Friday, August 22nd 2008

USB 3.0 SuperSpeed Demonstrated

Aug 22nd, 2008 02:56 Discuss (49 Comments)

USB 2.0 has been around for quite some time now, it's already become a serious bottleneck with storage devices where its "up to" 480 Mbps speed limits transfer-rate significantly compared to what today's devices demand. External-SATA had proven to eradicate that bottleneck by providing speeds for external storage devices on par with internal fixed drives. A newer standard of the USB is in the works, this newer interface on paper promises 10-times the amount of bandwidth USB 2.0 did, that's 4.8 Gbps, more than three times over that of e-SATA, 1.5 times over e-SATA II.

At the ongoing Intel Developer Forum (IDF) event, prototype USB 3.0 boards and cables were shown transferring at 307+ MB/s. The USB 3.0 coalition proclaims this is fast enough to transfer a 27 GB HD in just 60 to 70 seconds. This interface is backwards compatible with USB 2.0 (HiSpeed) and USB 1.1 (FullSpeed), and will be referred to as SuperSpeed. A representative from Ellisys said current flash memory and hard drive storage capacities are outstripping USB 2.0 transfer speeds.

Source: TG Daily

Add your own comment

49 Comments on USB 3.0 SuperSpeed Demonstrated

Wile E

Power User

I don't believe them. i bet that was just a short burst.

Zehnsucht

With powered eSATA in the works, I don't see how this will be a hit.

Mussels

Freshwater Moderator

300MB/s sounds good. As long as it does 250MB/s sustained i see a long life for that standard.

theJesus

I think it's funny that it still isn't an actual 480mbps even though they say it'll go "up to" 4.8gbps this time around.

Wile E

Power User

theJesusI think it's funny that it still isn't an actual 480mbps even though they say it'll go "up to" 4.8gbps this time around.

USB 2.0 is 480Mb(its) per second, not MB(ytes). 1MB = 8Mb.

So the theoretical USB2 throughput is 60MB/s. USB3 is 600MB/s theoretical.

Deleted member 3

Wile EI don't believe them. i bet that was just a short burst.

It's 50% efficiency, why can't that be true?

Wile E

Power User

DanTheBanjomanIt's 50% efficiency, why can't that be true?

It's just a personal feeling, not based on any evidence as of yet. I just don't trust them. lol. Anyway, I do want to see what the new interface can do. Hopefully I'll have to eat my words.

Dark_Webster

At least Microsoft must implement it well in Vista. Jeez, some times my Cruzer transfers at 30 MB ot 300KB on my lappy :).

theJesus

Wile EUSB 2.0 is 480Mb(its) per second, not MB(ytes). 1MB = 8Mb.

So the theoretical USB2 throughput is 60MB/s. USB3 is 600MB/s theoretical.

doh, the lower-case vs upper-case always throws me off as I over-look it :o

#10

Wile E

Power User

theJesusdoh, the lower-case vs upper-case always throws me off as I over-look it :o

I figured. That's why I pointed it out for you.

#11

Deleted member 3

Dark_WebsterAt least Microsoft must implement it well in Vista. Jeez, some times my Cruzer transfers at 30 MB ot 300KB on my lappy :).

And that isn't just because it's a bad stick or controller? I've had no issues with USB implementation so far.

#12

Mussels

Freshwater Moderator

no one trusts the USB3 specs because the USB 2.0 specs are full of crap. 480Mb/s is 60MB/s - i've never seen a transfer (USB HDD, flash drive, etc) ever break 30MB/s (sustained).

Its probably like wireless and powerline networking, where they measure up and down at the same time and claim its double the speed.

#13

lemonadesoda

In the bits vs. bytes discussion, dont forget that serial bit transfer requires start, stop, EC, CRC control bits etc. There is a bigger overhead than with parallel data transfer, esp. with how we measure throughput of HDDs. So you need more than 8 bits to get 1 byte worth of data. This is where the "50% efficiency" comes in. A combination of "burst", "wait" and control/EC.

#14

Ketxxx

Heedless Psychic

About time USB3 started being known about in the public. I'm still arguing why the hell does USB3 need to be backwardly compatible with USB 1.1 though.. NOBODY uses bloody 1.1 and I bet less than 3% of PC owners actually still own a USB1.1 device.

#15

TheMailMan78

Big Member

Ya know Iv been messing around with computers for 20 years and I had no F#@KING clue there was a difference between "MB" and "Mb". I never gave it much thought and if I did just figured it was a typo. I feel like such a newb! :laugh: I love this forum!

#16

chron

all i can say is wow

#17

PVTCaboose1337

Graphical Hacker

Musselsno one trusts the USB3 specs because the USB 2.0 specs are full of crap. 480Mb/s is 60MB/s - i've never seen a transfer (USB HDD, flash drive, etc) ever break 30MB/s (sustained).

Its probably like wireless and powerline networking, where they measure up and down at the same time and claim its double the speed.

This is probably right... sadly. I think the hardware though is the weak link in the examples you gave though.

#18

cdawall

where the hell are my stars

so who thinks this will actually give good transfer rates? and who thinks this will be another firewire looks slower but smokes USB2.0 thing? this time its going to be eSATA looks slower but is really much faster because its not a burst protocol its sustained speeds like firewire

#19

newconroer

Firewire > USB.

Shame it didn't catch on more.

#20

timta2

newconroerFirewire > USB.

Shame it didn't catch on more.

I agree! In the real world Firewire 400 smokes USB 2.0.

#21

WarEagleAU

Bird of Prey

I have an External that is firewire and boy it transfers the hell out of some data.

personally, I like sustained speeds and true to form data, not speculation and paper specs, which is what this seems like to me.

#22

theJesus

KetxxxAbout time USB3 started being known about in the public. I'm still arguing why the hell does USB3 need to be backwardly compatible with USB 1.1 though.. NOBODY uses bloody 1.1 and I bet less than 3% of PC owners actually still own a USB1.1 device.

Unfortunately, G15 rev1 (don't know about rev2) keyboards use usb1.1 for their pass-through ports (not the actual connection though). So if I still use this keyboard when USB 3.0 is standard, I'd like to still be able to plug a new mouse into it (unless it's some super-high dpi monster).

#23

Mussels

Freshwater Moderator

KetxxxAbout time USB3 started being known about in the public. I'm still arguing why the hell does USB3 need to be backwardly compatible with USB 1.1 though.. NOBODY uses bloody 1.1 and I bet less than 3% of PC owners actually still own a USB1.1 device.

most mice and keyboards still use 1.1. Lots of webcams do too.

80% or so of people would still have a 1.1 device - seriously, go have a look. i still have a USB 1.1 scanner and printer as well.

#24

tkpenalty

KetxxxAbout time USB3 started being known about in the public. I'm still arguing why the hell does USB3 need to be backwardly compatible with USB 1.1 though.. NOBODY uses bloody 1.1 and I bet less than 3% of PC owners actually still own a USB1.1 device.

All in my input prephrieals use USB 1.1 FYI :shadedshu

#25

MadClown

i want my instant data transfer, give me some of dem holografix disks

Add your own comment

USB 3.0 SuperSpeed Demonstrated

49 Comments on USB 3.0 SuperSpeed Demonstrated

Latest GPU Drivers

New Forum Posts

Popular Reviews

Controversial News Posts

USB 3.0 SuperSpeed Demonstrated

Related News

49 Comments on USB 3.0 SuperSpeed Demonstrated

Latest GPU Drivers

New Forum Posts

Popular Reviews

Controversial News Posts