Earlier today, we brought you a story about NVIDIA TITAN V setting you back by up to $7,196 for two cards and two $600 NVLink cables. We got word from NVIDIA that the card neither features NVLink, nor supports SLI, and have since edited it. The NVLink fingers on the TITAN V card are rudiments of the functional NVLink interface found on the Tesla V100 PCIe, being developed by NVIDIA, as the TITAN V, Tesla V100, and a future Quadro GV100 share a common PCB. The NVLink fingers on the TITAN V are concealed by the base-plate of the cooler on one side, and the card's back-plate on the other; so the female connectors of NVLink bridge cables can't be plugged in.

With the lack of SLI support on what is possibly it's fastest graphics card based on the "Volta" architecture, NVIDIA seems to have responded to market trends that multi-GPU is dying or dead. That said, it would be interesting to see if professional overclockers chasing benchmark leaderboard glory pick up the TITAN V, as opposed to two TITAN Xp in SLI or four Radeon RX Vega 64 in 4-way CrossFireX.

NVIDIA's flagship graphics card targeted at gamers and PC enthusiasts, the TITAN X Pascal, will be available from today, exclusively through the GeForce website, at this page. NVIDIA will be directly marketing the card. The card is priced at US $1,199 (excl taxes). Based on the 16 nm "GP102," derived from the "Pascal" architecture, the TITAN X Pascal features 3,584 CUDA cores, 224 TMUs, 96 ROPs, and a 384-bit wide GDDR5X memory, holding 12 GB of memory. The chip is clocked at 1417 MHz core, with 1531 MHz GPU Boost, and 10 Gbps memory, working out to 480 GB/s memory bandwidth. Like the GTX 1080 and GTX 1070, the TITAN X Pascal appears to be limited to 2-way SLI.More pictures follow.

NVIDIA today announced its third desktop consumer graphics card based on the "Pascal" architecture, the GeForce GTX 1060. NVIDIA aims to strike a price-performance sweetspot, by pricing this card aggressively at US $249 (MSRP), with its reference "Founders Edition" variant priced at $299. To make sure two of these cards at $500 don't cannibalize the $599-699 GTX 1080, NVIDIA didn't even give this card 2-way SLI support. Retail availability of the cards will commence from 19th July, 2016. NVIDIA claims that the GTX 1060 performs on-par with the GeForce GTX 980 from the previous generation.

The GeForce GTX 1060 is based on the new 16 nm "GP106" silicon, the company's third ASIC based on this architecture after GP100 and GP104. It features 1,280 CUDA cores spread across ten streaming multiprocessors, 80 TMUs, 48 ROPs, and a 192-bit wide GDDR5 memory interface, holding 6 GB of memory. The card draws power from a single 6-pin PCIe power connector, as the GPU's TDP is rated at just 120W. The core is clocked up to 1.70 GHz, and the memory at 8 Gbps, at which it belts out 192 GB/s of memory bandwidth. Display outputs include three DisplayPorts 1.4, one HDMI 2.0b, and a DVI.

In a move that's set to not go down well with gamers looking for 4K 60 Hz gameplay with eye-candy maxed out; NVIDIA has changed the way it approaches 3-way and 4-way SLI support for the GeForce GTX 1080 and GTX 1070. While out of the box, you can enable 2-way SLI using either an SLI HB bridge (recommended for certain high resolutions), or even a classic 2-way SLI bridge; 3-way and 4-way SLI support will be restricted to a select few non-gaming apps.

At the launch of the GTX 1080, NVIDIA told the press that it will officially not support 3-way and 4-way SLI for GeForce "Pascal" GPUs, however, it will provide a recourse for enthusiasts, by setting up an "SLI enthusiast key" webpage, from which enthusiasts can obtain a software key that unlocks 3-way and 4-way SLI support using classic bridges. NVIDIA would have merely optimized its drivers up to 2-way SLI, and the odd lucky gamer would be able to take advantage of 3-4 GPUs if a game developer got generous. That's no more to be.

Here some of the first pictures of an NVIDIA add-in card (AIC) partner branded SLI-HB (high-bandwidth) bridge. This kind of bridge is recommended for use with GeForce "Pascal" graphics cards, at high resolutions, such as 4K @ 60 Hz with HDR, 4K @ 120 Hz, 5K, and above. Pictured here is a 2-way SLI HB bridge with 2U spacing (1-slot gap between the two cards). The bridge appears to have a red LED of its own, lighting up the MSI Gaming dragon logo. At this point it's not clear whether the bridge comes included with the cards, or if it needs to be purchased separately. The cards being bridged in these pictures are the MSI GeForce GTX 1080 Gaming Z, a notch above the GTX 1080 Gaming X the company debuted its custom GTX 1080 lineup with.

At its GeForce GTX 1080 launch event, NVIDIA is said to have told the press that with its GeForce "Pascal" series, the company will focus on 2-way SLI "for maximum performance," implying an uncertain future for 3-way and 4-way SLI. The company's new SLI HB bridge introduced with the GTX 1080, enables higher bandwidth between two graphics cards in SLI, letting them more reliably render games at high resolutions. On the downside, this new bridge occupies both SLI contact points on each card, in 2-way SLI.

It might still be possible to do 3-way and 4-way SLI using a classic 3-way or 4-way bridge included with your motherboard. You'd be at the mercy of applications somehow being able to take advantage of 3-4 GPUs, NVIDIA on its part, will likely only optimize its drivers for 2-way SLI. The knight in shining armour here is DirectX 12 native multi-GPU, which doesn't care how many GPUs you're using, or if they're even the same kind (as long as the GPUs and the app support Direct3D 12).

ASUS announced a fleet of socket LGA1150 motherboards, covering its mainline (classic), Republic of Gamers (ROG), and The Ultimate Force (TUF) lines. With this series, ASUS is adopting a new color scheme for its mainline motherboards, breaking away from the black PCB with blue heatsinks scheme it maintained since the first LGA1156 motherboards, almost four years ago. The new mainline motherboards from ASUS feature black PCBs with golden-colored heatsinks covering the VRM and PCH, and simpler naming. ASUS' first wave of Z87-based mainline (classic) motherboards include the entry-level Z87-C and Z87-A, mid-range Z87-PLUS and Z87-PRO, and premium Z87-DELUXE.

NVIDIA's big GeForce GTX 680 launch is just around the corner, but performance figures are already trickling in. Last week, we were treated to a wide range of benchmarks covering a single GeForce GTX 680. Today, VR-Zone posted a performance-preview of the GeForce GTX 680 in 2-way SLI configuration. A set of two GTX 680 cards were put through 3DMark 11 in Entry, Performance, and eXtreme presets. It should be noted here, that the GTX 680 cards were clocked at 1150 MHz core, and 1803 MHz (7.20 GHz effective) memory.

In the Entry preset, GTX 680 2-way SLI scored E22878; it scored P16860 in Performance preset; and X6243 in eXtreme. 2-way SLI of GTX 680 should be fit for 2560x1440/1600 resolution gaming. The rest of the test-bench consisted of Intel Core i7-3930K six-core processor clocked at 5.00 GHz, with 16 GB of quad-channel DDR3-2133 MHz memory, and ASUS ROG Rampage IV Extreme motherboard.

Club 3D announced its newest performance-segment graphics card, the GTX 560 Ti CoolStream with 2 GB of GDDR5 memory (model: CGNX-XT5648). Based on the 40 nm GF-114 silicon, this card features 384 CUDA cores, and makes use of 2 GB of GDDR5 memory, double the standard memory amount, across a 256-bit wide memory interface. It sports a compact in-house PCB design by Club 3D, and is cooled by an in-house dual-fan cooling solution that makes use of heat pipes to convey heat through stacks of aluminum fins, which are then ventilated by two 80 mm fans.

The card features clock speeds of 822 MHz core, 1644 MHz CUDA cores, and 1002 MHz (4008 MHz effective) memory, sticking to NVIDIA reference speeds. The card is 2-way SLI capable, draws power from two 6-pin PCIe power connectors, and its display outputs include two DVI and a mini-HDMI. The new Club 3D GeForce GTX 560 Ti CoolStream 2 GB is expected to be priced at €245 or US $329, including taxes. Club 3D will also launch a special edition of this card that includes a license of Battlefield 3. The Battlefield 3 Edition variant will be priced at €265 or $355, including taxes.

Here are the first pictures of MSI's socket LGA2011 motherboard in the micro-ATX form-factor. Earlier this week, we got to see through ASRock's X79 Extreme4-M that LGA2011 micro-ATX boards were indeed possible. Called the MSI X79MA-GD45 (MS-7738 V1.1), this board offers all the connectivity possible on a board with such a tight footprint. The LGA2011 socket is powered by a 9-phase VRM. It is wired to four DDR3 DIMM slots, two on either sides of the socket, powered by 2-phase VRM. Expansion slots include two each of PCI-Express 3.0 x16 and PCI-Express 2.0 x1. 2-way SLI and CrossFire are supported.

SATA connectivity includes two SATA 6 Gb/s (white), four SATA 3 Gb/s (black). There are no eSATA ports, but four USB 3.0, two on the rear panel, two by internal header, driven by Renesas-made controllers. The rest of the connectivity is fairly standard: 8+2 channel HD audio driven by Realtek ALC892 CODEC with optical and coaxial SPDIF outputs, single gigabit Ethernet driven by Realtek 8111E, and a number of USB 2.0 ports. One of the front-panel USB 2.0 headers is designed for charging portable devices even with the system shut down (yet plugged in). The board will be driven by UEFI firmware, we're getting to see some nifty features for overclockers such as voltage measurement points across a wide range of voltage domains.

Leadtek Research Inc., known globally for its extreme visual graphics technology, added the new WinFast GTX 560 Ti Hurricane graphics card to the Fermi II generation family for enthusiasts. It features dual 90 mm fans, two 8 mm cooper heat-pipes, a large copper base and many fan fins equipped behind the GeForce Fermi 114 chipset, which can reduce temperature more effectively than the standard version containing only two 6 mm cooper heat-pipes from the chipset manufacture. This not only means improvements in the thermal solution but also in noise emission. Only 21 dB is measured during idle time, and even during peak time, it is just 43 dB. Leadtek will release more dual fan design graphics cards, naming them "Hurricane", to highlight these features.

Palit unveiled a new limited-edition GeForce GTX 560 Ti based non-reference design graphics card, the Palit GTX 560 Ti Twin Light Turbo. The card's design is based on a black colored PCB (Palit uses a red-colored one on its regular GTX 560 Ti cards), and a unique GPU Cooler design. The heatsink follows essentially the same structure as the one featured on Gainward Phantom cards, in which heat is conveyed to the aluminum fin stack by four heat pipes, but the fans that ventilate the card are located on the side of the heatsink facing the PCB, rather than on top of it. The fans draw in air from the heatsink. Palit claims that the cooler has a noise output of less than 10 dBA.

The clock speeds of the card are not given out, yet. Like every other GTX 560 Ti, this card makes use of a 40 nm GeForce Fermi 114 GPU, is DirectX 11 compliant, packs 384 CUDA cores, and makes use of 1 GB of GDDR5 memory across a 256-bit wide memory interface. Display outputs include two DVI, and one each of D-Sub and HDMI (full-size). There is one SLI connector that allows 2-way SLI with any other GTX 560 Ti card, and power is drawn in from two 6-pin PCIe power connectors. Availability and pricing information is not known at the moment.

As the market for compact PCs grows, so will the push to make them faster. In space-congested mini-ITX form-factor cases, you're more likely to face a crunch with the length of addon-cards the case can accommodate, than its height (whether it's low-profile or full-height). To address this, Japansese graphics card manufacturer ELSA unveiled its latest GeForce GTX 560 Ti based graphics card, which uses a much shorter PCB (lengthwise).

Called the ELSA Gladiac GTX 560 Ti Mini, the card provides a reasonably powerful GPU that's game for 1080p gaming, in a compact form-factor. The PCB's length is 59 mm less than that of NVIDIA reference PCB. It uses a heat-pipe fed fan-heatsink assembly that uses a 80 mm fan to ventilate a dense aluminum fin array. The card uses clock speeds of 822 MHz, 1644 MHz, and 4008 MHz (core/CUDA cores/memory effective). It features 1 GB of GDDR5 memory over a 256-bit wide memory interface. It can pair with any other GTX 560 Ti card in 2-way SLI configuration. It will make its way to markets next week.

After much delay, EVGA released its first wave of LGA1155 motherboards based on the Intel Z68 chipset featuring Intel Smart Response technology. Quite surprisingly, none of EVGA's Z68 motherboards feature display outputs. The series is topped by Z68 FTW, designed for enthusiasts and overclockers; followed by Z68 SLI, geared for gamers with NVIDIA SLI graphics setups; and Z68 SLI Micro, an SLI-ready board in the micro-ATX form-factor.

The Z68 FTW uses a similar layout to the P67 FTW. It uses a strong VRM to power the CPU and memory, it provides as many as six PCI-Express x16 slots, making use of a nForce 200 bridge chip that makes it 3-way and 4-way SLI ready. It is loaded with overclocker-friendly features such as EVbot support, a front-panel OC controller, and an overclocking gauge. The Z68 FTW is also available as a package without those two accessories.

Gigabyte released pictures of G1.Sniper 2, the company's first socket LGA1155 motherboard in the G1.Killer series of motherboards designed for gamers with overclocker alter-egos (the same market ASUS Republic of Gamers targets). The board is based on the Intel Z68 Express chipset without any additional PCI-E bridge chip such as NVIDIA nForce 200. The board supports 2nd generation Core "Sandy Bridge" LGA1155 processors. The first G1.Sniper was a LGA1366 motherboard based on Intel X58 chipset.

Apart from being yet another high-end 2-way SLI/CrossFire Z68 motherboard, which Gigabyte's mainline Z68X series motherboards already achieve, the G1.Sniper 2 packs two extremely gamer-specific onboard devices: the Bigfoot Killer E2100 low-latency, high-offload PCI-Express network controller with its of dedicated memory; and Creative Sound Blaster X-Fi hardware audio with CA20K2 PCIe processor and 64 MB XRAM, backed by a high-grade Cirrus Logic DAC and OPAMP circuit, driving signal-noise ratio easily above 105 dBA with punchy bass.

Club 3D today announced a new GeForce GTS 450 graphics card that comes with 2 GB of DDR3 memory instead of its standard 1 GB GDDR5. The memory is installed across a 128-bit wide memory interface. Club 3D's card bears a standard-looking design with a green, full-height PCB, and simple fan-heatsink with radially-projecting aluminum fins and a fan to ventilate it. There's an SLI finger to provide 2-way SLI support.

The Club 3D GTS 450 2 GB varries clock speeds of 700 MHz core, 1400 MHz CUDA cores, and 1200 MHz memory. The DirectX 11 compliant GPU packs 192 CUDA cores. Display output connectivity includes one each of DVI, D-Sub, and HDMI 1.4a. NVIDIA 3DVision Surround is supported with two of these cards installed in SLI. Club 3D did not give out pricing information.

Like most others, Gigabyte is ready with some of its first motherboards to launch with AMD's new Fusion Llano A-Series APU platform, based the new FM1 socket and AMD A75 chipset. Gigabyte's top socket FM1 motherboard is called GA-A75-UD4H. It's a return to the company's signature blue Ultra Durable 3 PCB. The FM1 socket is powered by a 10-phase VRM, it is wired to four DDR3 DIMM slots supporting dual-channel DDR3-1866 MHz memory. Expansion slots include two PCI-Express 2.0 x16 (x8/x8 when both are populated), supporting AMD CrossFireX and NVIDIA 2-way SLI; three PCI-Express x1, and two PCI.

The A75 single-chip chipset handles all the storage connectivity on this board, with five SATA 6 Gb/s internal ports, and one eSATA 6 Gb/s. Display connectivity includes DVI, D-Sub, and HDMI. Other connectivity includes eight USB 3.0 ports driven by three controllers, including four ports by header, gigabit Ethernet, 8+2 channel HD audio driven by Realtek ALC889 CODEC, and FireWire. Expect this board to be out in mid-June.

NVIDIA SLI multi-GPU technology is going through a rough patch on the AMD platform, with very few NVIDIA nForce 900 series motherboards available/sold. With AMD looking to come back strong in the performance CPU market (which might cause high-end gaming PC users to switch platforms), it is wise on the part of NVIDIA to make SLI available to AMD platform users in some form. NVIDIA is making a cautious move: licensing SLI to motherboard vendors in the same protocol in which it licenses them to provide NVIDIA SLI support on Intel 5-series and 6-series chipset based motherboards.

This move is particularly wise because NVIDIA wouldn't need to invest on making a chipset (though it can) for AMD's upcoming "Bulldozer" CPUs, and still get licensing fees for NVIDIA SLI. That way, it wouldn't have to rely on the platform's overall market success. NVIDIA will offer SLI licenses to motherboards based on AMD's upcoming 9-series chipset, particularly to models that lack integrated Radeon graphics (that's AMD 990FX, and AMD 990X). It will offer 2-way SLI licenses to motherboards running AMD 990X, and 3-way/2-way licenses to boards based on AMD 990FX. It won't offer nForce 200 bridge chips. Further, only those motherboard manufacturers that are currently tied up with NVIDIA for SLI licenses on Intel platform, will be granted SLI licenses on AMD platform.

Joining the ranks of the mighty P67 Classified and P67 SLI is EVGA's third socket LGA1155 motherboard, the P67 Micro (120-SB-E672). Based on the P67 chipset, this board provides all the features of the chipset, and also provides 2-way SLI support. The CPU socket is powered by a 4+2 phase VRM, wired to four DDR3 DIMM slots for dual-channel memory. Expansion slots include two PCI-E 2.0 x16 (both electrical x8 at all times), and two PCI-E x1.

There are two SATA 6 Gb/s, four SATA 3 Gb/s, two eSATA 3 Gb/s ports. 8-channel HD audio with optical and coaxial SPDIF outputs, two USB 3.0 ports, a number of USB 2.0 ports, gigabit Ethernet, and Firewire make for the rest of the connectivity. Basic overclocker-friendly features include power, reset, and clear CMOS buttons on board, along with a POST diagnostic LED display. EVGA should add this motherboard to its ranks soon.

ASUS showed off its high-end socket LGA1155 motherboard lineup in London, including from its two top brands, ROG and Sabertooth TUF. The ROG Maximus IV Extreme, TUF Sabertooth P67, P8P67 Deluxe and P8P67 were on display. All four models are based on the Intel P67 Express chipset, designed to support upcoming Sandy Bridge architecture derived LGA1155 processors, or the 2011 Core processor family. Leading the pack is the Maximum IV Extreme. This board is literally bursting with features and is geared for extreme overclocking. There are no less than four PCI-Express 2.0 x16 slots, possibly driven by a PCI-E bridge chip, which allows 3-way and 4-way SLI/CrossFireX; four each of USB 3.0 and SATA 6 Gb/s ports, and ROG-exclusive features such as ROG Connect, and redundant BIOS.

Next in line is the TUF Sabertooth P67. Keeping in tune with the TUF series' main feature of providing very high durability, the Sabertooth P67 uses ceramic heatsinks and high-grade components. For the first time, we're getting to see a protective scaffolding covering most of the board's area on its obverse side (we've seen it on the reverse side on older models). ASUS is calling it "tactical vest". This board only supports two PCI-E x16 devices, 2-way SLI/CrossFireX.

Well placed sources seem to have finally pieced together specifications of NVIDIA's GeForce GTS 450 graphics card, the company's mid-range offering that competes with ATI Radeon HD 5700 series products. In the run up to this, we've come across reports showing that the SKU is based on a GPU codenamed GF106, then we came across NVIDIA reference design PCB drawings, followed by clock speeds, and finally, pictures of the GPU itself revealing quite a bit about the die size. The most recent report affirms the specs we know till now, plus revealed the CUDA core count, which is 192. The CUDA cores are clocked at 1566 MHz, and that the memory is clocked at 902 MHz (3608 MHz effective).

So as a quick recap of the tech specs of the GeForce GTS 450, it's based on the new 40 nm GF106 silicon, the die area is roughly 240 mm². The GPU has 192 CUDA cores, and a 128-bit wide GDDR5 memory interface holding 1 GB of memory. The core is clocked at 789 MHz, and memory at 902 MHz (3608 MHz effective), translating into 57.8 GB/s of memory bandwidth, CUDA cores at 1566 MHz. It supports 2-way SLI, and gives you access to the latest PC graphics technologies, including support for DirectX 11 and OpenGL 4.x, along with support for a wide range of NVIDIA-exclusive technologies. NVIDIA's GeForce GTS 450 will be released by mid-September.

Next-generation gaming has officially arrived with the introduction of the EVGA GeForce GTX 460. Built from the ground up for DirectX 11, this card delivers the ultimate next generation gaming experience. With up to 4x the DirectX tessellation performance of the competition, the EVGA GeForce GTX 460 packs incredible detail and blazing fast fames into your games. Now you can have it all, without blowing your budget.

In addition, full support for NVIDIA 3D Vision, Surround Gaming, PhysX and CUDA technologies make this card the ultimate value for the gaming enthusiast. And of course with EVGA's award winning support, utilities and community; the EVGA GeForce GTX 460 delivers the ultimate package.

NVIDIA made its GeForce GTX 480M GPU official today. The DirectX 11 compliant GPU is based on the GF100 core and packs all the features of its desktop counterpart, such as decentralized hardware tessellation, next-generation CUDA and DirectCompute 5.0. The GF100 core has a configuration similar to the GeForce GTX 465 desktop GPU. It has three of its four graphics processing clusters (GPCs), and 11 out of 16 streaming multiprocessors (SMs) enabled, giving a CUDA core count of 352. To reduce the overall board footprint, the GPU makes do with a 256-bit wide GDDR5 memory interface, with 1 GB of memory.

To make keep up with the electrical constraints of notebooks, the GTX 480M uses much lower clock-speeds than any desktop product that uses GF100. The core is clocked at 425 MHz, shader domain at 850 MHz, and memory at 600 MHz (real) or 2.40 GHz (effective), which gives a memory bandwidth of 76.8 GB/s. As mentioned earlier, the full feature-set of its desktop counterparts is packed with the GTX 480M, including support for NVIDIA 3D Vision, PureVideo HD, PhysX, and CUDA. It can pair with up to two boards of its kind in 2-way SLI. Constraints of the notebook form-factor won't allow any more boards, anyway. The GPU is open to Notebook manufacturers to plan their designs around. NVIDIA claims the GTX 480M to be the fastest notebook GPU. It finds direct competition in the ATI Mobility Radeon HD 5870, which is based on the 800 stream processor-laden Juniper core.

EVGA is readying a new high-end socket LGA1366 motherboard building on its FTW (for the win) moniker, the X58 FTW3, carrying the EVGA SKU code of 132-GT-E768-KR. The new motherboard was spotted on the North American online retailer NCIX.com, where it was listed for US $342.39 and CA $319.99, before EVGA even launched the product or gave it a product page on the company website.

The 132-GT-E768-KR is a standard ATX motherboard. The CPU is powered by an 8-phase standard VRM, it is wired to six DDR3 slots for triple-channel memory support. The X58 IOU is cooled by a larger than usual heatsink, which slants towards the socket to give clearance to large CPU coolers. The X58 and ICH10R stick to the specifications, with no additional bridge chip. Expansion slots include three PCI-Express 2.0 x16 (x16, x8, x8 when all three are populated, x16, x16, NC when the first two are), supporting 3-way SLI, 2-way SLI, and ATI CrossFireX. Connectivity includes two SATA 6 Gb/s and six 3 Gb/s ports, two gigabit Ethernet controllers, 8 channel audio, two USB 3.0 and 8 USB 2.0 ports, and support for the EVBot OC module. EVGA should officially introduce this board soon.

Soon after EVGA laid its hands on stocks of GeForce GTX 480 graphics cards, it claims from an internal test that 4-way SLI is possible on the reference design GTX 480 graphics cards. The GTX 480 was advertised to work with up to two more of its kind in 3-way SLI, in NVIDIA's presentations to the press. EVGA's feat of running four GTX 480 cards was possible on its X58 Classified 4-way SLI motherboard, which has room for four graphics cards, and a special SLI bridge that connects to four NVIDIA graphics cards with two SLI interconnect bridges each. EVGA released a special-edition GeForce GTX 285 4-way SLI ready graphics card to go with the motherboard.

The EVGA X58 Classified 4-way SLI isn't the only motherboard to support 4-way SLI, the recently released EVGA Classified SR2 also ships with the special SLI bridge. No other motherboard vendor released a 4-way bridge, yet. EVGA demonstrated the 4-way SLI setup with a run of Unigine Heaven, although it did not give away any performance numbers. 4-way SLI is not to be confused with Quad-SLI, which is also a four-GPU SLI configuration, but involves a 2-way SLI connection between two dual-GPU graphics cards (such as GeForce 9800 GX2, GTX 295, MARS). Any SLI-supportive motherboard supports Quad-SLI.