A trend we've seen in the 2023 Computex is that SSD manufacturers aren't advertising their feisty Gen 5 NVMe SSDs with the elaborate cooling solutions that they sorely need, but rather as bare drives, with the cooling options marketed separately. In practice, manufacturers could get retailers to bundle Gen 5 SSDs with a selection of their coolers. This lets them trim some of the criticism of just how hot SSDs have gotten over just one generation. Team Group showed off its T-Force Cardea Z5 lines of M.2 Gen 5 NVMe SSDs. There are two distinct lines with the same names. One of these comes with a maximum sequential read speed of 12 GB/s, while the other comes with 14 GB/s. Both have their respective 1 TB, 2 TB, and 4 TB capacity variants. Both use 3D TLC NAND flash. The under-the-hood difference between the 12 GB/s and 14 GB/s versions of the Cardea Z5 is that while the 12 GB/s variant uses a Phison E26-series controller, the 14 GB/s one uses an InnoGrit IG5666 controller. Team Group intends to eventually re-brand the 14 GB/s variant as the Cardea Z54A series.

Team Group also announced a handful cooling solutions to pair with these Gen 5 SSDs. The most striking of these is the T-Force Siren, an all-in-one (AIO) closed loop liquid M.2 NVMe SSD cooler, with as 120 mm radiator. The name is a bit of a misnomer, as SSD coolers with 20 mm fans is what a siren might sound like. Obviously, this cooler is overkill, and helps the SSD deliver its best performance, but there are other options from the company. The T-Force AirFlow I uses two copper heatpipes that run through the base-plate, pulling heat from the controller, NAND flash, and DRAM, and pushing it through an aluminium fin-stack arranged vertically. This is then ventilated by a 30 mm fan. The T-Force Airflow II uses a slightly different approach, with a single thicker heat pipe arranged in a C-shape, with radially-projecting finnage that have the appearance of a cylinder. At the other end of this is a 30 mm fan.