable is connected and powered on. It is a rainbow wave lighting effect that does a good job of showcasing the individually addressable nature of the 10 RGB LEDs, and we can also see how and where the light moves through the top, and downward into the reservoir body.


I will go over iCUE as it pertains to the Hydro X series in the final build article, but it works as expected provided you let the driver know what is connected exactly. I used a Lighting Node PRO, which has two channels, and a drop-down list allows for the Hydro XD5 pump/reservoir combo to be chosen. I did not have anything connected to the pass-through cable, which was thus left blank, and an on-screen render nicely visualizes the various lighting effects that are immediately adopted by the block.


Here is a look at some of the various lighting options, be it static or dynamic. I was impressed with the fairly true to color white these LEDs were able to reproduce, and the downward-facing LEDs are bright enough to illuminate the entirety of the nylon reservoir. However, there is no denying that the lighting is brightest at the top and dimmer the further towards the pump you go. CORSAIR recommends using a clear coolant to help diffuse the light from the LEDs better than what you see above, with the actual LEDs allowing for the color customization instead of using colored coolant. As with anything compatible with iCUE, lighting can be configured to match other products collectively.