Evercool rolled out the Ever Green Fan 12 Plus. This 140 mm spinner that can fit into 120 mm fan-mount holes, jumps into the "green" bandwagon by being made of eco-friendly materials, and using technologies that reduce power-draw and noise. Wherever possible the Ever Green minimizes plastic content, by using a thin round frame compared to a thick square one. It uses a lime-green frame, with a darker-green 9-blade impeller. The motor uses an "Ever Lubricated" bearing, which steps up the rated life-span all the way up to 40,000 hours. The fan spins at 1200 ± 10% RPM, with less than 23 dBA of noise output. The frame has a silicone gasket on one side, that absorbs vibrations. Rubber bolts, instead of metal screws are provided, that further reduce vibration transfer. Evercool did not give out pricing of the Ever Green Fan 12 Plus.

Lexar Media, a leading global provider of memory products for digital media, today announced the Crucial Ballistix Active Cooling Fan, a snap-on proactive solution to decrease memory module heat by increasing airflow. The Crucial Ballistix Active Cooling Fan cools memory modules by eliminating 'dead spots' of airflow within the case. The fan is especially effective with water-cooled systems where internal airflow around the memory modules is often minimal. Watch a short video demonstrating how the Crucial fan increases airflow inside a computer case artificially filled with smoke. The Crucial Ballistix Active Cooling Fan is available globally today through select partners and online at Crucial.com.

"With higher densities of memory running fully populated in motherboard memory slots?along with faster speeds?performance systems demand additional cooling," said Jeremy Mortenson, Crucial senior product manager. "Whether you run your memory at stock speeds or push it to the limits with overclocking, temperature plays a critical role in reliability. The new Crucial Ballistix Active Cooling Fan can improve airflow and keep your memory running cooler."

Kingston Technology, Company, Inc., the independent world leader in memory products, today announced it is shipping the HyperX fan in black. The new black fan is identical in performance and specifications to the blue-colored HyperX fan released in June 2009.

The dual 60mm fans optimize airflow around the modules helping memory run at peak performance for longer periods of time. The black HyperX Fan is made of anodized aluminum and when turned on, the blades are illuminated by eight small blue LEDs. Power use is minimal and noise is not an issue as the fan runs at a whisper-quiet 25 dBA.

Lamptron, known most for its fan controllers ranging from the retro aviator switch Hummer to the analog rheostat-driven FC3/4/5 series, and the speed/temperature digital monitoring-equipped FC6, is now out with a touchscreen-based FCT "Touch", that completely does away with buttons, switches and knobs for touch-based control. The FCT occupies a 5.25" drive bay, and takes 6 independent fan channels of up to 30W each, along with fan-speed and thermal-zone real-time monitoring. It comes with two CNC-milled bezel options: graphite black and silver. Pricing is not known at this time.

Japanese Cooling expert Scythe is announcing the availability of a new High RPM version of the popular Slip Stream PWM fan series. Slip Stream 120 PWM High-RPM is equipped with PWM feature which allows the mainboard to automatically control the fan speed in a range between 500 (+200 rpm) and 1,900 rpm (±10%) whereas the airflow of up to 110.31 CFM is being created which equals ca. 187,41 m³/h. This allows the High RPM version to cover a wider range compared to the already existing Slip Stream 120 PWM fan which is spinning in a range of 0 (+200 rpm) and 1,300 rpm (±10%) making the High RPM version suitable for high performance systems as well as overclocking use.

Besides the Slip Stream 120 PWM Adjustable which allows to adjustment of the PWM bandwidth and the Slip Stream 120 PWM & V.R. which additionally gives the possibility to manually control the fan speed using the Voltage Regulation, new Slip Stream 120 PWM High-RPM is equipped with the standard PWM feature allowing the automatic fan control via the mainboard.

Shuttle Inc., a leading developer and manufacturer of multi-form-factor solutions such as the world-famous XPC Mini-PC Barebones, today announces the official European sales launch of the XS35 series. There are in total eleven versions of the new model available, which all boast a compact format of just 38 mm in width, high connectivity and a completely passive (fanless) cooling system.

As the smallest-ever Mini-PC from Shuttle (25.2 x 3.85 x 16.2 [cm, DWH]) the XS35 offers particularly low energy consumption. The series is based on efficient technologies and uses the Intel Atom D510 dual-core processor (2x 1.66 GHz), SO-DIMM memory, 2.5 inch hard disks and slim-line drives. Since no fans are used at all, any models work virtually silently even under heavy load. Using no fans also means less maintenance is required.

Thermal Solutions specialist GELID Solutions launches their first 140mm silent UV reactive waterproof blue case fan with multi-award winning unique Nanoflux bearing technology. The WING 14 UV Blue (140mm case fan) was added to the series of multi-award winning WING 8, 9 and 12 UV Blue. Matching the other WING fans this fan is created especially for gamers and modders and features a unique Nanoflux bearing whose motor bearing is not only water - and dustproof but also allows the impeller to be removed for cleaning. The 11 fan blades with additional winglet design were created to achieve an airflow of approx. 80CFM by a fan speed of 1200 RPM. The fan also enables a great static pressure and is UV reactive. Even the slightest vibrations generated by the running fan will be absorbed by 4 Anti-vibration fan mounts which are provided in addition to traditional screws. Further a fan speed reduction cable is included in the package to lower the fan speed to a super silent 900 RPM.

Zalman has started shipping its newest low-noise case fans, the ZM-Fx-FDB series (where "x" is 1,2,3, representing 80 mm, 92 mm, 120 mm, respectively). The fan uses three means to lower noise output: a PWM-based speed control, silicone pins that attach it to the case instead of metal screws, and fluid-dynamic bearing (FDB) that has a long life and makes low noise. The FDB ensures the fan has a service life of 150,000 hours. The impeller is made of translucent (frost) plastic, though it isn't LED-lit. A low-noise speed mode can be selected by placing the provided resistor.

The ZM-F1-FDB spins at 1,400~2,000 rpm with 18~23 dBA noise output, ZM-F2-FDB at 1,300~2,000 rpm with the same 18~23 dBA noise, and ZM-F3-FDB at 1,000~1,500 with 18~23 dBA noise as well. With the ZM-RC56 resistor in place, the fans spin at a lower speed, with a constant noise output of 18 dBA. While the ZM-F2-FDB is due for market release on the 25th of September, the ZM-F1-FDB is priced at 7.9 EUR, and ZM-F3-FDB at 9.5 EUR.

Zalman today announced the ZM-SF3 fans in Europe, which feature what it calls "Shark's fin Blade" design. The ridges and protrusions on each fan-blade reduce turbulence, resulting in a better airflow to rotational speed ratio, and more importantly, reduced noise. This fan blade design is backed by a motor that makes use of what Zalman calls "Everlasting Quiet" (ELQ) bearing that makes use of a nano-composite material that results in a lifespan of over 150,000 hours with minimum noise.

The fan's frame uses blocks of silicone at its corners that dampen vibration, and silicone pins are provided instead of metal screws that bring down vibration transfer to the chassis even further. This results in a rated noise level of under 25 dBA. The fan measures 120 x 120 x 26.4 mm, weighing 118 g. It spins at speeds between 900 and 1,500 rpm. It takes its power from a 3-pin power connector. Zalman, however, did not announce pricing.

Sharkoon is expanding their "Silent Eagle" Case Fan-series with a model that has an edge length of 140mm. With increased airflow at a lower volume, the Sharkoon Silent Eagle 800 is particularly efficient for use in silent PC systems.

"Silent Eagle" case fans are characterized by their special design: The rotor blades had the surface texture of a golf ball. The numerous small, round dimples produce an increased amount of airflow. In addition, the rounded edges of the fan's frame improves the air influx.

Late last week, AeroCool released the Shark series 15-blade fans for use in PC cases, coolers and radiators. These fans make use of no less than 15 fan blades which have its design inspired from shark fins. These fans are available in 120 mm and 140 mm sizes, and in opaque black, and illuminated blue, Devil Red (red), and Evil Black (rust) colors.

The 15 blade design ensures high air flow at moderate speeds. The design is also enhanced by the fluid dynamic bearing which increases life-span. Rotating at speeds of up to 1500 rpm, the fans push 82.6 CFM (120mm) or 96.5 CFM (140mm) of air, with maximum noise outputs of 26.5 and 29.6 dBA, respectively. Two speed modes, a "power mode" (12 V) and a "silence mode" can be selected using the bundled voltage reduction cables. Each fan also bundles four steel and rubber screws. Said to reach stores in September, AeroCool's new fans go for 12.90 Euros for the 120 mm size, and 15.90 Euros for the 140 mm size.

Lamptron released its newest fan-controller, the Lamptron FC6. This four-channel controller provides analogue control over each of the four channels independently, complete with LED displays for each channel, and lets you monitor fan speeds and temperatures. The controller occupies one 5.25" drive bay in your case, and comes with a brushed-aluminum bezel. Each of the four channels can give out up to 20W of power, and connect to the fans over the 3-pin standard fan connectors. The LED display comes in several colour options. Lamptron's new fan-controller will start selling in the US soon, for US $45.99.

Japanese cooling specialist Scythe presents the new Kama Flow 2 fan series. Equipped with the newly developed silent EX-FDB bearing, these fans are available in three sizes (80mm, 92mm and 120mm) with three different rpm models each.

The EX-FDB (Extra Fluid Dynamic Bearing) comes with a group of "V" shaped grooves, ensuring an even distribution of the oil film in the shaft housing and thus reducing friction to a minimum level. In this way, low noise and a lifespan of 120,000 hours (MTBF) can be achieved. Especially the low-speed versions are suitable for use in silent computer systems. For easy connection to PC power supplies, a 3-pin to 4-pin Molex adapter is included.

Scythe announces the brand new Slip Stream 140 mm fan series which is the successor of former Kaze Maru 140 mm fan series. These new models have been first introduced as a PWM version in combination with the recently released Grand Kama Cross CPU Cooler, and are now available as four individual retail products. Interested users can have the choices among 500, 800, 1,200 and 1,700 rpm models, where the 500 rpm model is specified with 27.2 CFM (46 m³/h) at 9.6 dBA and the fastest mode 92.4 CFM (157 m³/h) at 36.4 dBA.

New Slip Stream 140 fans feature a smaller center hub with larger fan blades, which results in higher airflow at lower fan speed. Regular 120 mm screw holes are used to mount the Slip Stream 140 mm fans, which allow wider range of uses. Scythe Slip Stream 140 mm case fan series is available for 9.95 EUR (excl. VAT) or US$ 12.00 (excl. TAX).

GlacialTech rolled out its new IceLight series of illuminated case fans. Available in 80 mm and 120 mm sizes, these fans come with transparent frames, fans with gloss-coated blades, and LEDs of various colors to give multicolored illumination. The IceLight 8025 (80 mm) has a speed of 1700 rpm, 19 dBA of rated noise output, and pushes 24.5 CFM of air, while the IceLight 12015 (120 mm) spins at 1000 rpm, with 20 dBA noise output, pushing 45.8 CFM of air. Both have rated MTBF of 30,000 hours. The blades are detachable, for cleaning. Their pricing isn't known as yet.

NZXT, a company built on realizing the dreams of gamers worldwide, is proud to announce its new line of premium cables and performance fans for PC enthusiasts. The new lineup premium cables consists of VGA, PSU, and HDD cables that are individually sleeved in a black enclosure to provide a sleeker look that seamlessly integrates into the case's interior. The additional benefit from incorporating these premium sleeved cables into your rig is enhanced cable management which is crucial for optimal airflow. NZXT's line of high performance fans includes a 120mm, 140mm, and 200mm version. Each fan has rifle bearings and 9 blade fins.

"For the avid PC enthusiast, effective cable management is a significant, yet time consuming stage of the build" said Johnny Hou, Chief Designer at NZXT. "Our new line of premium cables eliminates the need to sleeve cables on your own and provides a simple solution that will enhance aesthetics, improve cable management and increase airflow so internal temps remain low . Additionally, our new high performance fans provide our enthusiast community additional options when choosing effective airflow for their rig."

Thermal Solutions specialist GELID Solutions launches their first 120mm LED fan in green or blue light with unique magnet bearing and PWM.

The WING 12 PL features a unique Nanoflux bearing which ensures a friction-free and silent operation. Thanks to the clever design and magnetic bearing the impeller can be detached for easy cleaning. Additionally fan blade winglets were designed to achieve larger airflow and greater static pressure. In comparison to the multi-award winning Wing series the Wing 12 PL contains a premium PWM control so the temperature can be controlled precisely by the BIOS. LED lights in green or blue color were added to the WING 12 PL to give the fan a specific color.

Cooler Master is ready with a new 120 mm PC fan with the Excalibur. The fan is characterised by its perforated circular metal fan frame, and detachable fan blades that makes cleaning easy. It measures 120 x 120 x 25 mm, and is PWM controlled, spinning between 600 and 2,000 rpm ± 10%. At those speeds it pushes between 26.4 and 85.6 CFM of air, 0.75 to 3.53 mm H2O air pressure. Its noise output is rated between 13 to 30 dBA. The barometric ball bearing is said to more than double its life time over conventional fans. The Cooler Master Excalibur 120 mm fans is expected to reach stores soon, priced at 17.90 EUR. The fan is fit for use in cases, CPU coolers, and radiators.

Be Quiet! is out with the SilentWings PWM series of case fans. Available in sizes of 80 mm, 92 mm, and 120 mm, the fans feature blades with ridged surfaces. The PWM controlled motor allows user cotnrol over the fan speed. The copper-core fluid dynamic bearing ensures longer service life of 300,000 hours. The fan frame comes with a screw-less mounting system.

The 80 mm model comes with a rotational speed range of 500 ~ 2,000 rpm, 16.5 dBA of noise output, and up to 44.3 m³/h of airflow. The 92 mm model on the other hand, has a rotational speed ranged between 470 ~ 1,800 rpm, 17.5 dBA noise output, and 55.4 m³/h airflow. And lastly, the 120 mm one spins between 500 ~ 1,500 rpm, with a noise output of 18.5 dBA, and 85.5 m³/h of airflow. The three are priced between 11 to 14 EUR.

Expanding its line-up of premium quality quiet fans, Noctua today introduced its first 140mm model. Following in the footsteps of the successful NF-P12, the new NF-P14 FLX employs a nine blade impeller with Vortex-Control Notches in order to achieve superb quietness and outstanding aerodynamic efficiency. Other features include metal reinforcements for ultimate manufacturing precision as well as Noctua's premium grade SSO-Bearing and SCD2 technology.

"As more and more cases and coolers support 140mm fans, we've been receiving an increased amount of customer requests for a premium grade quiet fan in this size", explains Mag. Roland Mossig, Noctua CEO. "After more than 18 months of development and optimisation, we're proud to respond to this demand with the new NF-P14 FLX. Supporting both 120mm and 140mm mounting, the NF-P14 FLX will not only satisfy those looking for a reference class 140mm fan but also forms an ideal upgrade for 120mm case and CPU fans."

Scythe presents the new product, Kama Stay (Model Nr.: SCKST-1000). A simple very flexible product for mounting additional fans into an unused PCI Slot. The set also includes a manually regulated 120 mm Slip Stream Slim fan. Kama Stay is a highly-adjustable cooling platform that can be mounted onto an unused PCI Slot. Improved stability is granted by screwing the frame to a case like a common PCI expansion card. Once installed, Kama Stay allows you to mount all kinds of fans in many different positions. Even 140 mm fans can be used with this new accessory. Due to its high flexibility, Kama Stay helps you to adapt and improve the existing Airflow in your PC case.

Keeping your system cool is not the only task Kama Stay can handle. Optionally, you can also mount up to three 2.5" HDDs or SSDs. Just set the frame to the matching height and fix the drives with screws. Supplied 120 mm Slip Stream Slim fan works in an operating-speed range of 800 to 2,000 rpm. The fan speed can be controlled by using the pre-attached potentiometer located in the PCI bracket. Scythe Kama Stay is now available for EUR 12.25 (MSRP, excl. VAT) or US$ 19.00 (MSRP, excl. TAX.)

The Swiss low noise cooling solution provider ARCTIC COOLING today announced the launch of the ARCTIC F series case fan series in 80mm, 92mm and 120mm. As the advanced version of the previous AF fan series, these new fans are ideal for users who are looking for a quiet and efficient case ventilation solution.

The ARCTIC F series integrates some delicate features to improve the overall airflow and noise control management. Most 80mm and 92mm standard fans are equipped with 7 blades only, but all ARCTIC F fans, including the 80mm and 92mm ones, come with 9 blades in order to create higher airflow efficiently.

The Swiss low noise cooling solution provider ARCTIC COOLING today announced the launch of the ARCTIC F PWM case fans. They are in 3 sizes - 80mm, 92mm and 120mm. With the patented PWM Sharing Technology, these new fans are surely the best choice for silent enthusiasts.

Featuring PWM function, the ARCTIC F PWM fans run at the most necessary speed to deliver maximum cooling capacity at the lowest noise level possible. On top of that, thanks to the patented innovative PWM Sharing Technology (PST), up to 5 fans (including CPU fans) can be connected to the ARCTIC F PWM fan to share the PWM signal. The speed of all the fans in this PST system is now centrally controlled by a single PWM signal via BIOS.

Power and casing specialist Enermax released its Apollish series of coloured case fans. Available in standard 120 mm (model: UCAP12), and 80 mm (model: UCAP8) sizes, the fans have two attractive features apart from one which enhances its functionality. To begin with, the fans come in four colours: red, blue, silver, and green. Apart from being translucent, the fans have a chrome sputtering coating that gives a metallic sheen. Illumination is care of a patented circular LED design that gives it brilliant, radial streaks of light. In terms of functionality, the fans feature the company's twister-bearing design that extends product life. These fans are rated to serve for 100,000 hours. UCAP8 spins at speeds between 600~2100 rpm, pushing 12.48~33.04 CFM of air, while the UCAP12 spins at speeds between 700~1700 rpm to push 28.98~71.76 CFM. Both fans have a rated minimum acoustic footprint of 15 dBA. The UCAP8 and UCAP12 Apollish fans have recommended price tags of $13 and $19.5 respectively (before applicable taxes).

Coolink today introduced its new SWiF2 fan series. Successor to the popular SWiF series, the new SWiF2 family takes its successful predecessor's proven qualities one step further. Refined blade designs, high-performance hydro-dynamic bearing and support for PWM fan speed control, combined with an exciting new colour scheme, are the cornerstones of the new series.

"With more than a hundred thousand satisfied users, our Silent Whisper Fans have created a huge following among those looking for true high-end fans at a reasonable price.", says Timothy Chu, Coolink CEO. "Today, we're thrilled to revive the series with new, further improved models as well as an exciting new colour scheme. Of course, the new SWiF2 family remains true to our vision of linking excellent quality with attractive pricing."