Tuesday, October 8th 2013

AMD Releases the Catalyst 13.11 Beta Driver

by
Cristian_25H
 Discuss (24 Comments)
If with great power comes great responsibility then definitely with new graphics cards come brand new drivers. Enter the AMD Radeon R9 and R7 Series cards and the first (publicly-available) driver to support them, the Catalyst 13.11. Still in beta mode, this fresh Catalyst works with the Radeon R9 280X, R9 270X, R7 260X, R7 250 and R7 240, as well as the Radeon HD 7000, HD 6000 and HD 5000 Series cards.

The Catalyst 13.11 Beta (V1) is supposed to feature some fixes, plus improvements for Battlefield 4 as well as for TESV: Skyrim and Total War: Rome 2. To download the driver just click on the links below.

Related News

Add your own comment

24 Comments on AMD Releases the Catalyst 13.11 Beta Driver

#1
manofthem
WCG-TPU Team All-Star!
Will love to try; figures they come out today right after a reinstall last night.

I bet erocker's happy, he's been looking and asking for these all day ;)
Posted on Reply
#5
Slomo4shO
Cristian_25Hwith re-branded graphics cards come beta drivers
This sounds about right...
Posted on Reply
#6
noctuanhd14
These drivers improved Minecraft performance on my nehpew's AMD APU build. Not even sure if I am supposed to download drivers for APU's but I do on his just to check, it seems to help so I don't know. :toast:
Posted on Reply
#7
Ikaruga
noctuanhd14These drivers improved Minecraft performance on my nehpew's AMD APU build. Not even sure if I am supposed to download drivers for APU's but I do on his just to check, it seems to help so I don't know. :toast:
How do you measure MC performance that accurate? Sometimes a simple restart is enough to get different fps values on the very same spot (or you mean it's like +15fps?).
Posted on Reply
#8
bogmali
In Orbe Terrum Non Visi
Paging erocker........
Posted on Reply
#9
RejZoR
So, i'll just force install R9-280 drivers and voila, free upgrade to a "new graphic card". It will say "Radeon R9-280" in all apps and performance will be there since i own the "old" HD7950.
Posted on Reply
#10
hardcore_gamer
Will it fix the frame latency crossfire issues in resolutions above 2560x1600 ?
Posted on Reply
#11
Random Murderer
The Anti-Midas
hardcore_gamerWill it fix the frame latency crossfire issues in resolutions above 2560x1600 ?
No.
Posted on Reply
#12
Casecutter
hardcore_gamerWill it fix the frame latency crossfire issues in resolutions above 2560x1600 ?
Not on your system...
Posted on Reply
#13
_larry
What are the fixes/improvements exactly? It just says it supports the new cards on the AMD website. I'm very wary of any new software releases when any kind of new hardware is involved.
Posted on Reply
#14
fullinfusion
Vanguard Beta Tester
Great driver, the best so far in my books. Thanks TPU for sharing this and thank you Amd for the driver! :rockout:
Posted on Reply
#15
manofthem
WCG-TPU Team All-Star!
The only thing I can complain about is that Gpu2 in cfx sits at 99% all the time by default. I disable ulps now, but it's just a little quirk.

Otherwise, everything is solid ;)
Posted on Reply
#16
fullinfusion
Vanguard Beta Tester
manofthemThe only thing I can complain about is that Gpu2 in cfx sits at 99% all the time by default. I disable ulps now, but it's just a little quirk.

Otherwise, everything is solid ;)
Yup I didn't see that till you pointed it out.. It's doing the same thing here :wtf:

Only with a web page it maxes out, but the other drivers did the same thing... but it was never 100%
Posted on Reply
#17
manofthem
WCG-TPU Team All-Star!
fullinfusionYup I didn't see that till you pointed it out.. It's doing the same thing here :wtf:

Only with a web page it maxes out, but the other drivers did the same thing... but it was never 100%
Yes, every since these beta drivers came out to fix frame pacing, I've had this little issue. I didn't back with like 13.4ish, but is not too bit of a deal reslly, simple fix.
Posted on Reply
#18
fullinfusion
Vanguard Beta Tester
manofthemYes, every since these beta drivers came out to fix frame pacing, I've had this little issue. I didn't back with like 13.4ish, but is not too bit of a deal reslly, simple fix.
how do you fix it? I hate opening FF and have the 2nd gpu at full power and then the fan gets louder n louder for the temp build up.
Posted on Reply
#19
manofthem
WCG-TPU Team All-Star!
fullinfusionhow do you fix it? I hate opening FF and have the 2nd gpu at full power and then the fan gets louder n louder for the temp build up.
Disabling ULPS fixes that. You can do it manually in the registry, or MSI AB and Trixx have an option to do it for you, in the he settings. Reboot after that and you're good :)
Posted on Reply
#20
fullinfusion
Vanguard Beta Tester
manofthemDisabling ULPS fixes that. You can do it manually in the registry, or MSI AB and Trixx have an option to do it for you, in the he settings. Reboot after that and you're good :)
Ok thanks man, ill give it a go :toast:
Posted on Reply
#21
DF is BUSY
manofthemDisabling ULPS fixes that. You can do it manually in the registry, or MSI AB and Trixx have an option to do it for you, in the he settings. Reboot after that and you're good :)
was haaving the same problem, thanks
Posted on Reply
#22
fullinfusion
Vanguard Beta Tester
manofthemDisabling ULPS fixes that. You can do it manually in the registry, or MSI AB and Trixx have an option to do it for you, in the he settings. Reboot after that and you're good :)
I found a program to disable ULPS and it works fine..But Now ulps is enabled and the highest the 2nd card goes is 300mhz in my browser. It seemed to fix the max clock on the second card of 1010MHz :D
before you run it disable your antivirus otherwise the AV goes into threat mode, well Avast does anyways, and not sure how others behave.

Grab it HERE
INFO AND SOURCE
Posted on Reply
#23
-Gast-
If i open CCC and look at the data for the second "card" (7990) with no other tool running, it shows me "0" everywhere, like it should be.

When opening GPU-Z (for example) while i still have CCC open, everything goes up to full load on the second core.

Can anyone confirm that it only happens when you start a "monitoring tool"

Seems like ULPS doesnt work if you have such a tool running
Posted on Reply
#24
Melvis
manofthemDisabling ULPS fixes that. You can do it manually in the registry, or MSI AB and Trixx have an option to do it for you, in the he settings. Reboot after that and you're good :)
Ill have to try this when i get home as this was the deal breaker for me and i went back to 13.4's.

:toast:
Posted on Reply
Add your own comment
Dec 22nd, 2024 02:08 EST change timezone

Latest GPU Drivers

New Forum Posts

Popular Reviews

Controversial News Posts